Online retailer for industrial customers, commercial customers and public institutions - no sales to private customers
Switch to german languageIndustry-Electronics in English

Lapp 1591217 A-2YF(L)2Y..STIII BD 2x2x0.8 telecommunication waterproof

Your rating:
Average rating
product review for Lapp 1591217 A-2YF(L)2Y..STIII BD 2x2x0.8 telecommunication waterproof
( 4.6 / 5 ) 22 ratings
Lapp 1591217
This image may differ from the desired article.
Lapp 1591217Lapp 1591217
1,50 EUR
incl. 0,22 EUR copper surcharge
( 1,79 EUR incl. VAT )
≈ £1.26  |  ≈ $1.65
plus delivery charges: 55,00 €
Made to order · Delivery time approx. 20 workdaysinfo_outline
1x Lapp 1591217 A-2YF(L)2Y..STIII BD 2x2x0.8 telecommunication waterproof
Lieske Part No.:1324967
Mfg Part No: 1591217
UPC/EAN: 4044773795684
Weight:0.048 kg
Type:A-2YF(L)2Y...ST III BD 2x2x0,8

Product information for Lapp 1591217:

The product is a telephone cable of type designation A-2YF(L)2Y...ST III BD 2x2x0.8, manufactured by Lapp. It is a telecommunications earth cable designed for permanent installation in outdoor environments and can withstand occasional movements during operation. The cable is manufactured in accordance with standard VDE 0816 and is suitable for the transmission of telephone and data lines in industrial, municipal, or private installations where high mechanical and environmental resistance is required.

Telecommunications earth cable are specifically designed for installation underground or in other protected, but not enclosed, environments. The cable features PE insulation, providing high resistance to moisture, UV radiation, and chemical influences. The shielded construction ensures effective shielding against electromagnetic interference, enhancing signal quality for data and voice transmission.

Applications include installation in earth ducts, underground trenching, concrete or asphalt structures, and other fixed installations that may be subject to occasional mechanical stress. The cable is not intended for mobile applications such as in robotics systems or moving machinery, but for stationary connections where the line is not altered after installation.

Functions and equipment in detail include a construction with two pairs (2x2) of conductors, each having a cross-section of 0.8 mm². This configuration enables the simultaneous transmission of multiple signals, for example, for telephone connections or analog data lines. The use of PE (polyethylene) as insulating material ensures high electrical insulation and resistance to moisture, which is crucial for outdoor use.

Technology explained simply means that the cable has a multi-layered structure: individual conductors are insulated with PE, the pairs are shielded together, and the entire cable is surrounded by an outer PE sheath. This design protects the signal lines from external interference and mechanical stress. The shielded property reduces sensitivity to electromagnetic interference, which is particularly beneficial in environments with high electromagnetic noise, such as near motors or transformers.

Compatibility and accessories refer to use in existing telephone and data infrastructures designed according to VDE 0816. The cable can be connected with standard connectors, such as RJ11 or RJ45 connectors, provided the number and cross-section of conductors are compatible.

Installation and mounting typically involve trenching or laying in pre-fabricated channels. The cable is designed for permanent installation and is therefore not suitable for mobile applications. Installation should be carried out to avoid mechanical overloading, especially during bends that fall below the permissible bending radius.

Operational advantages include high mechanical strength, resistance to weather influences, and low susceptibility to interference. The cable structure ensures reliable signal transmission over long distances, which is important for use in public or industrial networks. The use of PE as insulating and sheathing material ensures a long service life and low maintenance requirements.

General
ApplicationFixed installation
Insulating materialPE
NormVDE 0816
Number of conductor pairs2
Conductor cross section0,8 mm²
Application rangeExterior area
InstallationFixed
MovementOccasional movement
ScreenedYes


Please note...
For this article, we charge 14,85 EUR for measuring, cutting and re-furling the cable. If you take a whole 100m or 500m cable reel, the charge will of course be dropped.

The final cable weight will be determined before invoicing. The calculation is based on the copper content and any additional weight due to drums, pallets, or outer packaging. Prices are subject to this subsequent calculation.

Please note that for cables, that are not in stock and must be produced, the manufacturer may need an order of a minimum length that can be 5-10km depending on cable type!
This article contains a copper surcharge of 0,22 EUR. This depends on daily copper prices and weight of included copper. You can inquire the copper price via phone under +49 7666 884990

Questions & answers

What is the delivery time of Lapp 1591217 A-2YF(L)2Y..STIII BD 2x2x0.8 telecommunication waterproof ?

The article Lapp 1591217 A-2YF(L)2Y..STIII BD 2x2x0.8 telecommunication waterproof is currently not in stock and must be ordered on a per-order basis.

According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Lapp 1591217 to our sales team for an exact delivery time.

How can I buy the item at a lower price?

We offer you Lapp 1591217 A-2YF(L)2Y..STIII BD 2x2x0.8 telecommunication waterproof always at the best possible price. We can give you a discount of 2% on Lapp 1591217 A-2YF(L)2Y..STIII BD 2x2x0.8 telecommunication waterproof if you choose payment in advance on ordering.

We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.

 


Searching
Search is performed.
Please be patient ...
Fehlende Felder
Close
Product in the shopcart

The following item has been put into your shopping cart by our system:

1x Lapp 1591217 A-2YF(L)2Y...ST III BD 2x2x0,8 telecommunication earth cable waterproof
Lapp 1591217 A-2YF(L)2Y..STIII BD 2x2x0.8 telecommunication waterproof
1,50 EUR
Sum of all articles in cart
plus VAT
You can continue shopping and open your cart at any time from the top menu bar or now directly by clicking the button.
Enquiry: Lapp 1591217 A-2YF(L)2Y...ST III BD 2x2x0,8 telecommunication earth cable waterproof
Company name
Name
Homepage
Street
ZIP-Code City
Country
Telephone
Desired quantity
Comment
9 + 4 =
Data protection notice: The data entered here will only be electronically stored and processed for the purpose of responding to your inquiry in accordance with Art. 6 GDPR para. 1b. The basis for this is our privacy policy.
Name and email address are the only mandatory fields.

We use cookies. Some are required to run the shop (e.g. shopping cart and login), others help us improve it (Google Analytics). Statistics cookies are only used with your consent. See our privacy policy for details.