Schneider Electric A9A26917 Schneider Remote control switch Acti9 iSD 1We2mA b.100mA 24VAC b.250VAC

This Acti9 electrical accessory is a changeover contact (NO/NC) to indicate the position of the circuit breaker in the event of an electrical fault or trip. Operating current is between 2mA and 100mA at a frequency of 50Hz to 60Hz at 24VAC to 240VAC &, 24VDC to 220VDC. Fault, signaling contact. Intended for installations in small commercial premises, buildings, critical infrastructure, healthcare, industry, data centers. This electrical accessory is compatible with Acti9 ranges such as iC60, iID, iDPN ARC, iDPN Vigi, iDPN Vigi ARC, iSW, iC40, iC40 ARC, iCV40, iC40 XA, iCV40 XA and iC60 RCBO. This fault contact is compatible with Acti9 ranges such as Acti9 iDT40, iDT40 XA, iDD40 and iKQE RCBO. Screw terminal connection on the bottom. The connection allows rigid copper cables. The cable cross section ranges from 1mm² to 4mm². The iSD is used for either the device short name or the compatibility code. The mechanical indicator is provided on the product for signaling (local). It has a screw terminal connection on the bottom. The connection is suitable for rigid copper cables. The cable cross section ranges from 1mm² to 4mm². Screw terminal connection on the bottom allows a cable cross section of 0.5mm² to 2.5mm² for flexible copper cables. Screw terminal connection on the bottom. The connection allows rigid copper cables. The cable cross section 2 cables allows a cable cross section of 2.5mm². It has a screw terminal connection on the bottom. The connection is possible flexibly with ferrule copper cables (2 cables). The cable cross-section is 1.5 mm². The rated insulation voltage (Ui) is up to 500 V. The rated impulse voltage (Uimp) is 4kV. The width in 9 mm increments is 1. The dimensions are (W) 9 mm x (H) 86 mm x (D) 73 mm. The color of the product is white (RAL 9003). The pollution degree is 3. The tropicalization degree is treatment 2. The tightening torque of the connection is 1N.m (bottom) for the screwdriver type PZ1. According to the IEC 60529 standard, the IP protection degree is IP20. The operating temperature is between -25°C and +70°C. The storage temperature ranges from -40°C to +85°C. This product complies with EN/IEC 60947-5-1 and EN/IEC 60947-5-4. This product is certified with CE and UKCA marks.
Type: A9A26917