Moxa ioLogik E1512-M12-T - operating temperature 40 to 85 °C
|
1.058,00 EUR |
|||||||||||
|
( 1.259,02 EUR incl. VAT ) ≈ £882.37 | ≈ $1,181.79 plus delivery charges: 55,00 € |
|||||||||||
| On order · Delivery time approx. 20 workdaysinfo_outline | |||||||||||
| Lieske Part No.: | 588516 | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfg Part No: | ioLogik E1512-M12-T | ||||||||||
| Weight: | 0.5 kg | ||||||||||
|
Graduated prices net
|
|||||||||||
Further Data Acquisition and Control from MoxaFurther products in category Data Acquisition and Control
All products of Moxa
Product information for Moxa ioLogik E1512-M12-T:
The Moxa ioLogik E1512-M12-T is a robust Ethernet remote I/O module, specifically designed for use in rail and rail vehicle applications. It is intended for decentralized data acquisition and control in industrial environments with high requirements for reliability and environmental resistance. The device complies with standards EN 50121-3-2, EN 50121-4, and parts of EN 50155, ensuring high electromagnetic compatibility and stable operation under extreme conditions. The design takes into account the specific requirements of rail transport, including high vibrations and varying ambient temperatures.
Applications
The ioLogik E1512-M12-T is intended for use in trains and other rail vehicles, where reliable and low-maintenance control of peripheral devices is required. It is suitable for applications such as monitoring door statuses, lighting, air conditioning systems, or signaling systems. The ability to flexibly configure digital inputs and outputs allows adaptation to different system requirements without hardware modifications. Compliance with rail standards makes it suitable for use in railway infrastructure.
Functions and Equipment in Detail
The module features four digital I/Os, which can be configured via software as digital inputs (DI) or digital outputs (DO). The inputs support both Dry Contact (short to GND for ON, open for OFF) and Wet Contact (10–30 VDC for ON, 0–3 VDC for OFF). The outputs operate in Open Collector (Sink) mode with a current rating of 200 mA per channel. The outputs can also be operated as pulse outputs, with a maximum frequency of 500 Hz. The inputs can be used as event counters, with a counting frequency of up to 250 Hz. Channel-to-channel isolation is 3 kVDC or 2 kVrms, providing high electrical safety.
Technology Explained Simply
The network interface consists of a 10/100BaseT(X) Ethernet port with M12 connector, D-coded, 4-pin (female). The integrated isolation is 1.5 kV, enhancing safety against electrical disturbances. The module supports protocols Modbus TCP (as slave), MXIO Library, and MX-AOPC (Active Tag), enabling integration into existing SCADA systems. Configuration is performed via a web browser (HTTP) or the ioSearch software under Windows. Management is done via BOOTP, DHCP client, HTTP, TCP/IP, and UDP. The operating temperature ranges from -40 to 85 °C, enabling use in extreme climatic conditions. Humidity is 5 to 95 % (non-condensing), and the maximum operating altitude is 2000 m. The housing is made of aluminium, providing high mechanical stability and heat dissipation.
Compatibility and Accessories
The module is designed for use in rail and rail vehicle applications and complies with relevant standards for this sector. It is compatible with protocols Modbus TCP, MXIO, and MX-AOPC UA, which are widely used in industrial automation systems. The integrated network interface enables direct connection to Ethernet-based control systems. Mounting is done via DIN rail or optionally via wall mounting. Wiring is done with cables in the 16–26 AWG range.
Mounting and Installation
The device can be easily mounted on a DIN rail, enabling standardized installation in enclosures. Optional wall mounting is also available. Wiring is done via the included terminal blocks: one 16-pin and one 3-pin, both with a pitch of 3.81 mm.
Operational Advantages
The ioLogik E1512-M12-T offers high operational reliability through compliance with rail standards and integrated isolation. The flexible configuration of I/Os allows adaptation to various applications. Support for Modbus TCP and MX-AOPC UA simplifies integration into existing systems. The high operating temperature range of -40 to 85 °C and resistance to vibrations make it particularly suitable for use in trains. The MTBF is 554,122 hours (according to Telcordia SR332), indicating high reliability over a long period. The warranty is 5 years.
Scope of Delivery
The device is delivered with a 16-pin terminal block, a 3-pin terminal block, a quick start guide, and a warranty card. Mounting is done via DIN rail or optionally via wall mounting. Wiring is done with cables in the 16–26 AWG range. The quick start guide supports installation and configuration of the module.
