Online retailer for industrial customers, commercial customers and public institutions - no sales to private customers
Switch to german languageIndustry-Electronics in English
Schneider Electric Logo

Schneider Electric ATV930C11N4 ATV930 IP00 110 kW 400 V/480 V with chopper

Your rating:
Average rating
product review for Schneider Electric ATV930C11N4 ATV930 IP00 110 kW 400 V/480 V with chopper
( 4.7 / 5 ) 3 ratings
Schneider Electric ATV930C11N4
This image may differ from the desired article.
11.192,90 EUR 11.664,18 EUR
( 13.319,55 EUR incl. VAT )
≈ £9,368.46  |  ≈ $12,301.00
Made to order · Delivery time approx. 8 workdaysinfo_outline
1x Schneider Electric ATV930C11N4 ATV930 IP00 110 kW 400 V/480 V with chopper
Lieske Part No.:1866150
Mfg Part No: ATV930C11N4
UPC/EAN: 3606481490384
Weight:128 kg
Type:ATV930C11N4
Graduated prices net
From piecesPrice per pieces
210.941,06 EUR
410.689,22 EUR
610.437,38 EUR
810.185,54 EUR

Product information for Schneider Electric ATV930C11N4:

Frequency converter, ATV930, 110kW, 380-480V, with brake module, IP20.

