Microsens MS100700DX

The Small Form Factor Pluggable (SFP+) is a next-generation interchangeable transceiver module designed for use in modern network components. It is smaller than all other available form factors and provides the highest density per interface. The SFP+ form factor is identical to SFP but offers higher performance, supporting data rates of up to 11.1 GBit/s. Many active network devices with 10G interfaces are already designed for SFP+ transceivers, providing maximum flexibility for network configuration.

Thanks to its hot-swap design, the module can be installed or replaced during operation without interrupting the system. SFP+ modules are optimized for a variety of cable types, including multimode, single-mode, and simplex, and support protocols such as 10 Gigabit Ethernet, 8 Gigabit Fibre Channel, and STM-64.

Standards like the Multi Source Agreement (MSA) and SFF-8472 ensure standardized design and optional Digital Diagnostic Monitoring (DDM), enabling users to monitor critical parameters such as power and connection quality.

Technical Specifications:

Types and Cable Media:

• Supports multimode and single-mode fibers
• LC-duplex connector for reliable connections
• Compatible with 10 Gigabit Ethernet and STM-64
• Digital Diagnostic Monitoring (DDM) for precise monitoring

Technical Details:

• Bandwidth: 8.5 GBit/s to 11.1 GBit/s
• Range:
- Multimode: 220 m to 300 m
- Single-mode: 10 km to 80 km

• Wavelengths:
- Multimode: TX/RX 850 nm or 1310 nm
- Single-mode: TX/RX 1310 nm or 1550 nm

• Operating Temperature Range:
- Standard models: 0°C to +70°C
- Extended models: -40°C to +85°C

• Power Budget: 3.5 dB to 23 dB (depending on the model)
• Protocols: 10 Gigabit Ethernet, STM-64
• Laser Types:
- Multimode: VCSEL or FP
- Single-mode: DFB or EML


Safety Information:

Fiber-optic components emit visible and invisible light that can cause irreversible eye damage. Please observe the following:

• Never look directly into optical ports (risk of blinding).
• Cover unused optical ports with protective caps.
• Activate the connection only after all ports are properly connected.

The active laser components comply with Laser Class 1 standards.

Order Information:

Multimode Models:

• MS100700D: SFP+ 10G Transceiver SR, Multimode 850 nm, DDM, LC, range 300 m, operating temperature 0°C to +70°C
• MS100700DX: With extended temperature (-40°C to +85°C)
• MS100701D: SFP+ 10G Transceiver LRM, Multimode 1310 nm, DDM, LC, range 220 m

Single-Mode Models:

• MS100702D: SFP+ 10G Transceiver LR, Single-mode 1310 nm, DDM, LC, range 10 km
• MS100702DX: With extended temperature (-40°C to +85°C)
• MS100704D: SFP+ 10G Transceiver ER, Single-mode 1550 nm, DDM, LC, range 40 km
• MS100706D: SFP+ 10G Transceiver ZR, Single-mode 1550 nm, DDM, LC, range 80 km

The SFP+ modules offer an ideal solution for demanding networks that require reliability and top performance.