Cover on the roll made of polycarbonate (PC) according to the NORM TP(a) classified for SLOTLIGHT infinity Wallwasher light opal/diffuse with black shadow gap. Dimensions: 10150 x 65 x 1 mm Weight: 2 kg
Lieske Part No.: 2095915

Cover on the roll made of polycarbonate (PC) according to the NORM according to TP(a) classified for SLOTLIGHT infinity Wallwasher light opal/diffuse with black shadow gap. Dimensions: 20150 x 65 x 1 mm Weight: 3.9 kg
Lieske Part No.: 2095916

Anti-dazzle ring and oval drawing film 1/60, dimensions: diameter 63 x 16 mm, weight: 0.01 kg
Lieske Part No.: 1341522

Anti-glare ring and foil with wide flood beam characteristics, dimensions: diameter 63 x 16 mm, weight: 0.01 kg
Lieske Part No.: 1341521

Anti-glare ring and foil with spot beam characteristics, dimensions: diameter 63 x 16 mm, weight: 0.01 kg
Lieske Part No.: 1341520

Connection cable with contact clips, consists of low-voltage cable (3m) and contact clips, white
Lieske Part No.: 1341518

Connection cable with contact clips, consists of low-voltage cable (3m) and contact clips, black
Lieske Part No.: 2096161

Connection cable 5-pin AC/Dali, 2000mm, transparent
Lieske Part No.: 1341515

5-pin through-wiring for connecting the SLOTLIGHT infinity slim / EQL/SLOT1/SLOT2 bars.
Lieske Part No.: 1341605

Cover on the roll from the NORM according to TP(a) classified for SLOTLIGHT infinity Wallwasher light opal/diffuse with black shadow gap. Dimensions: 3000 x 38 x 1 mm Weight: 0.62 kg
Lieske Part No.: 2091953

Cover on the roll made of polycarbonate (PC) according to NORM TP(a) classified for SLOTLIGHT infinity Opal/Diffuse with black shadow gap. Dimensions: 30150 x 65 x 1 mm Weight: 5.3 kg
Lieske Part No.: 2089447

Rain cover for the wall-mounted RESCLITE PRO IP65 luminaire
Lieske Part No.: 2090567

Replacement reflector made of black aluminum, clicks onto the light without tools (can be mounted on both sides). Reflector end caps must be ordered separately. Dimensions: 1996 x 84 x 2 mm. Weight: 0.7 kg
Lieske Part No.: 2090585

Holder for through wiring. Weight: 0.1 kg
Lieske Part No.: 2090515

Cover made of. Dimensions: 3650 x 65 x 1 mm Weight: 0.7 kg
Lieske Part No.: 2091937

Cover made of. Dimensions: 3900 x 65 x 1 mm Weight: 0.75 kg
Lieske Part No.: 2091938

1 wall mounting bracket in white (similar to RAL 9016) including mounting spring for SLOTLIGHT Infinity & SLOTLIGHT infinity II for horizontal mounting on the wall. Maximum weight per wall mounting bracket is 15kg.
Lieske Part No.: 2131092

End cap set to complete a single light or a light strip. Set includes: 2 pieces of plastic end caps in black, 2 pieces of profile end caps in white. 1 set required for a single light or per light strip. Weight: 0.15 kg
Lieske Part No.: 2091813

End cap set to complete a single light or a light strip. Set includes: 2 pieces plastic end caps in bronze, 2 pieces profile end caps in white. 1 set required for a single light or per light strip. Weight: 0.15 kg
Lieske Part No.: 2091814

End cap set to complete a single light or a light strip. Set includes: 2 pieces of plastic end caps in silver, 2 pieces of profile end caps in white. 1 set required for a single light or per light strip. Weight: 0.15 kg
Lieske Part No.: 2091815

End cap set to complete a single light or a light strip. Set includes: 2 pieces of plastic end caps in , 2 pieces of profile end caps in white. 1 set required for a single light or per light strip. Weight: 0.15 kg
Lieske Part No.: 2091816

End cap set to complete a single light or a light strip. Set includes: 2 pieces of plastic end caps in silver, 2 pieces of profile end caps in white. 1 set required for a single light or per light strip. Weight: 0.12 kg
Lieske Part No.: 2091826

End cap set to complete a single light or a light strip. Set includes: 2 pieces of plastic end caps in white, 2 pieces of profile end caps in white. 1 set required for a single light or per light strip. Weight: 0.12 kg
Lieske Part No.: 1778788