Certifications
The module complies with rail standards EN 50121-3-2, EN 50121-4, and parts of EN 50155. It is also certified for safety according to UL 508. EMC certifications include EN 61000-6-2/-6-4, CISPR 32, and FCC Part 15B. Shock and vibration resistance comply with standards IEC 60068-2-27 and IEC 60068-2-6.
Protection Rating and Environmental Conditions
The device is designed for use in rail and rail vehicle applications, with operating temperature from -40 to 85 °C and humidity from 5 to 95 % (non-condensing) defining the operating conditions. The maximum operating altitude is 2000 m. The aluminium housing provides mechanical stability and heat dissipation. The integrated isolation of the network interface is 1.5 kV, and channel-to-channel isolation is 3 kVDC or 2 kVrms.
Warranty
The warranty is 5 years, underscoring the high quality and reliability of the product. The warranty card is included in the scope of delivery.
MTBF
The MTBF (Mean Time Between Failures) is 554,122 hours, measured according to Telcordia SR332, indicating high operational reliability.
Manufacturer and Model
Manufacturer is Moxa, model designation ioLogik E1512-M12-T. The device has been specifically developed for use in rail and rail vehicle applications and complies with the required standards for this sector.
Certifications
The module complies with rail standards EN 50121-3-2, EN 50121-4, and parts of EN 50155. It is also certified for safety according to UL 508. EMC certifications include EN 61000-6-2/-6-4, CISPR 32, and FCC Part 15B. Shock and vibration resistance comply with standards IEC 60068-2-27 and IEC 60068-2-6.
Protection Rating and Environmental Conditions
The device is designed for use in rail and rail vehicle applications, with operating temperature from -40 to 85 °C and humidity from 5 to 95 % (non-condensing) defining the operating conditions. The maximum operating altitude is 2000 m. The aluminium housing provides mechanical stability and heat dissipation. The integrated isolation of the network interface is 1.5 kV, and channel-to-channel isolation is 3 kVDC or 2 kVrms.
Warranty
The warranty is 5 years, underscoring the high quality and reliability of the product. The warranty card is included in the scope of delivery.
MTBF
The MTBF (Mean Time Between Failures) is 554,122 hours, measured according to Telcordia SR332, indicating high operational reliability.
Manufacturer and Model
Manufacturer is Moxa, model designation ioLogik E1512-M12-T. The device has been specifically developed for use in rail and rail vehicle applications and complies with the required standards for this sector.
Applications
The ioLogik E1512-M12-T is intended for use in trains and other rail vehicles, where reliable and low-maintenance control of peripheral devices is required. It is suitable for applications such as monitoring door statuses, lighting, air conditioning systems, or signaling systems. The ability to flexibly configure digital inputs and outputs allows adaptation to different system requirements without hardware modifications. Compliance with rail standards makes it suitable for use in railway infrastructure.
Functions and Equipment in Detail
The module features four digital I/Os, which can be configured via software as digital inputs (DI) or digital outputs (DO). The inputs support both Dry Contact (short to GND for ON, open for OFF) and Wet Contact (10–30 VDC for ON, 0–3 VDC for OFF). The outputs operate in Open Collector (Sink) mode with a current rating of 200 mA per channel. The outputs can also be operated as pulse outputs, with a maximum frequency of 500 Hz. The inputs can be used as event counters, with a counting frequency of up to 250 Hz. Channel-to-channel isolation is 3 kVDC or 2 kVrms, providing high electrical safety.
Technology Explained Simply
The network interface consists of a 10/100BaseT(X) Ethernet port with M12 connector, D-coded, 4-pin (female). The integrated isolation is 1.5 kV, enhancing safety against electrical disturbances. The module supports protocols Modbus TCP (as slave), MXIO Library, and MX-AOPC (Active Tag), enabling integration into existing SCADA systems. Configuration is performed via a web browser (HTTP) or the ioSearch software under Windows. Management is done via BOOTP, DHCP client, HTTP, TCP/IP, and UDP. The operating temperature ranges from -40 to 85 °C, enabling use in extreme climatic conditions. Humidity is 5 to 95 % (non-condensing), and the maximum operating altitude is 2000 m. The housing is made of aluminium, providing high mechanical stability and heat dissipation.
Compatibility and Accessories
The module is designed for use in rail and rail vehicle applications and complies with relevant standards for this sector. It is compatible with protocols Modbus TCP, MXIO, and MX-AOPC UA, which are widely used in industrial automation systems. The integrated network interface enables direct connection to Ethernet-based control systems. Mounting is done via DIN rail or optionally via wall mounting. Wiring is done with cables in the 16–26 AWG range.
