Installation Material from Phoenix Contact

Verkaufseinheit: 1 ST.
Lieske Part No.: 1592694

Verkaufseinheit: 1 ST.
Lieske Part No.: 1780063

Verkaufseinheit: 1 ST.
Lieske Part No.: 1780065

G-profile DIN rail, material: Steel, perforated, height 15 mm, width 32 mm, length 2 m
Sales unit: 5 pieces
Lieske Part No.: 951829

End clamp, width: 8 mm
Sales unit: 100 pieces
Lieske Part No.: 653273

Flat bracket, with M6 screw, for fixing DIN rails 12 mm above the mounting surface
Sales unit: 10 pieces
Lieske Part No.: 155799

Angled brackets with M 6 screw, for fixing DIN rails at an angle of 30°, height: 35.4 mm
Lieske Part No.: 969759

Angled brackets with M6 screw, for fixing DIN rails at an angle of 30°, height: 46 mm
Lieske Part No.: 187711

Flat bracket, for fixing DIN rails 15 mm above the mounting surface, the fixing hole has a diameter of 6.5 mm
Lieske Part No.: 595561

Support bracket, for insulated mounting of DIN rails in insulated systems, plastic, 21 mm high
Sales unit: 10 pieces
Lieske Part No.: 844453

End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, color: gray
Lieske Part No.: 711109

End clamp, Width: 9.5 mm, Height: 35.3 mm, Length: 50.5 mm, Color: gray
Lieske Part No.: 252257

End clamp, width: 8.5 mm, color: gray
Sales unit: 100 pieces
Lieske Part No.: 871488

Double hinged carrier, for mounting two NS 35/7.5 DIN rails above each other. If the top DIN rail is used as a grounding busbar, an additional PE conductor connection must be established to the lower rail. They are delivered in pairs
Lieske Part No.: 213179

Angled brackets with M6 screw, DIN rail limit stop, for fixing DIN rails at an angle of 30°, height: 46 mm
Sales unit: 10 pieces
Lieske Part No.: 163537

End clamp, for end support of UKH 50 - UKH 240, is pushed onto DIN rail NS 32 and fixed with 2 screws, width: 10 mm, color: Aluminum
Sales unit: 10 pieces
Lieske Part No.: 651535

End clamp, for end support of UKH 50 to UKH 240, is pushed onto DIN rail NS 35 and fixed with 2 screws, width: 10 mm, color: aluminum
Lieske Part No.: 705167

Verkaufseinheit: 10 ST.
Sales unit: 10 pieces
Lieske Part No.: 1233837

DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 15 mm, width 35 mm, length: 2000 mm
Sales unit: 5 pieces
Lieske Part No.: 189642

End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, color: gray
Sales unit: 50 pieces
Lieske Part No.: 857338

Rail adapters, for M5 screws, Length: 42.6 mm, Width: 10 mm, Height: 19 mm, Color: gray
Sales unit: 25 pieces
Lieske Part No.: 225049

DIN rail, material: Galvanized, perforated, height 7.5 mm, width 35 mm, length: 2 m
Sales unit: 25 pieces
Lieske Part No.: 671210

DIN rail, material: Galvanized, unperforated, height 7.5 mm, width 35 mm, length: 2 m
Sales unit: 5 pieces
Lieske Part No.: 304487

DIN rail end piece, for DIN rail NS 35/7.5
Sales unit: 100 pieces
Lieske Part No.: 251354

DIN rail, material: Galvanized, perforated, height 15 mm, width 35 mm, length: 2 m
Sales unit: 25 pieces
Lieske Part No.: 334229

Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 1.0 x 5.5 x 150 mm, 2-component grip, with non-slip grip
Lieske Part No.: 357569

Replacement charger, for SF‑ASD 21 cordless screwdriver, 230 V
Lieske Part No.: 958249

Adapter bit for TSD-M...torque tools, E6.3-1/10,2 cm ( 4 inch ) drive with 4 mm hexagon to accommodate SAC bits
Lieske Part No.: 330039