Complementary
Electrical connectionLine side: screw terminal 2 x 50...3 x 120 mm²/2 x 1/0 AWG...2 x 300 kcmil; DC bus: screw terminal 0.5...1.5 mm²/20 AWG...16 AWG; Control: screw terminal 0.5...1.5 mm²/20 AWG...16 AWG
Transmission rate10/100 Mbit/s for Ethernet IP/Modbus TCP; 4.8, 9.6, 19.2, 38.4 kbit/s for Modbus serial
Data format8 bits, configurable odd, even or no parity for Modbus serial
Type of polarizationNo impedance for Modbus serial
Number of addresses1…247 for Modbus serial
Local signallingLocal diagnostic: 3 LEDs (mono/dual colour); 5 LEDs (dual colour); 2 LEDs (dual colour); 1 LED (red)
IsolationBetween power and control terminals
Discrete input number10
Relay output typeConfigurable relay logic R1: fault relay NO/NC electrical durability 100000 cycles; Configurable relay logic R2: sequence relay NO electrical durability 1000000 cycles; Configurable relay logic R3: sequence relay NO electrical durability 1000000 cycles
Physical interfaceEthernet; 2-wire RS 485
Connector type2 RJ45; 1 RJ45
Method of accessSlave Modbus TCP
Transmission frameRTU
4 quadrant operation possibleTrue
Asynchronous motor control profileConstant torque standard; Variable torque standard; Optimized torque mode
Synchronous motor control profilePermanent magnet motor; Synchronous reluctance motor
Maximum output frequency599 Hz
Acceleration and deceleration rampsLinear adjustable separately from 0.01...9999 s; S, U or customized
Motor slip compensationAdjustable; Automatic whatever the load; Can be suppressed; Not available in permanent magnet motor law
Switching frequency1...8 kHz adjustable; 2.5...8 kHz with derating factor
Nominal switching frequency2.5 kHz
Braking to standstillBy DC injection
Brake chopper integratedTrue
Line current201.0 A at 380 V (normal duty); 170.0 A at 380 V (heavy duty); 165.0 A at 480 V (normal duty); 143.0 A at 480 V (heavy duty)
Maximum input current201.0 A
Maximum output voltage480.0 V
Apparent power121.8 kVA at 380...480 V (normal duty); 102.6 kVA at 380...480 V (heavy duty)
Maximum transient current253 A during 60 s (normal duty); 259.5 A during 60 s (heavy duty)
Network frequency50...60 Hz
Prospective line Isc50 kA
Base load current at high overload173.0 A
Base load current at low overload211.0 A
With safety function Safely Limited Speed (SLS)True
With safety function Safe brake management (SBC/SBT)True
With safety function Safe Operating Stop (SOS)False
With safety function Safe Position (SP)False
With safety function Safe programmable logicFalse
With safety function Safe Speed Monitor (SSM)False
With safety function Safe Stop 1 (SS1)True
With sft fct Safe Stop 2 (SS2)False
With safety function Safe torque off (STO)True
With safety function Safely Limited Position (SLP)False
With safety function Safe Direction (SDI)False
Protection typeThermal protection: motor; Safe torque off: motor; Motor phase break: motor; Thermal protection: drive; Safe torque off: drive; Overheating: drive; Overcurrent between output phases and earth: drive; Overload of output voltage: drive; Short-circuit protection: drive; Motor phase break: drive; Overvoltages on the DC bus: drive; Line supply overvoltage: drive; Line supply undervoltage: drive; Line supply phase loss: drive; Overspeed: drive; Break on the control circuit: drive
Quantity per set1
Width320 mm
Height1205 mm
Depth393 mm
Net weight104 kg
Contractual warranty
Warranty (in months)18
Environment
Insulation resistance> 1 MOhm 500 V DC for 1 minute to earth
Noise level69.9 dB conforming to 86/188/EEC
Vibration resistance1.5 mm peak to peak (f= 2…13 Hz) conforming to IEC 60068-2-6; 1 gn (f= 13…200 Hz) conforming to IEC 60068-2-6
Shock resistance6 gn for 11 ms conforming to IEC 60068-2-27
Environmental characteristicChemical pollution resistance class 3C3 conforming to IEC 60721-3-3; Dust pollution resistance class 3S3 conforming to IEC 60721-3-3
Relative humidity5…95 % without condensation conforming to IEC 60068-2-3
Ambient air temperature for operation-15…50 °C (without derating); 50…60 °C (with derating factor)
Operating positionVertical +/- 10 degree
Product certificationsUL; CSA; TÜV
MarkingCE
StandardsUL 508C; IEC 61800-3; IEC 61800-5-1; IEC 61000-3-12; IEC 60721-3; IEC 61508; IEC 13849-1
Assembly styleEnclosed
Electromagnetic compatibilityElectrostatic discharge immunity test level 3 conforming to IEC 61000-4-2; Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3; Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4; 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5; Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6
Environmental class (during operation)Class 3C3 according to IEC 60721-3-3; Class 3S3 according to IEC 60721-3-3
Maximum acceleration under shock impact (during operation)150 m/s² at 11 ms
Maximum acceleration under vibrational stress (during operation)10 m/s² at 13...200 Hz
Maximum deflection under vibratory load (during operation)1.5 mm at 2...13 Hz
Permitted relative humidity (during operation)Class 3K5 according to EN 60721-3
Overvoltage categoryIII
Regulation loopAdjustable PID regulator
Pollution degree2
Ambient air transport temperature-25…70 °C
Ambient air temperature for storage-25…70 °C
Logistical informations
Country of originCN
Main
Range of productAltivar Process ATV900
Product specific applicationProcess for industrial
Product or component typeVariable speed drive
VariantStandard version; With braking chopper
Device applicationIndustrial application
Product destinationSynchronous motors; Asynchronous motors
Network number of phases3 phases; Single phase
Mounting modeWall mount
Continuous output current211 A at 4 kHz for normal duty; 173 A at 4 kHz for heavy duty
Communication port protocolEthernet IP/Modbus TCP; Modbus
[Us] rated supply voltage380...480 V - 15...10 %
Relative symmetric mains voltage tolerance10 %
Relative symmetric network frequency tolerance5 %
nominal output current211.0 A
Motor power kW110.0 kW for normal duty; 90.0 kW for heavy duty
EMC filterIntegrated; With EMC plate option
IP degree of protectionIP21
Degree of protectionUL type 1
Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height71.000 cm
Package 1 Width50.000 cm
Package 1 Length141.000 cm
Package 1 Weight128.000 kg


Please note...
This article has over-size and needs to be seperately taken care of. This is why we want to inform you, that the calculation of the delivery charges in the shopping cart will disregard this aspect. Though, there will be corresponding surcharges after you send us your order.

Questions & answers

What is the delivery time of Schneider Electric ATV930C11N4 ATV930 IP00 110 kW 400 V/480 V with chopper?

The article Schneider Electric ATV930C11N4 ATV930 IP00 110 kW 400 V/480 V with chopper is currently not in stock and must be ordered on a per-order basis.

