Schneider Electric 18623 power switch NG125N 2-pole C 20A
|
192,85 EUR 200,97 EUR |
|||||||||||
|
( 229,49 EUR incl. VAT ) ≈ £161.22 | ≈ $213.10 plus delivery charges: 55,00 € |
|||||||||||
| Made to order · Delivery time approx. 18 workdaysinfo_outline | |||||||||||
| Datasheet: | file_download Download | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Lieske Part No.: | 1773554 | ||||||||||
| Mfg Part No: | 18623 | ||||||||||
| UPC/EAN: | 3303430186236 | ||||||||||
| Weight: | 0.48 kg | ||||||||||
| Type: | 18623 | ||||||||||
|
Graduated prices net
|
|||||||||||
Further Breakers and disconnectors from Schneider ElectricFurther products in category Breakers and disconnectors
All products of Schneider Electric
Product information for Schneider Electric 18623:
Acti 9 NG125N circuit breaker, 25kA (IEC/EN 60947-2). 1-pole, nominal current 20A, C characteristic, operating voltage (Ue) 380-415V AC, insulation voltage (Ui) 690V AC. Protection of the circuit against short-circuit currents. Protection of the circuit against overload currents. Tripping is indicated by the middle position of the switch knob and by a red, mechanical display on the front of the device. Test button for checking the tripping mechanism. Power supply from above or below. Snap action for low-wear switching of the contacts. Technology of the tripping unit - thermomagnetic. Additional auxiliary modules that can be added in series (optional) - display of switch position, fault tripping, shunt release, undervoltage release, overvoltage release. The NG125N circuit breaker meets the following standards - IEC/EN 60947-2. Furthermore, this series is VDE certified.
| Complementary | |
| Network frequency | 50/60 Hz |
| [Ue] rated operational voltage | 380...415 V AC 50/60 Hz; 500 V AC 50/60 Hz; 220...240 V AC 50/60 Hz; 440 V AC 50/60 Hz; |
| Magnetic tripping limit | 8 x In |
| [Ics] rated service breaking capacity | 37.5 kA 75 % conforming to EN/IEC 60947-2 - 220...240 V AC 50/60 Hz; 18.75 kA 75 % conforming to EN/IEC 60947-2 - 380...415 V AC 50/60 Hz; 15 kA 75 % conforming to EN/IEC 60947-2 - 440 V AC 50/60 Hz; 7.5 kA 75 % conforming to EN/IEC 60947-2 - 500 V AC 50/60 Hz; 25 kA 100 % conforming to EN/IEC 60947-2 - 250 V DC |
| [Ui] rated insulation voltage | 690 V AC 50/60 Hz conforming to EN/IEC 60947-2 |
| [Uimp] rated impulse withstand voltage | 8 kV conforming to EN/IEC 60947-2 |
| Control type | Toggle; Manual tripping test |
| Local signalling | ON/OFF indication; Trip indicator |
| Mounting mode | Clip-on |
| Mounting position | Vertical |
| Mounting support | 35 mm symmetrical DIN rail |
| 9 mm pitches | 6 |
| Height | 103 mm |
| Depth | 81 mm |
| Width | 54 mm |
| Net weight | 0.48 kg |
| Mechanical durability | 20000 cycles |
| Electrical durability | 10000 cycles |
| Provision for padlocking | Padlockable |
| Locking options description | Integrated padlocking |
| Connections - terminals | Tunnel type terminals1.5…50 mm² rigid; Tunnel type terminals1…35 mm² flexible |
