Moxa A-CRF-RMNM-LI-300 , LMR-195 LITE cable content_copy

The A-CRF-RMNM-LI-300 from Moxa is an RF cable with a length of 3 metres, made with LMR-195 Lite cable. It connects an N-type plug (male) to an RP-SMA plug (male) and is designed for applications requiring a reliable high-frequency connection over short distances in a compact form factor. Typical use cases include WLAN infrastructures, IoT systems, and antenna systems where stable signal transmission in the frequency range of wireless communication is essential.

Applications
This cable is specifically designed for use in wireless communication systems, particularly in environments with limited space. Its compact design and small outer diameter of 4.95 mm allow for flexible installation even in tight spaces, such as enclosures, on devices, or in installations with restricted mounting space. The 3-metre length provides a balanced reach suitable for many industrial and technical applications.

Features and Equipment in Detail
The cable features an N-type plug (male) at one end and an RP-SMA plug (male) at the other, enabling direct connection between devices with different connector types. The N-type plug is robust and designed for high frequencies, while the RP-SMA plug is commonly used in WLAN and IoT devices. This connection is therefore suitable for linking, for example, a router or access point to an external antenna.

Technology Explained Simply
The cable is made from LMR-195 Lite, a coaxial cable type known for its low attenuation and high flexibility. Attenuation values are 62.4 dB at 2500 MHz and 98.1 dB at 5800 MHz, meaning the signal is only slightly weakened at these frequencies. These values fall within the acceptable range for typical WLAN and IoT applications. The minimum bending radius of 12.7 mm ensures the cable remains undamaged even when bent tightly, preserving its electrical properties.

Compatibility and Accessories
The cable is compatible with devices featuring N-type and RP-SMA connectors. It can be used, for example, to connect WLAN access points to external antennas or in IoT systems where a stable RF connection is required. Its use in systems operating at frequencies between 2.5 GHz and 5.8 GHz is suitable due to the specified attenuation values.

Installation and Mounting
Installation is performed by simply plugging the connectors into the corresponding sockets on the devices. Due to its small outer diameter and minimum bending radius of 12.7 mm, the cable can be easily routed even in tight spaces or complex installations. No additional tools or mounting aids are required.

Operational Advantages
The cable provides reliable signal transmission with low attenuation, resulting in stable performance in wireless networks. Its compact design and flexibility simplify installation, especially in space-constrained environments. The use of LMR-195 Lite cable ensures high mechanical stability and long service life under normal operating conditions. The warranty is 1 year, with further details available on the manufacturer’s website.

General
Cable type	LMR-195 Lite
Connections	N-type (male) to RP-SMA (male)
Cable length	3 m
Outer diameter	4,95 mm
Minimum bending radius	12,7 mm
Damping	62.4 dB @ 2500 MHz, 98.1 dB @ 5800 MHz

---