MICROSENS MS100001D SFP GbE Extender FP Transceiver 1.25 Gbit/s Multimode 1310 nm, max. 2 km, DDM, LC
|
-45% 146,30 EUR 266,00 EUR |
|||||||||||
|
( 174,10 EUR incl. VAT ) ≈ £122.45 | ≈ $160.78 plus delivery charges: 55,00 € |
|||||||||||
| Delivery time from supplier's stock (ca.) 20 workdaysinfo_outline | |||||||||||
| Lieske Part No.: | 1504625 | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfg Part No: | MS100001D | ||||||||||
| Weight: | 0.2 kg | ||||||||||
|
Graduated prices net
|
|||||||||||
Product information for MICROSENS MS100001D:
Applications
The transceiver is suitable for applications in the field of Gigabit Ethernet and Gigabit Fiber Channel. It is used in networks that utilise multimode fiber optic cable as the transmission medium, for example in local area networks (LAN) or for connecting switches, routers and servers over longer distances. The maximum range of 2 km makes it particularly suitable for connections between buildings or within large corporate sites. The operating temperature range of 0 °C to +70 °C allows use in controlled indoor environments as well as in environments with moderate temperature increases, such as server rooms.
Functions and Features in Detail
The module features hot-swap capability, meaning it can be exchanged or installed during operation without interrupting network service. This is particularly advantageous for maintenance work and rapid fault resolution. Compatibility with the MSA (Multi Source Agreement) and SFF-8472 standards ensures universal use in various network devices that support SFP modules. The DDM variant (MS100001D) provides a digital diagnostic interface that delivers information about the module's operating status, such as temperature, voltage and optical power. This feature simplifies network monitoring and fault diagnosis.
Technology Explained Simply
The transceiver uses a Fabry-Perot laser operating at a wavelength of 1310 nm. This wavelength is optimised for multimode fiber optic cables and enables efficient data transmission with minimal losses. The power budget is 10 dB, which describes the maximum difference between the transmitter's output power and the receiver's sensitivity threshold. The transmitter's output power ranges from -9 dBm to -1 dBm, while the receiver can handle a minimum input power of -19 dBm and a maximum overload of -1 dBm. The extinction ratio of 9 dB is a measure of signal quality and indicates how well the module can distinguish between logical states (0 and 1).
Compatibility and Accessories
The module is designed for multimode fiber optic cables and requires an LC duplex connection. It is compatible with devices that support SFP modules, such as switches, routers or network adapters. The use of appropriate fiber optic cables is required to ensure maximum range and data integrity. The DDM function enables integration into network management systems that retrieve status information via the digital diagnostic interface.
Installation and Mounting
Installation is performed by simply inserting the module into the corresponding SFP slot of a network device. The hot-swap function allows replacement without network downtime. The optical connection is established via the LC duplex interface, and the use of protective caps for unused connectors is recommended to prevent optical contamination. The connection should only be activated after installation is complete to ensure a secure and stable link.
Operational Advantages
The combination of compact design, high transmission rate and hot-swap capability makes the module a reliable solution for modern networks. The DDM function supports network administration through continuous monitoring of module parameters. The use of multimode fiber optic cable enables cost-effective and efficient connections over medium distances. Compliance with international laser class 1 ensures safe handling without risk to the eyes, provided eye safety guidelines are followed.
| General | |
| Connection | LC Duplex |
| Interface | Multi mode |
| Transmission range | 2 km |
| Bandwidth | 1.0625 to 1.25 GBit/s |
| Working temperature | 0 to 70 °C |
| Protocols | Gigabit Ethernet, Gigabit Fiber Channel |
| Wavelength TX (typical) | 1310 nm |
| Wavelength RX (typical) | 1310 nm |
| Wavelength range TX | 1270–1355 nm |
| Wavelength range RX | 1260–1610 nm |
| Power budget | 10 dB |
| Transmit MIN/MAX | -9 / -1 dBm |
| Receiver MIN/MAX (Overload) | -19 / -1 dBm |
| Extinction Ratio | 9 dB |
| Laser type | Fabry-Perot (FP) |
| Laserclass | 1 |
Questions & answers
What is the delivery time of MICROSENS MS100001D SFP GbE Extender FP Transceiver 1.25 Gbit/s Multimode 1310 nm, max. 2 km, DDM, LC?
The article MICROSENS MS100001D SFP GbE Extender FP Transceiver 1.25 Gbit/s Multimode 1310 nm, max. 2 km, DDM, LC is currently in stock
According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of MICROSENS MS100001D to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you MICROSENS MS100001D SFP GbE Extender FP Transceiver 1.25 Gbit/s Multimode 1310 nm, max. 2 km, DDM, LC always at the best possible price. We can give you a discount of 2% on MICROSENS MS100001D SFP GbE Extender FP Transceiver 1.25 Gbit/s Multimode 1310 nm, max. 2 km, DDM, LC if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 5 pieces of MICROSENS MS100001D SFP GbE Extender FP Transceiver 1.25 Gbit/s Multimode 1310 nm, max. 2 km, DDM, LC we can offer you a price of 143,01 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

