Moxa ioLogik E2260 ,Ethernet I/O with Ethernet, 6RTD,4DO

The Moxa ioLogik E2200 Series is a smart Ethernet I/O platform featuring Click&Go™ logic, supporting up to 24 event-based rules for autonomous control and alarm notification—without the need for a PC. Unlike traditional PLCs that use polling, this series supports push-based communication to SCADA systems via MX-AOPC UA Server, sending updates only when events or state changes occur.

It also supports SNMPv1/v2c/v3, enabling IT professionals to monitor and control I/O through traps or direct access to registers. Configuration is simplified through a web interface or ioAdmin utility. With support for Modbus TCP and Modbus RTU over RS-485, along with secure SNMPv3 communication and active I/O push updates, the E2200 Series is ideal for use in energy, environmental monitoring, and transportation industries.

Technical Specifications:

General:

• Click&Go Logic: up to 24 rules
• RTC: Real-time clock with battery backup
• Protocols: Modbus TCP (Server), SNMPv1/v2c/v3, MXIO, MX-AOPC UA, CGI, Modbus RTU Master (RS-485)
• Configuration: Web console, ioAdmin (Windows), DHCP, HTTP, BOOTP
• Security: SNMPv3 with authentication and HMAC encryption

I/O Channels (model-dependent):

• Digital Inputs: 6–12 channels (up to 900 Hz)
• Digital Outputs: 4–8 channels (200 mA, pulse output up to 1 kHz)
• DIO (configurable): 4–12 channels
• Relay Outputs: 6 channels (up to 5 A @ 250 VAC)
• Analog Inputs: 4–8 channels, 16-bit, ±150 mV to ±10 V, 0/4–20 mA
• Analog Outputs: 2 channels, 12-bit, 0–10 V, 4–20 mA
• RTDs: 6 channels (e.g., PT100, PT1000, NI100)
• Thermocouples: 8 channels (types J/K/T/E/R/S/B/N)

Interfaces:

• Ethernet: 1x 10/100BaseT(X), RJ45, 1.5 kV isolation
• RS-485 (terminal block, 2-wire)
• LED Indicators: PWR, RDY, Serial, I/O status

Power:

• Input Voltage: 12–36 VDC
• Power Consumption: 95–202 mA @ 24 VDC (model-dependent)
• Connector: Screw-fastened Euroblock terminal

Mechanical and Environmental:

• Housing: Plastic
• Dimensions: 115 × 79 × 45.6 mm
• Weight: 250 g
• Mounting: DIN rail or wall
• Operating Temperature: -10 to 60 °C (standard), -40 to 75 °C (T models)
• Storage Temperature: -40 to 85 °C
• Humidity: 5–95% (non-condensing)
• MTBF: up to 341,063 hours
• Certifications: UL 508, EN 61000-6-2/-6-4, RoHS, WEEE

Package Contents:

• 1x ioLogik E2200 Series remote I/O
• 1x Quick installation guide
• 1x Warranty card

Warranty:

• 5 years (except model E2214: 2 years)