| Wire stripping length | 20 mm |
| Tightening torque | 3.5 N.m |
| Earth-leakage protection | Separate block |
| Contact position indicator | |
| Comb busbar and distribution block compatibility | |
| Contractual warranty | |
| Warranty (in months) | 18 |
| Environment | |
| IP degree of protection | IP20 conforming to IEC 60529 |
| IK degree of protection | IK05 conforming to EN/IEC 62262 |
| Pollution degree | 3 conforming to IEC 60947-2 |
| Overvoltage category | IV |
| Tropicalisation | 2 conforming to IEC 60068-1 |
| Relative humidity | 95 % at 55 °C |
| Ambient air temperature for operation | -30…70 °C |
| Ambient air temperature for storage | -40…70 °C |
| Logistical informations | |
| Country of origin | FR |
| Main | |
| Range | Acti9 |
| Product name | Acti9 NG125 |
| Product or component type | Miniature circuit-breaker |
| Device short name | NG125N |
| Device application | Distribution |
| Poles description | 2P |
| Number of protected poles | 2 |
| [In] rated current | 20 A at 40 °C |
| Network type | DC; AC |
| Trip unit technology | Thermal-magnetic |
| Curve code | C |
| Breaking capacity | 10 kA Icu at 500 V AC 50/60 Hz conforming to EN/IEC 60947-2; 20 kA Icu at 440 V AC 50/60 Hz conforming to EN/IEC 60947-2; 25 kA Icu at 380...415 V AC 50/60 Hz conforming to EN/IEC 60947-2; 50 kA Icu at 220...240 V AC 50/60 Hz conforming to EN/IEC 60947-2; 20 kA Icu at |
| Utilisation category | Category A conforming to IEC 60947-2 |
| Suitability for isolation | Yes conforming to IEC 60947-2 |
| Standards | EN/IEC 60947-2 |
| Packing Units | |
| Unit Type of Package 1 | PCE |
| Number of Units in Package 1 | 1 |
| Package 1 Height | 5.8 cm |
| Package 1 Width | 8.1 cm |
| Package 1 Length | 11 cm |
| Package 1 Weight | 477 g |
| Unit Type of Package 2 | BB1 |
| Number of Units in Package 2 | 6 |
| Package 2 Height | 9.1 cm |
| Package 2 Width | 11.9 cm |
| Package 2 Length | 35.8 cm |
| Package 2 Weight | 2.948 kg |
| Unit Type of Package 3 | S03 |
| Number of Units in Package 3 | 36 |
| Package 3 Height | 30 cm |
| Package 3 Width | 30 cm |
| Package 3 Length | 40 cm |
| Package 3 Weight | 18.211 kg |
Questions & answers
What is the delivery time of Schneider Electric 18623 power switch NG125N 2-pole C 20A?
The article Schneider Electric 18623 power switch NG125N 2-pole C 20A is currently not in stock and must be ordered on a per-order basis.
According to our experience the article is ready for dispatch within 18 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Schneider Electric 18623 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Schneider Electric 18623 power switch NG125N 2-pole C 20A always at the best possible price. We can give you a discount of 2% on Schneider Electric 18623 power switch NG125N 2-pole C 20A if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 5 pieces of Schneider Electric 18623 power switch NG125N 2-pole C 20A we can offer you a price of 181,28 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.
