Lapp 1119403 ÖLFLEX CLASSIC 110 3G 2.5 VDE 300/500 V PVC oil-resistant content_copy

The control cable ÖLFLEX® CLASSIC 110 3G2,5 from Lapp is a flexible, oil-resistant cable for use in industrial applications, particularly in machine and plant engineering. It is suitable for medium mechanical stress and can be used for fixed installations as well as occasional movements without tensile load. The cable construction also allows for flexible, continuously moving use in moving machine parts and in drag chains. The cable is suitable for use in dry and damp rooms and can be flexibly used at temperatures down to -15 °C. The PVC outer sheath is resistant to acids and alkalis and offers proven resistance to ECOLAB® disinfectants and cleaning agents. The cable is universally applicable for machine-internal and plant-wide control circuits and meets the requirements for oil-resistant cables according to DIN EN 50290-2-22 (TM54). The VDE registration number 7030 confirms the tested quality. The cable is equipped with numbered conductor identification, enabling clear assignment of conductors during wiring.

Applications
ÖLFLEX® CLASSIC 110 3G2,5 is designed for industrial applications requiring high mechanical load capacity and chemical resistance. It is frequently used in machine construction, conveying technology, packaging machines, and automation technology. Use in drag chains and moving machine parts is possible due to the flexible cable construction. The cable is also suitable for torsion applications, such as those found in wind turbines. It is designed for use in dry and damp environments and offers high resistance to industrial chemicals.

Functions and Equipment in Detail
The cable features a PVC outer sheath offering high resistance to acids, alkalis, and ECOLAB® cleaning agents. The conductors are numbered, simplifying wiring and maintenance. The cable is rated for an operating voltage of 300/500 V and meets the requirements for oil-resistant cables according to DIN EN 50290-2-22 (TM54). The VDE registration number 7030 ensures tested quality. The cable is designed for flexible and continuously moving applications, with tensile stress to be avoided. Reduced wall thicknesses enable space-saving installation.

Technology Explained Simply
ÖLFLEX® CLASSIC 110 3G2,5 is a control cable with three conductors, each with a cross-section of 2.5 mm². The PVC sheath protects the conductors and provides chemical resistance. The cable is rated for an operating voltage of 300/500 V, which is sufficient for most control applications in industry. The test voltage of 4000 V ensures high electrical safety. The cable is flexible and can be used at temperatures down to -15 °C. Numbered conductor identification simplifies installation and maintenance. The cable is suitable for use in drag chains and moving machine parts, with tensile stress to be avoided.

Compatibility and Accessories
The cable is universally applicable in machine-internal and plant-wide control circuits. It is compatible with other products in the ÖLFLEX® CLASSIC series and can be used in combination with suitable connectors, cable lugs, and protective conduits. The cable meets the requirements of EU Directive 305/2011 (BauPVO/CPR) regarding classified fire behaviour, with the exact classification available on the LAPP website by article number.

Installation and Mounting
The cable is intended for fixed installation and occasional movement without tensile stress. During installation, care must be taken to avoid tensile load on the cable, especially during movements in drag chains or moving machine parts. Numbered conductor identification simplifies conductor assignment. The cable can be installed in dry and damp rooms. Reduced wall thicknesses allow for space-saving installation.

Operational Advantages
ÖLFLEX® CLASSIC 110 3G2,5 offers high mechanical and chemical resistance, extending the cable's service life in demanding environments. Its flexible use in drag chains and moving machine parts increases application flexibility. Numbered conductor identification and VDE-tested quality simplify installation and maintenance. High electrical safety due to the 4000 V test voltage and space-saving construction with reduced wall thicknesses are further advantages in industrial operation.

General
Number of conductors	3 piece
Core cross section	2,5 mm²
Operating voltage	300/500 V
Test voltage	4000 V
Degree of protection	oil resistant according to DIN EN 50290-2-22 (TM54)
Wire identification	numbers
Outer sheath material	PVC
VDE registration number	7030
Minimum temperature	-15 °C
Flame retardancy	Classified according to EU Directive 305/2011 (BauPVO/CPR)

---