Schneider Electric ABE7R16S210 terminal block 16 channels content_copy

This product is part of the Modicon ABE7 range, a range of connection bases for the Telefast pre-wired system. The connection base with soldered electromechanical relay offers 16 channels. It has a normally open contact for pre-actuation. This product allows the quick connection of I/O modules. It is a relay subassembly with a supply voltage of 24 V DC and a maximum current of 10 A per output. It offers an electrical life of approximately 500000 operating cycles. It is a product with IP2x protection rating. Its dimension is 206 mm (width). It weighs 0.405 kg. It is suitable for all types of industrial applications. This product is certified by GL, CSA, DNV, BV, LROS and UL. Fixing is done by brackets (35mm symmetrical DIN rail) and screws (solid plate with fixing kit). Modicon ABE7 simplifies wiring in automation systems. Pre-wired system that allows the connection and adaptation of the control signals of PLC cards equipped with HE10 connectors.

Complementary
Terminal block type	Removable
Polarity distribution	Volt-free
Fixing mode	By clips (35 mm symmetrical DIN rail); By screws (solid plate with fixing kit)
Maximum current per output common	10 A
Current per channel	5 A for preactuator end
Minimum switching current	10 mA at >= 5 V
Drop-out voltage	2.4 V at 20 °C (PLC end)
Threshold tripping voltage	19.7 V at 40 °C
Drop-out current	1 mA at 20 °C
Maximum power dissipation per channel in W	0.36 W (PLC end)
Contacts type and composition	1 NO for preactuator end
Maximum switching voltage	250 V AC 50/60 Hz conforming to IEC 60947-5-1; 30 V DC conforming to IEC 60947-5-1
Electrical durability	500000 cycles, maximum switching current: 600 mA at 24 V DC-13 10 ms (preactuator end); 500000 cycles, maximum switching current: 1500 mA at 230 V AC-12 (preactuator end); 500000 cycles, maximum switching current: 1500 mA at 24 V DC-12 (preactuator end); 500000 cycles, maximum switching current: 900 mA at 230 V AC-15 (preactuator end)
electrical reliability	1e-008
Operating rate in Hz	10 Hz no load; 0.5 Hz at Ie
Mechanical durability	20000000 cycles
[Uimp] rated impulse withstand voltage	2.5 kV conforming to IEC 60947-1
[Ui] rated insulation voltage	2000 V
Installation category	II conforming to IEC 60664-1
Tightening torque	0.6 N.m with flat Ø 3.5 mm screwdriver
Width	206 mm
Net weight	0.405 kg
Contractual warranty
Warranty (in months)	18
Environment
Max immunity to microbreaks	5 ms
Dielectric strength	2000 V conforming to IEC 60947-1
Product certifications	GL; CSA; DNV; UL; EAC
IP degree of protection	IP2X conforming to IEC 60529
Protective treatment	TC
Resistance to incandescent wire	750 °C, extinction time
Shock resistance	15 gn for 11 ms conforming to IEC 60068-2-27
Resistance to radiated fields	10 V/m (26000000…1000000000 Hz) conforming to IEC 61000-4-3 level 3
Resistance to fast transients	2 kV level 3 conforming to IEC 61000-4-4
Ambient air temperature for operation	-5…60 °C conforming to IEC 61131-2
Ambient air temperature for storage	-40…80 °C conforming to IEC 61131-2
Pollution degree	2 conforming to IEC 60664-1
Logistical informations
Country of origin	LV
Main
Range of product	Modicon ABE7
Product or component type	Electromechanical output relay sub-base
[Us] rated supply voltage	24 V DC for PLC end
Number of channels	16
Number of terminal per channel	2
Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	7.000 cm
Package 1 Width	8.200 cm
Package 1 Length	21.100 cm
Package 1 Weight	581.000 g
Unit Type of Package 2	S03
Number of Units in Package 2	15
Package 2 Height	30.000 cm
Package 2 Width	30.000 cm
Package 2 Length	40.000 cm
Package 2 Weight	9.103 kg

---