This product is recommended as accessory for
 |
Schneider Electric 19012 earth fault module Vigi NG125 63 A 2p 230-415 V 300 mA
FI-Block Acti 9 Vigi NG125. 2-pole, nominal current 63A, nominal residual current 300mA, type A, operating voltage (Ue) 400-415V AC, insulation voltage (Ui) 690V AC. Can be mounted on the right-hand ... Lieske Part No.: 1770320 Mfg Part No: 19012 |
425,60 EUR 443,52 EUR
 ≈ £355.80 | ≈ $470.29
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
 |
Schneider Electric 19010 residual current block 2-pole 63A 30mA type A
FI-Block Acti 9 Vigi NG125. 2-pole, nominal current 63A, nominal residual current 30mA, type A, operating voltage (Ue) 400-415V AC, insulation voltage (Ui) 690V AC. Can be mounted on the right-hand ... Lieske Part No.: 1774169 Mfg Part No: 19010 |
470,25 EUR 490,05 EUR
≈ £393.13 | ≈ $519.63
Made to order · Delivery time approx. 10 workdaysinfo_outline
|
Fitting accessory for Schneider Electric 18623 power switch NG125N 2-pole C 20A
 |
Schneider Electric 19067 undervoltage release MN 230-240 VAC
Undervoltage release Acti 9 MN. Operating voltage (Ue) 230-240V AC. Causes the device with which it is combined to trip when the input voltage drops. Prevents the device from closing until the input ... Lieske Part No.: 376237 Mfg Part No: 19067 |
173,38 EUR 180,68 EUR
≈ £144.95 | ≈ $191.58
Made to order · Delivery time approx. 7 workdaysinfo_outline
|
 |
Schneider Electric 19072 auxiliary switch 1W OF 1W SD 240 V AC 6 A
Auxiliary switch + fault signaling switch Acti 9 OF+SD. For NG125 and FI block Vigi NG125, 1W. Remote signaling and evaluation of the switch position and fault tripping of the NG125. Lieske Part No.: 376244 Mfg Part No: 19072 |
53,77 EUR 56,03 EUR
≈ £44.95 | ≈ $59.42
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
 |
Schneider Electric 19071 auxiliary switch 2W 240 VAC 6 A
Auxiliary switch Acti 9 OF/OF. For NG125 and FI block Vigi NG125, 2W, 250V AC. 2 changeover contacts, to indicate the switching position of the NG125. Lieske Part No.: 464197 Mfg Part No: 19071 |
54,34 EUR 56,63 EUR
≈ £45.43 | ≈ $60.05
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
 |
Schneider Electric 19064 operating current release MX 230-415 V AC 110-130 V
Acti 9 MX shunt release + auxiliary contact OF. Operating voltage (Ue) 230-415V AC, 110-130V DC. Causes the associated device to trip when the shunt release is activated. Lieske Part No.: 592870 Mfg Part No: 19064 |
129,67 EUR 135,14 EUR
≈ £108.40 | ≈ $143.29
Made to order · Delivery time approx. 10 workdaysinfo_outline
|
 |
Schneider Electric 19090 locking elements Ng125 (4 pcs)
Locking element for NG125. In the ON or OFF position of the NG125 1-pole and 2-pole circuit breaker. In the ON position of the NG125 3-pole and 4-pole circuit breaker. This locks the circuit breaker ... Lieske Part No.: 592882 Mfg Part No: 19090 |
40,09 EUR 41,78 EUR
≈ £33.52 | ≈ $44.30
Made to order · Delivery time approx. 10 workdaysinfo_outline
|
 |
Schneider Electric 19091 multiple connection terminals (4 pcs)
The multi-connection terminals 19091 from Schneider Electric are specifically designed for use with circuit breakers from the ComPacT INS product family. These are terminals for secure and reliable ... Lieske Part No.: 592891 Mfg Part No: 19091 |
136,80 EUR 142,56 EUR
≈ £114.36 | ≈ $151.16
Made to order · Delivery time approx. 7 workdaysinfo_outline
|
 |
Schneider Electric A9MEM1560 Power Tag Flex 1P+N
The PowerTag Energy F63 1P+N is a wirelessly communicating energy meter. With its flexible design, it is suitable for 1P+N measuring points with a nominal power of 63A or less. The energy meter must ... Lieske Part No.: 1263397 Mfg Part No: A9MEM1560 |