Cable binder pliers, for plastic cable binders with a width of 2.2 - 4.8 mm, for a material thickness of up to 1.6 mm
Lieske Part No.: 158128

Separating plate, Length: 22 mm, Width: 0.5 mm, Height: 22 mm, Color: gray
Lieske Part No.: 131255

Bridge bar isolator, Color: gray
Sales unit: 100 pieces
Lieske Part No.: 507607

BNB Zack marker strip, 10-section, divisible, horizontally labeled with the consecutive numbers: 1 ... 10, white
Sales unit: 10 pieces
Lieske Part No.: 617903

Marker pin Zack strip, Strip, white, unlabeled, can be labeled with: Plotter, Mounting type: Plug in, for terminal block width: 5 mm, Lettering field: 4 x 4 mm
Sales unit: 10 pieces
Lieske Part No.: 816946

BNB Zack marker strip, 10-section, divisible, horizontally labeled with the consecutive numbers: 1 ... 10, white
Sales unit: 10 pieces
Lieske Part No.: 415736

BNB Zack marker strip, 10-section, divisible, horizontally labeled with the consecutive numbers: 11 ... 20, white
Sales unit: 10 pieces
Lieske Part No.: 622218

BNB Zack marker strip, 10-section, divisible, horizontally labeled with the consecutive numbers: 21 ... 30, white
Sales unit: 10 pieces
Lieske Part No.: 765728

Closing cap, for closing unused bore holes in multiple seals and cable glands, diameter 6 mm
Sales unit: 10 pieces
Lieske Part No.: 144525

Closing cap, for closing unused bore holes in multiple seals and cable glands, diameter 8 mm
Sales unit: 10 pieces
Lieske Part No.: 144526

Mini feed-through terminal block, Connection method: Screw connection, Cross section: 0.2 mm² - 2.5 mm², AWG: 24 - 14, Width: 5 mm, Color: gray, Mounting type: NS 15
Lieske Part No.: 941655

Mini feed-through terminal block, Connection method: Screw connection, Cross section: 0.2 mm² - 2.5 mm², AWG: 24 - 14, Width: 5 mm, Color: blue, Mounting type: NS 15
Sales unit: 200 pieces
Lieske Part No.: 895823

Insertion bridge, Pitch: 5.2 mm, Number of positions: 10, Color: gray
Sales unit: 10 pieces
Lieske Part No.: 573342

Insertion bridge, Pitch: 5 mm, Number of positions: 3, Color: gray
Sales unit: 100 pieces
Lieske Part No.: 571330

Insertion bridge, Pitch: 5 mm, Number of positions: 2, Color: gray
Sales unit: 100 pieces
Lieske Part No.: 750407

Marker for terminal blocks, Stud, white, unlabeled, can be labeled with: Marker pen, Mounting type: Plug in, for terminal block width: 4.2 mm, Lettering field: 4 x 4 mm
Sales unit: 100 pieces
Lieske Part No.: 569326

End clamp, width: 6.2 mm, color: gray
Lieske Part No.: 778768

DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 5.5 mm, width 15 mm, length: 2000 mm
Lieske Part No.: 757247

DIN rail, material: Aluminum, perforated, height 5.5 mm, width 15 mm, length: 2 m
Sales unit: 5 pieces
Lieske Part No.: 639645

BNB Zack marker strip, 10-section, divisible, horizontally labeled with the consecutive numbers: 1 ... 10, white
Sales unit: 10 pieces
Lieske Part No.: 545111

BNB Zack marker strip, 10-section, divisible, horizontally labeled with the consecutive numbers: 11 ... 20, white
Sales unit: 10 pieces
Lieske Part No.: 536557

BNB Zack marker strip, 10-section, divisible, horizontally labeled with the consecutive numbers: 21 ... 30, white
Sales unit: 10 pieces
Lieske Part No.: 214981