Lapp 1119802/100 ÖLFLEX CLASSIC 110 2x0.75 100 VDE 300/500 V PVC oil-resistant content_copy

The control cable ÖLFLEX® CLASSIC 110 2X0.75 from Lapp is a flexible cable designed for use in industrial plants and machinery. It is designed for medium mechanical stress and is suitable for both fixed installation and occasional movement without tensile stress. The cable construction also enables flexible, continuously moving use in moving machine parts as well as in drag chains. The cable is suitable for use at temperatures down to -15 °C and can be used in dry and damp rooms. The PVC outer sheath is resistant to acids and alkalis and offers certified oil resistance according to DIN EN 50290-2-22 (TM54). The cable is also tested for resistance to ECOLAB® disinfectants and cleaning agents, making it suitable for applications in the food industry or in the medical sector.

Control cable is the primary function of this product, with the cable being universally applicable for wiring internal machine and plant-wide control circuits. The conductors are numbered, enabling easy identification and wiring. The cable is marked with VDE registration number 7030 and complies with VDE testing requirements. Electrical safety is ensured by a test voltage of 4000 V, highlighting high insulation quality and reliability. The reduced wall thicknesses ensure space-saving use, especially in tight installation situations.

Flexible is the central feature of the cable, reflected in its construction. It is designed for continuous movement in machine parts, including torsion applications in wind turbines. The cable is therefore suitable for dynamic operating conditions in industrial automation. The rated voltage is U0/U: 300/500 V, qualifying it for a wide range of control and signal applications in machine building and manufacturing technology.

PVC as insulating and protective sheath material offers good mechanical stability and chemical resistance. The cable is suitable for use in dry and damp environments, with the PVC sheath ensuring resistance to moisture and common chemicals. The classification of fire behaviour is according to EU Directive 305/2011 (BauPVO/CPR), with the exact classification available via article number selection on the LAPP website.

Oil resistance is a key advantage, especially in environments with oil and grease contact, such as in metalworking or machine building. Resistance according to DIN EN 50290-2-22 (TM54) ensures long service life and prevents material ageing due to oils. The cable is available in a length of 100 metres and belongs to a series of 145 standard articles available in various conductor counts (2 to 100) and lengths, including individual cuts.

The cable is designed for use in industrial plants, machinery and drive systems. It is particularly suitable for control and signal transmission where high mechanical load capacity and chemical resistance are required. The combination of flexible construction, oil-resistant sheath and high electrical safety makes it a reliable choice for demanding operating conditions. Use in drag chains and moving machine parts is supported by the special cable construction, which also withstands torsional loads in wind turbines.

Classified fire behaviour according to EU Directive 305/2011 (BauPVO/CPR) is another important aspect, ensuring suitability for use in buildings and plants with specific fire protection requirements. The exact classification is available on the LAPP website depending on the article number. The cable is thus suitable not only for industrial but also for plant-wide applications where safety and environmental standards are relevant.

VDE-tested quality guarantees that the cable complies with German and European standards. The testing includes electrical insulation, mechanical strength and chemical resistance. The high test voltage of 4000 V underscores the reliability and safety of the cable under operating conditions. Use in industrial automation, manufacturing technology and energy generation (e.g. wind turbines) is supported by the specific properties of the cable.

The cable is available in a length of 100 metres and can be ordered in various configurations (2 to 100 conductors). The numbered conductor identification simplifies installation and maintenance. The reduced wall thicknesses ensure lower space requirements, which is advantageous when installing in confined spaces or in drag chains. The cable is suitable for use in dry and damp rooms, with the PVC sheath ensuring resistance to moisture and common chemicals.

Torsion applications in wind turbines are a specific application area where the cable is load-bearing due to its special construction. The flexibility and mechanical stability enable safe use in rotating or pivotable machine parts. The tested resistance to ECOLAB® disinfectants and cleaning agents also makes the cable suitable for applications in the food industry or in the medical sector, where hygiene requirements are high.

The control cable ÖLFLEX® CLASSIC 110 2X0.75 is thus a versatile, robust and safety-compliant solution for industrial control and signal applications. The combination of flexible construction, chemical resistance and high electrical safety makes it a reliable choice for demanding operating conditions in manufacturing, automation and energy generation.

The item price shown refers to 100 meters Lapp 1119802/100

General
Degree of protection	PVC
Operating voltage	300/500 V
Wire identification	numbers
Oil resistance	DIN EN 50290-2-22 (TM54)
Test voltage	4000 V
VDE registration number	7030
Application	for medium mechanical stress, flexible movement, drag chains, torsion applications
Resistance	resistant to acids, alkalis, ECOLAB® disinfectants and cleaning agents
Temperature range	-15 °C
Flame retardancy	in accordance with EU Directive 305/2011 (BauPVO/CPR)

---