Cover strip (1 piece) for the mounting rail made of plastic polypropylene in black. Dimensions: 1498 x 60 x 35 mm Weight: 0.1 kg
Lieske Part No.: 2092493

Cover strip (1 piece) for the mounting rail made of plastic polypropylene in white. Dimensions: 1498 x 60 x 35 mm Weight: 0.1 kg
Lieske Part No.: 2092494

Cover strip (1 piece) for the mounting rail made of plastic polypropylene in white. Dimensions: 1997 x 60 x 35 mm Weight: 0.1 kg
Lieske Part No.: 1776346

LED replacement set for converting an existing SLOTLIGHT I system to efficient LED technology. Luminaire output: 7 W, DALI controllable luminaire with LED converter, LED service life 50,000 hours until the luminous flux drops to 80% of the initial value. Color tolerance (initial MacAdam): 3. Luminaire luminous flux: 670 lm, luminaire luminous efficacy: 96 lm/W. Color rendering Ra > 80, color temperature 4000 K. The lighting data is for a luminaire with bars, SLOT1 profile and a SLOT1 cover. Luminaire wired halogen-free. Dimensions: 550 x 49 x 70 mm Weight: 0.92 kg. Important: When replacing SLOT1 T16, a 1:1 exchange is possible. Configuration in a light strip also possible.
Lieske Part No.: 2091198

LED replacement set for converting an existing SLOTLIGHT I system to efficient LED technology. Luminaire output: 11 W, DALI controllable luminaire with LED converter, LED service life 50,000 hours until the luminous flux drops to 80% of the initial value. Color tolerance (initial MacAdam): 3. Luminaire luminous flux: 1031 lm, luminaire luminous efficacy: 94 lm/W. Color rendering Ra > 80, color temperature 4000 K. The lighting data is for a luminaire with bars, SLOT1 profile and a SLOT1 cover. Luminaire wired halogen-free. Dimensions: 850 x 49 x 70 mm Weight: 1.23 kg. Important: When replacing SLOT1 T16, a 1:1 exchange is possible. Configuration in a light strip also possible.
Lieske Part No.: 2091199

LED replacement set for converting an existing SLOTLIGHT I system to efficient LED technology. Luminaire output: 14 W, DALI controllable luminaire with LED converter, LED service life 50,000 hours until the luminous flux drops to 80% of the initial value. Color tolerance (initial MacAdam): 3. Luminaire luminous flux: 1399 lm, luminaire luminous efficacy: 100 lm/W. Color rendering Ra > 80, color temperature 4000 K. The lighting data is for a luminaire with bars, SLOT1 profile and a SLOT1 cover. Luminaire wired halogen-free. Dimensions: 1150 x 49 x 70 mm Weight: 1.53 kg. Important: When replacing SLOT1 T16, a 1:1 exchange is possible. Configuration in a light strip also possible.
Lieske Part No.: 2091196

LED replacement set for converting an existing SLOTLIGHT I system to efficient LED technology. Luminaire output: 18 W, DALI controllable luminaire with LED converter, LED service life 50,000 hours until the luminous flux drops to 80% of the initial value. Color tolerance (initial MacAdam): 3. Luminaire luminous flux: 1760 lm, luminaire luminous efficacy: 98 lm/W. Color rendering Ra > 80, color temperature 4000 K. The lighting data is for a luminaire with bars, SLOT1 profile and a SLOT1 cover. Luminaire wired halogen-free. Dimensions: 1450 x 49 x 70 mm Weight: 1.84 kg. Important: When replacing SLOT1 T16, a 1:1 exchange is possible. Configuration in a light strip also possible.
Lieske Part No.: 2091197

LED replacement set for converting an existing SLOTLIGHT I system to efficient LED technology. Luminaire output: 16.6 W, DALI controllable luminaire with LED converter, LED service life 50,000 hours until the luminous flux drops to 80% of the initial value. Color tolerance (initial MacAdam): 3. Luminaire luminous flux: 1350 lm, luminaire luminous efficacy: 81 lm/W. Color rendering Ra > 80, color temperature 3000 K. The lighting data is for a luminaire with bars, SLOT1 profile and a SLOT1 cover. Luminaire wired halogen-free. Dimensions: 1150 x 49 x 70 mm Weight: 1.53 kg. Important: When replacing SLOT1 T16, a 1:1 exchange is possible. Configuration in a light strip also possible.
Lieske Part No.: 2091957

