Moxa A-CRF-RMNM-L1-600 – 6 meters content_copy

The A-CRF-RMNM-L1-600 from Moxa is a 6 metre long RF cable, specifically designed for connecting antennas and radio modules in wireless communication systems. It connects an N-type plug (male) at one end with an RP-SMA plug (male) at the other, making it compatible with a wide range of devices in the WLAN, IoT and other wireless applications. The cable is based on the flexible LMR-195 Lite design, which is designed for low outer diameter and high flexibility, making it particularly suitable for installations in confined spaces or with moving components.

Applications
The cable is used in applications requiring reliable high-frequency transmission over short to medium distances. Typical use cases include connecting WLAN access points with external antennas, IoT systems with wireless communication, or industrial radio installations. The low attenuation at the specified frequencies ensures that signal quality is maintained over the entire cable length, which is important for stable wireless connections.

Features and Equipment in Detail
The cable has an outer diameter of 4.95 mm and a minimum bending radius of 12.7 mm, making it flexible and easy to install. The use of the LMR-195 Lite cable type ensures high mechanical robustness while maintaining low signal loss. The connector consists of an N-type plug (male) and an RP-SMA plug (male), allowing it to interface with standard connectors in industrial and IT environments.

Technology Explained Simply
The attenuation values of 62.4 dB at 2500 MHz and 98.1 dB at 5800 MHz describe how much the signal weakens over the cable length. These values are typical for RF cables of this type and are sufficient for most wireless communication applications. A small bending radius allows for easy installation, even in tight spaces or around curves, without impairing electrical properties.

Compatibility and Accessories
The cable is designed for devices featuring an N-type connector (male) and an RP-SMA connector (male). It can be used in combination with antennas, radio modules, or other RF connections that support these connector types. No additional accessories or components are required to use the cable.

Installation and Mounting
Installation is performed by simply plugging the connectors into the corresponding ports. Due to its small outer diameter and minimal bending radius, the cable is easy to route even in tight installation situations or with moving components. No special tools or aids are required.

Operational Advantages
The combination of small diameter, high flexibility, and reliable RF transmission enables simple and efficient installation. Low attenuation ensures stable signal transmission, supporting the functionality of wireless systems. The cable is suitable for use in industrial and IT environments where a robust and reliable connection is required.

General
Cable type	LMR-195 Lite
Connections	N-type (male) to RP-SMA (male)
Cable length	6 m
Outer diameter	4,95 mm
Minimum bending radius	12,7 mm
Damping	62.4 dB @ 2500 MHz, 98.1 dB @ 5800 MHz

---