Mounting and Installation
The device can be easily mounted on a DIN rail, enabling standardized installation in enclosures. Optional wall mounting is also available. Wiring is done via the included terminal blocks: one 16-pin and one 3-pin, both with a pitch of 3.81 mm.
Operational Advantages
The ioLogik E1512-M12-T offers high operational reliability through compliance with rail standards and integrated isolation. The flexible configuration of I/Os allows adaptation to various applications. Support for Modbus TCP and MX-AOPC UA simplifies integration into existing systems. The high operating temperature range of -40 to 85 °C and resistance to vibrations make it particularly suitable for use in trains. The MTBF is 554,122 hours (according to Telcordia SR332), indicating high reliability over a long period. The warranty is 5 years.
Scope of Delivery
The device is delivered with a 16-pin terminal block, a 3-pin terminal block, a quick start guide, and a warranty card. Mounting is done via DIN rail or optionally via wall mounting. Wiring is done with cables in the 16–26 AWG range. The quick start guide supports installation and configuration of the module.
Certifications
The module complies with rail standards EN 50121-3-2, EN 50121-4, and parts of EN 50155. It is also certified for safety according to UL 508. EMC certifications include EN 61000-6-2/-6-4, CISPR 32, and FCC Part 15B. Shock and vibration resistance comply with standards IEC 60068-2-27 and IEC 60068-2-6.
Protection Rating and Environmental Conditions
The device is designed for use in rail and rail vehicle applications, with operating temperature from -40 to 85 °C and humidity from 5 to 95 % (non-condensing) defining the operating conditions. The maximum operating altitude is 2000 m. The aluminium housing provides mechanical stability and heat dissipation. The integrated isolation of the network interface is 1.5 kV, and channel-to-channel isolation is 3 kVDC or 2 kVrms.
Warranty
The warranty is 5 years, underscoring the high quality and reliability of the product. The warranty card is included in the scope of delivery.
MTBF
The MTBF (Mean Time Between Failures) is 554,122 hours, measured according to Telcordia SR332, indicating high operational reliability.
Manufacturer and Model
Manufacturer is Moxa, model designation ioLogik E1512-M12-T. The device has been specifically developed for use in rail and rail vehicle applications and complies with the required standards for this sector.
Certifications
The module complies with rail standards EN 50121-3-2, EN 50121-4, and parts of EN 50155. It is also certified for safety according to UL 508. EMC certifications include EN 61000-6-2/-6-4, CISPR 32, and FCC Part 15B. Shock and vibration resistance comply with standards IEC 60068-2-27 and IEC 60068-2-6.
Protection Rating and Environmental Conditions
The device is designed for use in rail and rail vehicle applications, with operating temperature from -40 to 85 °C and humidity from 5 to 95 % (non-condensing) defining the operating conditions. The maximum operating altitude is 2000 m. The aluminium housing provides mechanical stability and heat dissipation. The integrated isolation of the network interface is 1.5 kV, and channel-to-channel isolation is 3 kVDC or 2 kVrms.
Warranty
The warranty is 5 years, underscoring the high quality and reliability of the product. The warranty card is included in the scope of delivery.
MTBF
The MTBF (Mean Time Between Failures) is 554,122 hours, measured according to Telcordia SR332, indicating high operational reliability.
Manufacturer and Model
Manufacturer is Moxa, model designation ioLogik E1512-M12-T. The device has been specifically developed for use in rail and rail vehicle applications and complies with the required standards for this sector.
| General | |
| Overcurrent protection | 0,65 A @ 25 °C |
| Counting frequency (DI) | 250 Hz |
| Network interface isolation | 1,5 kV |
| MTBF | 554.122 Stunden (Telcordia SR332) |
Questions & answers
What is the delivery time of Moxa ioLogik E1512-M12-T - operating temperature 40 to 85 °C?
The article Moxa ioLogik E1512-M12-T - operating temperature 40 to 85 °C is currently not in stock but has been backordered.
According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Moxa ioLogik E1512-M12-T to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Moxa ioLogik E1512-M12-T - operating temperature 40 to 85 °C always at the best possible price. We can give you a discount of 2% on Moxa ioLogik E1512-M12-T - operating temperature 40 to 85 °C if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 2 pieces of Moxa ioLogik E1512-M12-T - operating temperature 40 to 85 °C we can offer you a price of 1.026,26 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.