Installation Material from Phoenix Contact

Cover profile, for covering terminal strips, snaps onto cover profile carrier AP 3-TU, AP 3-TNS 35, can be marked with insert strip AP-ES. Cover profile carriers should be placed at the ends and at intervals of approx. 40 cm. Length: 1 m
Lieske Part No.: 909646

Cover profile carrier for mounting on NS 32 or NS 35/7.5 DIN rail for attaching the cover profile AP 3.2 mm thick
Lieske Part No.: 294965

Sealable cover profile, for mounting on NS 35/7.5 DIN rail, for fixing the cover profile AP 3, with plastic knurled nut M5, space requirement: 13 mm
Lieske Part No.: 930831

Hinged cover profile, permits hinged covering of terminal strips when used with cover holder APK-TU and holding profile APK-HP; snaps into the holding profile APK-HP, dimensions: 95 x 50 mm
Sales unit: 10 pieces
Lieske Part No.: 334249

Cover profile holder, 10 mm wide, for mounting on NS 32 or NS 35/7.5, for fixing the holding profile APK-HP, labeling with Zack strip ZB 10
Sales unit: 10 pieces
Lieske Part No.: 208901

Holding profile, snaps into the cover holder APK-TU, with groove for Zack strip ZB 5 to ZB 10, length: 2 m
Sales unit: 2 meters
Lieske Part No.: 914883

Isolating connector, can be used in UK...-TG, UKK...-TG, UDK...-TG, MBK...-TG, DIK...-TG, DOK...-TG, and ZFK...-TG disconnect terminal blocks, color: gray
Sales unit: 50 pieces
Lieske Part No.: 540409

Bridge screw, M3, Length: 30.3 mm, Width: 4.75 mm, Color: blue
Sales unit: 100 pieces
Lieske Part No.: 822756

Bridge screw, M3, Length: 30.3 mm, Width: 4.75 mm, Color: red
Sales unit: 100 pieces
Lieske Part No.: 822811

Bridge, pitch: 6.15 mm, number of poles: 100, length: 613 mm, colour: silver
Sales unit: 100 pieces
Lieske Part No.: 611247

Insert bridge, pitch: 6 mm, number of poles: 10, pin assignment: 1,4,7,10, colour: grey
Sales unit: 10 pieces
Lieske Part No.: 1427198

Contactor marker – zack marker strip, Strip, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into flat marker groove, Lettering field: 20 mm x 8 mm
Sales unit: 50 pieces
Lieske Part No.: 377048

Fabric label sheet, Sheet, yellow, unlabeled, can be labeled with: Plotter, Mounting type: Adhesive, Lettering field: 20 mm x 8 mm
Sales unit: 10 pieces
Lieske Part No.: 807187

Fabric label sheet, Sheet, yellow, unlabeled, can be labeled with: Plotter, Mounting type: Adhesive, Lettering field: 19 x 11 mm
Sales unit: 10 pieces
Lieske Part No.: 906530

Fabric label sheet, Sheet, yellow, unlabeled, can be labeled with: Plotter, Mounting type: Adhesive, Lettering field: 15 x 9 mm
Sales unit: 10 pieces
Lieske Part No.: 154494

Zack tape for protective labels, strips, yellow, unlabeled, can be labelled with: CMS-P1-PLOTTER, mounting type: snap-in, lettering field size: 20 x 8 mm, number of individual labels: 5
Sales unit: 50 pieces
Lieske Part No.: 1773864

Fabric label sheet, Sheet, yellow, unlabeled, can be labeled with: Plotter, Mounting type: Adhesive, Lettering field: 38 x 11 mm
Sales unit: 10 pieces
Lieske Part No.: 937806

Label sheet for matrix printer, Sheet, yellow, unlabeled, can be labeled with: Matrix printer, Mounting type: Adhesive, Lettering field: 20 mm x 8 mm
Lieske Part No.: 199915

End cover, Length: 43 mm, Width: 1.5 mm, Color: gray
Sales unit: 50 pieces
Lieske Part No.: 548251

Label sheet, DIN A4, Sheet, yellow, unlabeled, can be labeled with: Office printing systems, Mounting type: Adhesive, Lettering field: 20 mm x 8 mm
Sales unit: 10 pieces
Lieske Part No.: 495858

Label sheet, DIN A4, Sheet, yellow, unlabeled, can be labeled with: Office printing systems, Mounting type: Adhesive, Lettering field: 18 x 8 mm
Sales unit: 10 pieces
Lieske Part No.: 143199

Label sheet DIN-A4, sheet, white, unlabelled, can be labelled with: PLOTMARK, CMS-P1-PLOTTER, office printing systems, mounting type: adhesive, lettering field size: 20 x 8 mm, number of individual labels: 224
Sales unit: 10 pieces
Lieske Part No.: 1773866

Label sheet, DIN A4, Sheet, white, unlabeled, can be labeled with: Office printing systems, Mounting type: Adhesive, Lettering field: 18 x 6 mm
Sales unit: 10 pieces
Lieske Part No.: 830816

Label sheet, DIN A4, Sheet, white, unlabeled, can be labeled with: Office printing systems, Mounting type: Adhesive, Lettering field: 18 x 8 mm
Sales unit: 10 pieces
Lieske Part No.: 369308

