Relco RL7327 transformer 5501/PSC NERO 20-80W 230/12V TF+Reg content_copy

The Relco RL7327 is an electronic dimmer transformer of the 5501/PSC-N series, designed for an operating voltage of 220–240 V at 50/60 Hz and an output voltage of 12 V. It is used for power supply and stepless brightness control of lighting installations with resistive loads as well as devices of protection class III. The device is housed in a black-painted housing with dimensions 106 mm × 57 mm × 34 mm. The design allows integration into Home Automation systems, particularly when using a switched socket.

Applications
This transformer is intended for indoor use where stepless brightness control of 12 V lighting systems is required. It is particularly suitable for applications in residential and commercial buildings where flexible light control via sensors or switches is desired. Use is limited to resistive loads and lighting devices of class III, including compatibility with LED strips, incandescent lamps, or other passive loads.

Functions and Features in Detail
The RL7327 enables stepless regulation of light intensity, with adjustment possible via either a sensor or a switch. The sensor is independent of mains polarity, simplifying installation. The maximum distance between the electronic control unit and the sensor is 2 metres. The set brightness level is retained even during brief power interruptions, ensuring the lighting resumes in the previous state once power is restored. The Soft Start and Soft Stop functions provide gentle switching on and off of the lighting, which can extend lamp life.

Technology Explained Simply
The transformer operates using an electronic circuit that reduces the input voltage of 220–240 V to 12 V. The output power ranges from 20 to 80 W, sufficient for a wide range of 12 V lighting systems. The integrated protection features include a non-resettable fuse resistor for overload protection, as well as a resettable protection against short circuit and overload. Additionally, the device is protected against transient overvoltages, enhancing reliability.

Compatibility and Accessories
The device is designed for use with resistive loads and lighting devices of class III. It can be used in systems controlled via a switched socket, for example in Smart-Home applications. The information on the nameplate must be observed, and the device should be kept away from heat sources to ensure proper function and longevity.

Mounting and Installation
Installation must take place in a suitable, well-ventilated, and dry environment. The device must not be installed in close proximity to heat sources. Compliance with the information on the nameplate is required to ensure safety and functionality. Installation is typically carried out in an electrical distribution board or enclosure, with wiring conforming to applicable standards.

Operational Advantages
The RL7327 provides reliable and flexible control of 12 V lighting systems. Stepless dimming allows for individual lighting design, while integrated protection functions enhance safety. The retention of brightness level during power interruption ensures a consistent user experience. Use in Home Automation systems is possible, as the device can also be operated via a switched socket. The Soft Start and Soft Stop functions reduce mechanical stress and extend the life of lighting components.

General
Input voltage	220-240 V
Frequency	50/60 Hz
Output voltage	12 V
Output power	20-80 W
Colour housing	Black
Degree of protection	not specified
Protection functions	non-resettable fuse resistor, resettable protection against short circuit and overload, protection against transient overvoltages
Regulation	Continuously adjustable via sensor or push-button
Sensor-electronics distance	max. 2 m
Brightness storage	yes, also during power interruption
Application range	Switched socket, Home Automation
Utilization	Resistive loads, Class III lighting equipment
Soft Start
Soft Stop

---