Metrix HX0031 BNC adapter PROBIX content_copy

The Probix/BNC adapter HX0031 from Metrix is a specific accessory for SCOPIX oscilloscopes of the OX 9000 and OX 7000 series. It serves as an interface between the Probix connection of the oscilloscope and BNC accessories, particularly for voltage measurements. The connection is made via a Plug-and-Play system, where the oscilloscope automatically detects the connected adapter and queries its technical specifications. This enables the display of relevant information and safety warnings for the user, making operation safer and more efficient.

Applications

The adapter is designed for professional applications in electrical engineering, power electronics, and maintenance and repair work. It is particularly suitable for measurements in industrial environments where high voltages and frequencies occur. The combination with BNC cables or standard cables allows flexible adaptation to different measurement tasks.

Functions and Features in Detail

The adapter enables direct connection of BNC connectors to the Probix system. Power supply and calibration of the connected measurement probes are handled by the oscilloscope, eliminating the need for external power sources or calibration devices. This reduces the complexity of the measurement setup and decreases the risk of errors. The automatic detection of the adapter ensures that the oscilloscope can make the correct settings without requiring manual input from the user.

Technology Explained Simply

The adapter is rated for a maximum voltage of 600 V CAT III, making it suitable for measurements in industrial plants and electrical installations. The bandwidth of 250 MHz allows capture of high-frequency signals, which is important for analyzing switching processes, PWM signals, or other fast electrical phenomena. The safety standard CAT III refers to the category of electrical installations typically operated at voltages up to 600 V, and guarantees a high level of protection for the user.

Compatibility and Accessories

The adapter is exclusively designed for SCOPIX oscilloscopes of the OX 9000 and OX 7000 series. It is part of the Probix system, which provides a standardized interface for various measurement accessories. Compatible accessories, such as opening clamps for AmpFLEX (black, 10 pcs), can be used additionally to adapt the measurement setup to specific requirements. The use of BNC cables is directly possible, as the adapter supports BNC connections.

Mounting and Installation

Installation is done by simply plugging the adapter into the Probix connector of the oscilloscope. Connection to the measurement object is made via a BNC cable or a standard cable, depending on the requirement. The automatic detection by the oscilloscope ensures that no additional settings need to be made on the device. The power supply for the connected probe is provided by the oscilloscope, eliminating the need for an external power source.

Advantages in Operation

Using the Probix/BNC adapter increases safety and efficiency during measurement. Automatic detection and configuration reduce error susceptibility and speed up the workflow. The high bandwidth and voltage tolerance enable use in demanding environments. Direct power supply from the oscilloscope reduces the number of required devices and cables, making the measurement setup clearer and more organized.