Meanwell HDR-60-5 ALLNET replacement power supply 5V 6A 60W MEAN WELL rail mount content_copy

The Meanwell HDR-60-5 is a universal power supply for use in industrial and household applications. It delivers a constant voltage of 5 Volts with a maximum output power of 60 Watts and a current of 6.5 Amperes. The device is designed for mounting on a DIN-Rail (TS-35/7.5 or TS-35/15) and is therefore particularly suitable for use in enclosures and control systems. The compact design with a width of 52.5 mm enables space-saving installation in 3SU enclosures. The power supply operates with a universal input voltage range of 85 to 264 Volts AC, making it usable worldwide. The operating temperature ranges from -30 to +70 degrees Celsius, with power reduced at higher temperatures according to the manufacturer's specifications (Derating). Cooling is achieved through free air convection, without the need for additional fans or active cooling.

Applications

The HDR-60-5 is designed for use in industrial control systems, building automation, factory automation, and electromechanical devices. It is particularly suitable for applications requiring a reliable and compact power supply with minimal space requirements. Compliance with standards IEC62368-1, UL508, UL623ron-1, and BS EN/EN61558-2-16 ensures safety and compatibility across various application areas.

Functions and Features in Detail

The power supply features Isolation Class II, meaning it can operate without an additional protective earth conductor. The protection rating IP20 protects against contact with fingers and solid foreign objects, but is not suitable for outdoor use or in damp environments. The output voltage is not dimmable, but is constantly set to 5 V. Power supply connections are made via screw terminals, enabling secure and easy connections. An integrated LED indicator signals the device's operation. The no-load power loss is less than 0.3 Watts, enhancing energy efficiency. The efficiency values reach up to 91 %, indicating high efficiency in power conversion.

Technology Explained Simply

The HDR-60-5 operates as a constant voltage supply (CV), meaning the output voltage remains constant regardless of load. The input voltage is accepted over a wide range of 85 to 264 VAC, allowing the device to operate stably even with fluctuating mains voltages. Cooling is passive via air convection, minimizing noise and increasing lifespan. Protection functions include short-circuit, overload, and overvoltage protection. In case of a fault, the device shuts off the output and automatically restores it after the fault is cleared. The isolation between input and output is 4 kV AC, ensuring high electrical safety.

Compatibility and Accessories

The power supply is designed for mounting on DIN-Rail (TS-35/7.5 or TS-35/15). Compatible mounting accessories such as 48,3 cm ( 19 inch ) device holders for DIN-Rail devices or DIN-RAIL wall-mounted enclosures (e.g. SO-DIN series) can be used additionally to install the device in enclosures or on walls. The mentioned accessories are suitable for mounting and protecting the power supply, with enclosures featuring a protection rating of IP20, which represents a higher protection class than the power supply itself.

Installation and Mounting

Mounting is done directly onto the DIN-Rail, with mounting screws located on the device. Electrical connections are made via screw terminals on the rear of the device. Installation and commissioning must only be carried out by qualified personnel, as specified in the manufacturer's description. Compliance with safety regulations is essential to avoid damage or hazards.

Operational Advantages

The HDR-60-5 is characterized by high reliability, low maintenance, and long service life. Passive cooling reduces wear and noise emissions. The universal input voltage and high efficiency make the device a flexible solution for various applications. Integrated protection functions increase operational safety. The 3-year warranty underscores the product's quality.

Technical data
Constant current or constant voltage	CV
Protection class	IP20
Volt	5 Volt
Watt	60 W
Operation temperature	-30 to +70 degrees
Size	52,5*90*54,5 mm
Ampere (CC)	6,5 A
Dimmable

---