Accessories from Regiolux

Structural accessories L-shaped node for SDT IP20. Node suitable for pendant mounting, order through-wiring set SDT-KDV separately. Suspension is not possible on the light strip connector, accessory for SDT system.
Lieske Part No.: 975517

Structural accessories Wiring kit for node 2xmale+female 7-pin, 7x2.5mm², 600mm for SDT. Wiring kit node Wiring kit node 2xmale+female 7-pin, 7x2.5mm², 600mm for SDT. Connection plugs and sockets are included in delivery. Accessories for SDT system.
Lieske Part No.: 815520

Mounting accessories 0°-40° for SDTT. Hanging set 0°-40° for SDT.
Lieske Part No.: 1439774

Protective accessories front side for SRBK IP64. End caps IP64
Lieske Part No.: 1056478

Mounting accessories fastening for SRT to ceiling. Ceiling fastener, fastening for SRT to ceiling.
Lieske Part No.: 1056482

Mounting accessories decorative rope suspension, metal ceiling cylinder, l=2000mm for SRT. Single rope suspension.
Lieske Part No.: 1867571

Mounting accessories chain hanger for SRT. Chain hook M6 for SRT, ATS.
Lieske Part No.: 1867572

Structural accessories Rail connector detachable for SRT IP64. Connector IP64
Lieske Part No.: 1867573

Protective accessories front side for SRT. End caps IP20 (2 pcs.)
Lieske Part No.: 1056483

Protective accessories front side for SRT. End caps IP20 (2 pcs.)
Lieske Part No.: 1867565

Protective accessories front side for SRT IP40/64. End caps IP64 (2 pcs.)
Lieske Part No.: 1867739

Mounting accessories: round canopy D=130mm H=45mm, rope L=1900mm D=1.5mm, branching with three cross ropes L=200mm, white connecting cable 5x0.75qmm and 5-pin connecting terminal with plug-in contact technology, for turas-TUARO/380 and turas-TUAQO. Round canopy made of metal, painted, diameter 130mm, height 45mm. Middle rope length 1900mm, diameter 1.5mm. Branching with three cross ropes length 200mm. White connecting cable 5x0.75qmm and 5-pin connecting terminal (3+2) with plug-in contact technology.. Y-rope pendulum with electrical connection, for turas-TUARO and turas-TUAQO..
Lieske Part No.: 1955463

Mounting accessories Canopy made of sheet steel, round, D=130mm H=45mm, rope L=1900mm D=1.5mm, branching with three cross ropes L=200mm, white connecting cable 5x0.75qmm and 5-pin connecting terminal with plug-in contact technology, for turas-TUARO/500. Canopy made of painted sheet steel, round, diameter 130mm, height 45mm. Middle rope length 1900mm, diameter 1.5mm. Branching with three cross ropes length 200mm. White connecting cable 5x0.75qmm and 5-pin connecting terminal (3+2) with plug-in contact technology.. Y-rope pendulum with electrical connection, for turas-TUARO..
Lieske Part No.: 1893802

Mounting accessories for DESB, DESSB. Reinforcement insert for mineral fibre ceilings module 625 x 625 mm
Lieske Part No.: 893402

Mounting accessories chain carabiner for CDH/CKH. Snap hook 1xø6mm and 1xø10mm for CDH/CKH.
Lieske Part No.: 1857773

Mounting accessories, rigid ceiling bracket for athletes, workers. Ceiling mounting bracket, rigid ceiling bracket for athletes, workers.
Lieske Part No.: 1329820

Mounting accessories suspension set chain carabiner for workers, athletes. Suspension set chain carabiner for workers, athletes.
Lieske Part No.: 1342710

Mounting accessories chain carabiner set for Y-suspension. Chain carabiner set for Y-suspension.
Lieske Part No.: 1342709

Mounting accessories suspension set chain carabiner and cable screw connection for ballea. Suspension set chain carabiner with cable screw connection for ballea-BAM.
Lieske Part No.: 1980655

Mounting accessories mounting frame for scota 220. Ceiling mounting frame 220 mounting frame for scota 220.
Lieske Part No.: 1056447

Mounting accessories mounting frame for relo 190. Ceiling mounting frame 190 mounting frame for relo 190.
Lieske Part No.: 1056448

Mounting accessories PS suspension set for chain/rope. Wire bracket for chain suspension, PS suspension set for chain/rope.
Lieske Part No.: 1353182

Lieske Part No.: 1087004

Lieske Part No.: 1087005

Electrical accessories 5x1.5mm² for PSO. Through wiring 5x1.5mm². for PSO.
Lieske Part No.: 1010448

Mounting accessories installation frame for lowea 625. Installation frame for cut-out ceilings 625 installation frame for lowea 625.
Lieske Part No.: 1053390

Mounting accessories Universal mounting frame for lowea 600 and 625 for ETM/DALI, excluding B3 and DT8 variants. Ceiling mounting frame 600/625 Universal mounting frame for lowea 600 and 625 for ETM/DALI, excluding B3 and DT8 variants.
Lieske Part No.: 1053391

Mounting accessories installation frame for lowea 600. Installation frame for cut-out ceilings 600 installation frame for lowea 600.
Lieske Part No.: 1893726

Installation accessories installation spring set for panella 625 with cut-out ceilings. Installation set, for cut-out ceilings with the panella 625.
Lieske Part No.: 1342700

Mounting accessories Universal mounting frame for panella 600 and 625. Ceiling mounting frame 600 and 625. Universal mounting frame for panella, agila 600 and 625.
Lieske Part No.: 1347880

Installation accessories installation spring set for panella 312 with cut-out ceilings. Installation set for cut-out ceilings with the panella 1250.
Lieske Part No.: 1347768