Ersatzteil für Produktfamilie SLOTLIGHT I LED Replacement. Profil 2862 (2x1/35)W aus Acrylglas (PMMA), satin teiltransparent, Diffuserperlmaterial. Abmessungen: 2862 mm x 64 mm x 23 mm. Gewicht: 0,68 kg
Lieske Part No.: 312157

Spare part for product family SLOTLIGHT II LED Replacement. Cover PM SLOT2 ABD PM LED 1200 K1206
Lieske Part No.: 2096147

Spare part for product family SLOTLIGHT II LED Replacement. Cover LRO SLOT2 ABD LRO LED 2100 K2106
Lieske Part No.: 2096144

Spare part for product family SLOTLIGHT II LED Replacement. Cover LRO SLOT2 ABD LRO LED 3000 K3006
Lieske Part No.: 2096145

Spare part for product family SLOTLIGHT II LED Replacement. Cover PM SLOT2 ABD PM LED 3600 K3606
Lieske Part No.: 2096146

Spare part for product family SLOTLIGHT II LED Replacement. Cover PM SLOT2 ABD PM LED 4200 K4206
Lieske Part No.: 2096148

Spare part for product family SLOTLIGHT II LED Replacement. Cover PM SLOT2 ABD PM LED 4500 K4506
Lieske Part No.: 2096149

Spare part for product family AMPHIBIA, housing made of polymethylmethacrylate,
Lieske Part No.: 2090516

LED power supply 30 W, 700-1400 mA, 220-240 V, 0/50/60 Hz, dimensions: 180 x 30 x 21 mm, weight: 0.12 kg
Lieske Part No.: 2089559

Short circuit bridge for distributor, weight: 0 kg
Lieske Part No.: 2089558

Extension cable (1 m), weight: 0.01 kg
Lieske Part No.: 2089557

Clear cover panel (R68), to achieve protection class IP44 with MICROS II recessed luminaires in closed ceilings, dimensions: diameter 68 x 7 mm, weight: 0.01 kg
Lieske Part No.: 2091882

Opal inner ball for SCONFINE SFERA 500 E27 made of glass, ensures optimized glare control and, together with the mirrored surface of the pendant light, reinforces the impression of plasticity and spatial depth, weight: 2.4 kg
Lieske Part No.: 478953

Decorative ring for PANOS infinity / evolution DA (R) 150 mm, silver anodized, decorative attachment ring made of brushed aluminum, quick installation using bayonet fastening, weight: 0.13 kg, Note: Not suitable for lights in flush-mounted/trimless design and combination with surface-mounted housing!
Lieske Part No.: 966661

Attachment, clear for PANOS infinity / evolution DA (R) 150 mm, to achieve protection class IP54 with PANOS infinity / evolution recessed luminaires in closed ceilings, dimensions: diameter 180 x 10 mm, weight: 0.17 kg Note: Not suitable for luminaires in flush-mounted / trimless design and combination with surface-mounted housing!
Lieske Part No.: 545873

Decorative ring for PANOS infinity / evolution DA (R) 200 mm, anthracite anodized, decorative attachment ring made of brushed aluminum, quick installation using bayonet fastening, weight: 0.17 kg, Note: Not suitable for lights in flush-mounted/trimless design and combination with surface-mounted housing!
Lieske Part No.: 966660

Planar frame for PANOS infinity Q 190 mm, for flush installation of PANOS infinity recessed luminaires (flush version/trimless) in plaster ceilings, made of aluminium, perforated with plaster edge, weight: 0.28 kg
Lieske Part No.: 966620

Attachment, clear for PANOS infinity / evolution Q 140 mm, to achieve protection class IP54 with PANOS infinity / evolution Q recessed luminaires in closed ceilings, dimensions: 160 x 160 x 8 mm, weight: 0.18 kg Note: Not suitable for luminaires in flush-mounted / trimless design and combination with surface-mounted housing!
Lieske Part No.: 966651

Attachment, clear for PANOS infinity / evolution Q 190 mm, to achieve protection class IP54 with PANOS infinity / evolution Q recessed luminaires in closed ceilings, dimensions: 210 x 210 x 8 mm, weight: 0.3 kg Note: Not suitable for luminaires in flush-mounted / trimless design and combination with surface-mounted housing!
Lieske Part No.: 966641