Label sheet DIN-A4, sheet, white, unlabelled, can be labelled with: PLOTMARK, CMS-P1-PLOTTER, office printing systems, mounting type: adhesive, lettering field size: 12 x 12 mm, number of individual labels: 273
Sales unit: 10 pieces
Lieske Part No.: 1262515

Label sheet, DIN A4, Sheet, white, unlabeled, can be labeled with: Office printing systems, Mounting type: Adhesive, Lettering field: 25 x 12 mm
Sales unit: 10 pieces
Lieske Part No.: 586167

Etikettenbogen DIN-A4, Bogen, weiß (RAL 9010), unbeschriftet, beschriftbar mit: PLOTMARK, CMS-P1-PLOTTER, Office-Drucksysteme, Montageart: kleben, Anzahl der Einzelschilder: 63, Textfeldhöhe: 12 mm, Textfeldbreite: 50 mm
Sales unit: 10 pieces
Lieske Part No.: 695716

Label sheet, DIN A4, Sheet, white, unlabeled, can be labeled with: Office printing systems, Mounting type: Adhesive, Lettering field: 64 x 34 mm
Sales unit: 10 pieces
Lieske Part No.: 816942

Insert strip, Sheet, transparent/white, unlabeled, can be labeled with: Office printing systems, Plotter, Mounting type: Insert, Lettering field: 92 x 26 mm
Sales unit: 10 pieces
Lieske Part No.: 297649

Label sheet, DIN A4, Sheet, yellow, unlabeled, can be labeled with: Office printing systems, Mounting type: Adhesive, Lettering field: 15 x 9 mm
Sales unit: 10 pieces
Lieske Part No.: 935255

Protective conductor terminal block, number of connections: 4, connection type: screw connection, 1st and 2nd level, cross section: 0.2 mm² - 4 mm², mounting type: NS 35/7.5, NS 35/15, colour: green-yellow
Sales unit: 50 pieces
Lieske Part No.: 1426855

Cover profile, Length: 1000 mm, Color: transparent
Sales unit: 10 pieces
Lieske Part No.: 796203

Plastic mounting bracket, with NS 35/7.5 DIN rail, to snap onto modular terminal blocks with a universal foot, profile length: 35 mm
Sales unit: 10 pieces
Lieske Part No.: 233023

Connecting spring
Sales unit: 10000 pieces
Lieske Part No.: 1234084

Anschlussfeder, Polzahl: 1
Sales unit: 1000 pieces
Lieske Part No.: 492528

Thermospannungsklemmenpaar, TC Typ N, Nennspannung: 400 V, Nennstrom: 1 A, Anzahl der Anschlüsse: 4, Polzahl: 2, Anschlussart: Schraubanschluss, 1. Etage, Querschnitt: 0,2 mm² - 4 mm², Montageart: NS 35/7,5, NS 35/15, NS 32, Farbe: grau
Sales unit: 50 pieces
Lieske Part No.: 490551

Marking nail Zack tape, strips, white, unlabeled, can be labelled with: CMS-P1-PLOTTER, mounting type: plug, for terminal width: 5.2 mm, lettering field size: 4 x 4 mm, number of individual labels: 1000
Sales unit: 100 pieces
Lieske Part No.: 1262012

Zack marker strip, Strip, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into tall marker groove, for terminal block width: 10.2 mm, Lettering field: 10.15 x 10.5 mm
Sales unit: 100 pieces
Lieske Part No.: 396412

Zack marker strip, Strip, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into tall marker groove, for terminal block width: 8.2 mm, Lettering field: 10.5 x 8.15 mm
Sales unit: 100 pieces
Lieske Part No.: 101095

Zack marker strip, Strip, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into tall marker groove, for terminal block width: 5.2 mm, Lettering field: 5.15 x 10.5 mm
Sales unit: 100 pieces
Lieske Part No.: 850342

Zack marker strip, Strip, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm
Sales unit: 100 pieces
Lieske Part No.: 789775

Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into tall marker groove, for terminal block width: 6.2 mm, Lettering field: 7.5 x 5.6 mm
Sales unit: 50 pieces
Lieske Part No.: 849799

Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into tall marker groove, for terminal block width: 5.2 mm, Lettering field: 7.5 x 4.6 mm
Sales unit: 50 pieces
Lieske Part No.: 921952

Fully hard metal chisel, 1 cutting edge, cutting width: 0.3 mm
Sales unit: 10 pieces
Lieske Part No.: 167812

Fixing rings, for presetting the processing tools
Sales unit: 50 pieces
Lieske Part No.: 644393

Fully hard metal chisel, 1 cutting edge, cutting width: 0.1 mm
Sales unit: 10 pieces
Lieske Part No.: 687428

Replacement collet chuck, for processing tools with a 3 mm shaft diameter
Lieske Part No.: 907659

Ink ribbon, not for PSS shrink sleeves, length: 91 m, width: 110 mm, printing color: black
Lieske Part No.: 789381

Marker pen, incl. adapter, ink tank and reservoir, 0.25 mm nib
Lieske Part No.: 185305

Marker pen, incl. adapter, ink tank and reservoir, 0.35 mm nib
Lieske Part No.: 432564