Lapp 1119754/500 ÖLFLEX CLASSIC 110 4x0.5 VDE 300/500 V PVC oil resistant 1119754 content_copy

The control cable ÖLFLEX® CLASSIC 110 4X0.5 from Lapp is a flexible cable for use in industrial plants and machines. It is suitable for medium mechanical stress and can be used for fixed installations as well as occasional movements without tensile load. The cable construction also allows for flexible, continuous movement in moving machine parts and in drag chains. The cable is suitable for use in dry and damp rooms and features a PVC outer sheath resistant to acids and alkalis. Additionally, it is oil-resistant according to DIN EN 50290-2-22 (TM54) and tested for resistance to ECOLAB® disinfectants and cleaning agents. The cable is universally applicable for wiring internal machine and cross-plant control circuits. Use at temperatures down to -15 °C is possible. The cable is also suitable for torsion applications in wind turbines. The VDE registration number 7030 confirms its tested quality. The cable offers high electrical safety with a test voltage of 4000 V. The reduced wall thicknesses ensure space-saving installation. The conductors are numbered, facilitating identification and wiring. The cable is classified according to EU Directive 305/2011 (BauPVO/CPR), with article number selection available on the LAPP website.

Applications
The ÖLFLEX® CLASSIC 110 4X0.5 is designed for applications in industry, particularly in machine and plant engineering. It is frequently used in control and signal systems where a flexible yet robust cable is required. The cable is suitable for use in moving machine parts, such as in drag chains, as well as in plants with torsional loads, such as in wind turbines. Its resistance to oil, acids, alkalis, and disinfectants makes it suitable for demanding environments in the food industry or in medical applications. Use in dry and damp rooms is possible, making it applicable in a wide range of production environments.

Functions and Equipment in Detail
The cable features four conductors with a cross-section of 0.5 mm², which are numbered to enable clear identification. The PVC outer sheath provides protection against mechanical stress, moisture, and chemical influences. The cable is rated for an operating voltage of 300/500 V and has a test voltage of 4000 V, ensuring high electrical safety. The reduced wall thicknesses of the sheath result in a compact design, saving space in cable routing areas. The oil-resistant property according to DIN EN 50290-2-22 (TM54) protects the cable from wear caused by oils and fats, which is particularly important in manufacturing technology. The tested resistance to ECOLAB® products also makes it suitable for cleaning and disinfection processes.

Technology Explained Simply
The ÖLFLEX® CLASSIC 110 4X0.5 is a flexible control cable developed for use in industrial environments. The PVC sheath protects the conductors from mechanical and chemical influences. The numbered conductor identification simplifies wiring and maintenance. The cable is rated for an operating voltage of 300/500 V, which is sufficient for most control and signal applications. The test voltage of 4000 V indicates that the insulation has high electrical strength. The reduced wall thicknesses of the sheath allow for compact installation, which is advantageous in limited space within machines or enclosures. The oil-resistant property protects the cable from wear caused by industrial oils and fats, extending its service life.

Compatibility and Accessories
The cable is universally applicable and can be combined with various connectors, cable lugs, and other connection elements suitable for PVC insulation. Use in drag chains and moving machine parts is possible, with medium mechanical stress. The cable is suitable for torsion applications in wind turbines, increasing its versatility. Classification according to EU Directive 305/2011 (BauPVO/CPR) enables use in construction products, with exact classification selection available on the LAPP website.

Installation and Mounting
The cable is designed for fixed installation and occasional movement without tensile stress. Installation follows standard procedures for flexible control cables, ensuring mechanical stress does not exceed the specified medium load. Installation in drag chains or moving machine parts is possible, provided movement occurs without tensile load. The cable can be installed in dry and damp rooms, with ambient temperatures down to -15 °C. The numbered conductor identification simplifies installation and maintenance.

Operational Advantages
The ÖLFLEX® CLASSIC 110 4X0.5 offers high mechanical and chemical resistance, extending the cable’s service life. The oil-resistant property protects against wear from industrial oils and fats. The reduced wall thicknesses enable space-saving installation, which is beneficial in limited cable routing space. High electrical safety, ensured by the 4000 V test voltage, guarantees safe operation. The numbered conductor identification simplifies wiring and maintenance. The cable is suitable for a wide range of applications, including torsion applications in wind turbines, increasing its versatility.

General
Number of conductors	4
Core cross section	0,5 mm²
Operating voltage	300/500 V
Test voltage	4000 V
Wire identification	numbers
Insulating material	PVC
Degree of protection	oil resistant according to DIN EN 50290-2-22 (TM54)
Resistance	resistant to acids, alkalis, ECOLAB® disinfectants and cleaning agents
Temperature range	-15 °C
Installation method	Fixed installation, occasional movement without tensile stress
Application areas	moving machine parts, drag chains, torsion applications in wind turbines
VDE registration number	7030
Classification	in accordance with EU Directive 305/2011 (BauPVO/CPR)

---