-16% 81,89 EUR 97,00 EUR
≈ £68.46 | ≈ $90.49
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
 |
Schneider Electric 19085 terminal screw cover for NG125
Terminal screw cover for NG125. 2-pin. Prevents any contact with the terminal screws. Offers protection against direct contact (IP 40- in the distributor, IP 20- device alone). Class II for steel or ... Lieske Part No.: 1769222 Mfg Part No: 19085 |
43,51 EUR 45,34 EUR
≈ £36.37 | ≈ $48.08
Made to order · Delivery time approx. 15 workdaysinfo_outline
|
|
|
Schneider Electric 19012 earth fault module Vigi NG125 63 A 2p 230-415 V 300 mA
FI-Block Acti 9 Vigi NG125. 2-pole, nominal current 63A, nominal residual current 300mA, type A, operating voltage (Ue) 400-415V AC, insulation voltage (Ui) 690V AC. Can be mounted on the right-hand ... Lieske Part No.: 1770320 Mfg Part No: 19012 |
425,60 EUR 443,52 EUR
≈ £355.80 | ≈ $470.29
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
 |
Schneider Electric 19081 terminal covers 2-pole
Terminal cover for circuit breaker NG125. 2-pole, insulation voltage (Ui) 1000V (Ph/Ph), suitable for NG125. Prevents any contact with the connection terminals. Offers protection against direct ... Lieske Part No.: 1773549 Mfg Part No: 19081 |
42,08 EUR 43,86 EUR
≈ £35.18 | ≈ $46.50
Made to order · Delivery time approx. 8 workdaysinfo_outline
|
 |
Schneider Electric 19061 undervoltage release MNx 220-240 VAC
Undervoltage release Acti 9 MNx. Operating voltage (Ue) 220-240V AC. The associated device is triggered by opening the control circuit. A drop in the supply voltage does not trigger the associated ... Lieske Part No.: 1773550 Mfg Part No: 19061 |
202,35 EUR 210,87 EUR
≈ £169.16 | ≈ $223.60
Made to order · Delivery time approx. 18 workdaysinfo_outline
|
 |
Schneider Electric 19066 MX+OF 24 V AC 24 V DC
Acti 9 MX shunt release + auxiliary contact OF. Operating voltage (Ue) 24V AC, 24V DC. Causes the associated device to trip when the shunt release is activated. Lieske Part No.: 1773673 Mfg Part No: 19066 |
129,67 EUR 135,14 EUR
≈ £108.40 | ≈ $143.29
Made to order · Delivery time approx. 18 workdaysinfo_outline
|
|
|
Schneider Electric 19010 residual current block 2-pole 63A 30mA type A
FI-Block Acti 9 Vigi NG125. 2-pole, nominal current 63A, nominal residual current 30mA, type A, operating voltage (Ue) 400-415V AC, insulation voltage (Ui) 690V AC. Can be mounted on the right-hand ... Lieske Part No.: 1774169 Mfg Part No: 19010 |
470,25 EUR 490,05 EUR
≈ £393.13 | ≈ $519.63
Made to order · Delivery time approx. 10 workdaysinfo_outline
|
 |
Schneider Electric 19096 3xmultiple connection terminals set=3 pcs
Multiple cable clamps for NG125. Tightening torque 2Nm, stripping length 11mm. Connection terminals for 3 copper conductors. Rigid up to 16mm², flexible up to 10mm². Pack of 3 per bag. Lieske Part No.: 1774531 Mfg Part No: 19096 |
126,35 EUR 131,67 EUR
≈ £105.63 | ≈ $139.62
Made to order · Delivery time approx. 10 workdaysinfo_outline
|
Altenative Products for Schneider Electric 18623 power switch NG125N 2-pole C 20A
 |
Schneider Electric A9F94220 LS-switch iC60L 2-pole C 20A
Circuit breaker Acti 9 iC60L, 15kA (IEC/EN 60898-1), 25kA (IEC/EN 60947-2). 2-pole, nominal current 20A, C characteristic, operating voltage (Ue) 380-415V AC, insulation voltage (Ui) 500V AC. Double ... Lieske Part No.: 712383 Mfg Part No: A9F94220 |
151,53 EUR 157,91 EUR
≈ £126.68 | ≈ $167.44
Made to order · Delivery time approx. 8 workdaysinfo_outline
|