According to our experience the article is ready for dispatch within 8 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Schneider Electric ATV930C11N4 to our sales team for an exact delivery time.

How can I buy the item at a lower price?

We offer you Schneider Electric ATV930C11N4 ATV930 IP00 110 kW 400 V/480 V with chopper always at the best possible price. We can give you a discount of 2% on Schneider Electric ATV930C11N4 ATV930 IP00 110 kW 400 V/480 V with chopper if you choose payment in advance on ordering.

In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 2 pieces of Schneider Electric ATV930C11N4 ATV930 IP00 110 kW 400 V/480 V with chopper we can offer you a price of 10.941,06 EUR per piece. The more you buy, the cheaper the article will be.

We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

 


This product is recommended as accessory for

Schneider Electric VW3A7747 brake resistor 2 Schneider Electric LogoSchneider Electric VW3A7747 brake resistor 2 Braking resistor, for ATV930C11N4C - C16N4C drives. Reference values for an average braking cycle. Power VA 11 kW, protection class IP23, resistance 2.5 O at 20 °C. Supply voltage 200-240 V or ...

Lieske Part No.: 323131
Mfg Part No: VW3A7747
3.616,65 EUR 3.768,93 EUR
Schneider Electric VW3A7747 plus VAT
≈ £3,027.14  |  ≈ $3,974.70
Made to order · Delivery time approx. 8 workdaysinfo_outline

Fitting accessory for Schneider Electric ATV930C11N4 ATV930 IP00 110 kW 400 V/480 V with chopper

Schneider Electric LC1D115U7 contactor 3-pole 1NO1NC 55 kW 400 V AC3 115 A 240 V AC Schneider Electric LogoSchneider Electric LC1D115U7 contactor 3-pole 1NO1NC 55 kW 400 V AC3 115 A 240 V AC TeSys LC1D power contactor. 3-pole, 3 NO contacts. Additional auxiliary contacts - 1 NO + 1 NC contact, rated operating power at AC-3, 400 V 55 kW, rated operating current Ie at AC-3, 400 V 115 A, ...

Lieske Part No.: 1771485
Mfg Part No: LC1D115U7
-6% 706,12 EUR 755,15 EUR
Schneider Electric LC1D115U7 plus VAT
≈ £591.02  |  ≈ $776.03
Made to order · Delivery time approx. 10 workdaysinfo_outline
Schneider Electric VW3A95116 through-frame set ATVP BG6 Schneider Electric LogoSchneider Electric VW3A95116 through-frame set ATVP BG6 The article VW3A95116 from Schneider Electric is a mounting kit for through-mounting of inverter power units of size 6 from the Altivar Process ATV600 and ATV900 product families. It is designed for ...

Lieske Part No.: 1869060
Mfg Part No: VW3A95116
1.342,35 EUR 1.398,87 EUR
Schneider Electric VW3A95116 plus VAT
≈ £1,123.55  |  ≈ $1,475.24
Made to order · Delivery time approx. 8 workdaysinfo_outline
Searching
Search is performed.
Please be patient ...
Fehlende Felder
Close
Product in the shopcart

The following item has been put into your shopping cart by our system:

1x Schneider Electric ATV930C11N4 frequency converter 110 kW 400 V
Schneider Electric ATV930C11N4 ATV930 IP00 110 kW 400 V/480 V with chopper
11.192,90 EUR
Sum of all articles in cart
plus VAT
You can continue shopping and open your cart at any time from the top menu bar or now directly by clicking the button.
Enquiry: Schneider Electric ATV930C11N4 frequency converter 110 kW 400 V
Company name
Name
Homepage
Street
ZIP-Code City
Country
Telephone
Desired quantity
Comment
6 + 7 =
Data protection notice: The data entered here will only be electronically stored and processed for the purpose of responding to your inquiry in accordance with Art. 6 GDPR para. 1b. The basis for this is our privacy policy.
Name and email address are the only mandatory fields.

We use cookies. Some are required to run the shop (e.g. shopping cart and login), others help us improve it (Google Analytics). Statistics cookies are only used with your consent. See our privacy policy for details.