Lapp 1135304/100 ÖLFLEX CLASSIC 110 CY 4G 1.5 100 m 300/500 V PVC flexible content_copy

The control cable ÖLFLEX® CLASSIC 110 CY 4G1,5 from Lapp is a flexible PVC cable designed for use in industrial plants and machines. It is intended for moderate mechanical stress and is suitable for fixed installation as well as occasional movement without tensile stress. The cable is used in dry and damp rooms and is universally suitable for wiring internal machine and plant-wide control circuits. The PVC outer sheath is resistant to acids and alkalis and conditionally oil-resistant, which expands its application possibilities in various industrial environments.

Applications

The cable is designed for applications requiring high electrical safety and electromagnetic compatibility (EMC). It is used in the machine and plant construction industry, where control and signal transmissions occur between components. The cable is used both indoors and in damp environments, as long as there is no direct, continuous water exposure. The cable is not intended for outdoor use or in explosive areas.

Functions and equipment in detail

The ÖLFLEX® CLASSIC 110 CY 4G1,5 features a shielded construction with a copper braided shield that provides high coverage. This ensures effective protection against electromagnetic interference (EMC), which is particularly advantageous in environments with strong electromagnetic fields. The conductors are numbered, simplifying identification and wiring. The cable is VDE-tested and carries registration number 7030, confirming compliance with relevant safety and quality standards.

Technology explained simply

The cable has a rated voltage of 300/500 V (U0/U) and is designed for a test voltage of 4000 V, providing high electrical safety. The reduced wall thickness of the PVC outer sheath enables space-saving installation, especially in tight installation conditions. The construction with copper braided shield ensures low interference, improving signal quality in control and transmission systems. The PVC insulation is flexible and resistant to chemical influences such as acids and alkalis.

Compatibility and accessories

The cable is part of the ÖLFLEX CLASSIC 110 CY product series and can be combined with other variants of this series, such as 2G, 3G, 5G, 7G, 12G, or 18G, with the same cross-section of 1.5 mm². These variants differ in the number of conductors and are suitable for different applications.

Installation and mounting

The cable is intended for fixed installation and can be used for occasional movement without tensile stress. Installation follows standard procedures for flexible control cables, with mechanical stress limited. The cable is installed in dry and damp rooms, where ambient temperature and mechanical load influence service life. The cable is not suitable for outdoor use or in damp, open areas where continuous moisture or direct sunlight is present.

Advantages in operation

The ÖLFLEX® CLASSIC 110 CY 4G1,5 offers high electrical safety due to the 4000 V test voltage and effective EMC protection via the copper braided shield. The space-saving construction with reduced wall thickness facilitates installation in confined spaces. VDE testing and classification according to EU Directive 305/2011 (BauPVO/CPR) guarantee compliance with applicable standards. The cable is suitable for a wide range of industrial applications, particularly in control technology and signal transmission.

The item price shown refers to 100 meters Lapp 1135304/100

General
Cable type	control cable
Manufacturer	Lapp
Number of conductors	4
Core cross section	1,5 mm²
Nominal voltage	300/500 V
Test voltage	4000 V
Insulating material	PVC
Wire identification	numbers
Shielding	Copper shield braid
VDE registration number	7030
Application	Medium mechanical stress, fixed installation, occasional movement without tensile stress
Operating environment	dry and damp rooms
Flame retardancy	in accordance with EU Directive 305/2011 (BauPVO/CPR)
Chemical resistance	Resistant to acids and alkalis, conditionally oil-resistant

---