Mounting accessories mounting frame for panella 300. Ceiling mounting frame 300 mounting frame for panella 300.
Lieske Part No.: 1347767

Structural accessories 0° for procube CUA.-1/-2 LED. Connector shells, straight arrangement
Lieske Part No.: 579671

Design accessories for hokal HLHIMP. Front side (2 pieces)
Lieske Part No.: 2131267

Design accessories for hokal HLEG-1/HLEX-1 LED. Front side (L:35mm)
Lieske Part No.: 1990002

Installation accessories installation spring set for Agila 600/625 with cut-out ceilings. Installation set for cut-out ceilings on Agila 600/625.
Lieske Part No.: 1867563

Mounting accessories canopy rectangular L = 160mm, ceiling cylinder metal, 2 ropes D = 1.2mm L = 1900mm, 2 cross ropes L = 80mm, white connecting cable, for alevo AVAWF. Canopy vw rectangular L = 160mm, ceiling cylinder metal, 2 ropes D = 1.2mm L = 1900mm, 2 cross ropes L = 80mm, 2 suspension plates, white connecting cable, strain relief Y-rope pendulum with electrical connection, for alevo AVAWF vw.
Lieske Part No.: 1981509

Mounting accessories: canopy rectangular L=160mm, ceiling cylinder metal, 2 cables D=1.2mm L=1900mm, 2 cross cables L=80mm, connecting cable transparent, for alevo AVAWF. Canopy sg rectangular L=160mm, ceiling cylinder metal, 2 cables D=1.2mm L=1900mm, 2 cross cables L=80mm, 2 suspension plates, connecting cable transparent, strain relief Y-cable pendulum with electrical connection, for alevo AVAWF sg.
Lieske Part No.: 1981510

Structural accessories for alevo-AVAWF vw. mechanical light strip connector for alevo wallwasher pendant mounting
Lieske Part No.: 2037163

Mounting accessories universal mounting aid for alevo-AVAMP surface mounts, for multiple use and time-saving marking of the mounting holes. Mounting aid for the mounting holes.
Lieske Part No.: 2116185

Structural accessories LB connector with cable feedthrough and through-wiring for ballea. Connector with cable feedthrough and through-wiring, straight arrangement for ballea-BAM.
Lieske Part No.: 1980656

Mounting accessories Angle hanger for attaching the SDT support rail to a chain. In combination with ball-tested lights ballea, sportler, SDT-Match and THLA, horizontal, inclined (following the roof slope) and rotated pendulum mounting (rotated towards the playing field) is possible. Mounting distance up to 2.5 m. The exact mounting and fastening options can be found in the corresponding mounting instructions for the sports facility light. Accessories for SDT/SDT-Match system. Angle hanger for attaching the SDT support rail to a chain. In combination with ball-tested lights ballea, sportler, SDT-Match and THLA, horizontal, inclined (following the roof slope) and rotated pendulum mounting (rotated towards the playing field) is possible. Mounting distance up to 2.5 m. The exact mounting and fastening options can be found in the corresponding mounting instructions for the sports facility light. Accessories for SDT.
Lieske Part No.: 1326480

Renovation solution greenKit-Type1 for Cubus and Lura T5, module length/1500, simple, quick installation with magnetic closure, housing made of painted sheet steel. Perfectly suited as a replacement for a conventional T5 lamp. Direct light distribution, in combination with the grid and the linear lens made of satin PMMA, the glare control is maintained. The uniform light source ensures homogeneous illumination, the glare limitation of the existing luminaire is maintained.
Lieske Part No.: 2094435

Renovation solution greenKit-Type1 for Cubus and Lura T5, module length/1500, simple, quick installation with magnetic closure, housing made of painted sheet steel. Perfectly suited as a replacement for a conventional T5 lamp. Direct light distribution, in combination with the grid and the linear lens made of satin PMMA, the glare control is maintained. The uniform light source ensures homogeneous illumination, the glare limitation of the existing luminaire is maintained.
Lieske Part No.: 2094436

Mounting accessories for PRE. LED, for concealed symmetrical or cut-out ceilings. Universal fastening mechanism, required for concealed symmetrical rail constructions or cut-out ceilings. For clamping range from 15 to max. 40 mm.
Lieske Part No.: 872597

Mounting accessories for hokal HLE -1, for cut-out ceilings. Universal mounting brackets (2 pieces), required for cut-out ceilings.
Lieske Part No.: 654551

Mounting accessories for hokal HLE -2, for cut-out ceilings. Universal mounting brackets (2 pieces), required for cut-out ceilings.
Lieske Part No.: 338139

Mounting accessories for THLE/1500-2, 1500-3. 6 mounting brackets, required for concealed symmetrical rail constructions or cut-out ceilings.
Lieske Part No.: 493076

Mounting accessories: rectangular canopy L=160mm, metal ceiling cylinder, 2 cables D=1.2mm L=1900mm, 2 cross cables L=120mm, transparent connecting cable, for hokal, procube, cubus. Rectangular canopy L=160mm, metal ceiling cylinder, 2 cables D=1.2mm L=1900mm, 2 cross cables L=120mm, transparent connecting cable Y-cable pendulum with electrical connection, for hokal, procube, cubus LED.
Lieske Part No.: 1778798

Mounting accessories: rectangular canopy L=160mm, metal ceiling cylinder, 2 cables D=1.2mm L=1900mm, 2 cross cables L=120mm, transparent connecting cable, for hokal, procube, cubus. Rectangular canopy L=160mm, metal ceiling cylinder, 2 cables D=1.2mm L=1900mm, 2 cross cables L=120mm, transparent connecting cable Y-cable pendulum with electrical connection, for hokal, procube, cubus LED.
Lieske Part No.: 1778840