Installation Material

Replacement rubber roller for smartPRINTER Weidmüller Inline
Lieske Part No.: 551047

Thermal transfer ribbon for smartPRINTER only usable for 211-855 / -856 / -857 width 50 mm x 74 m
Lieske Part No.: 467704

Thermotransferdrucker, Smart Printer, für die komplette Schaltschrankbeschriftung, mobiles Starterkit, Ohne Beschriftungsmaterial
Lieske Part No.: 2146035

2-conductor terminal block with mounting flanges for screw and similar mounting types, mounting hole Ø 3.2 mm with mounting foot 209-123 also on TS 35 2-pole grey
Sales unit: 100 pieces
Lieske Part No.: 645588

2-conductor terminal block with mounting flanges for screw and similar mounting types, mounting hole Ø 3.2 mm with mounting foot 209-123 also on TS 35 4-pole grey
Sales unit: 100 pieces
Lieske Part No.: 343729

2-conductor terminal block, 5-pole, without push button, with mounting flanges, for screw and similar mounting types, mounting hole Ø 3.2 mm, 1.5 mm², CAGE CLAMP®, 1.50 mm², grey
Sales unit: 100 pieces
Lieske Part No.: 819792

2-conductor terminal block, 6-pin, without push button, with mounting flanges, for screw and similar mounting types, mounting hole Ø 3.2 mm, 1.5 mm², CAGE CLAMP®, 1.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 867617

2-conductor terminal block, 7-pin, without push button, with mounting flanges, for screw and similar mounting types, mounting hole Ø 3.2 mm, 1.5 mm², CAGE CLAMP®, 1.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 666825

2-conductor terminal block with mounting flanges for screw and similar mounting types, mounting hole Ø 3.2 mm with mounting foot 209-123 also on TS 35 10-pin gray
Sales unit: 25 pieces
Lieske Part No.: 403856

2-conductor terminal block with mounting flanges for screw and similar mounting types, mounting hole Ø 3.2 mm with mounting foot 209-123 also on TS 35 12-pin gray
Sales unit: 25 pieces
Lieske Part No.: 259744

2-conductor terminal block, 2-pole, without push button, with locking feet, for sheet thickness 0.6 - 1.2 mm, mounting hole Ø 3.5 mm, 1.5 mm², CAGE CLAMP®, 1.50 mm², grey
Sales unit: 100 pieces
Lieske Part No.: 733606

Lieske Part No.: 967542

2-conductor terminal block, 12-pin, without push button, with locking feet, for sheet thickness 0.6 - 1.2 mm, mounting hole Ø 3.5 mm, 1.5 mm², CAGE CLAMP®, 1.50 mm², grey
Sales unit: 25 pieces
Lieske Part No.: 794758

4-conductor terminal block with mounting flanges for screw and similar mounting types, mounting hole Ø 3.2 mm with mounting foot 209-123 also on TS 35 8-pin gray
Sales unit: 50 pieces
Lieske Part No.: 571447

4-conductor terminal block with mounting flanges for screw and similar mounting types, mounting hole Ø 3.2 mm with mounting foot 209-123 also on TS 35 10-pin gray
Sales unit: 25 pieces
Lieske Part No.: 999492

4-conductor terminal block, 6-pin, without push button, with locking feet, for sheet thickness 0.6 - 1.2 mm, mounting hole Ø 3.5 mm, 1.5 mm², CAGE CLAMP®, 1.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 160244

2-conductor terminal with mounting flange for screw and similar mounting types, mounting hole Ø 3.2 mm with mounting foot 209-123 also on TS 35 grey
Lieske Part No.: 636344

2-conductor terminal with mounting flange for screw and similar mounting types, mounting hole Ø 3.2 mm with mounting foot 209-123 also on TS 35 light grey
Sales unit: 50 pieces
Lieske Part No.: 579235

2-conductor terminal with mounting flange for screw and similar mounting types, mounting hole Ø 3.2 mm with mounting foot 209-123 also on TS 35 blue
Sales unit: 50 pieces
Lieske Part No.: 100642

2-conductor terminal with mounting flange for screw and similar mounting types, mounting hole Ø 3.2 mm with mounting foot 209-123 also on TS 35 orange
Sales unit: 50 pieces
Lieske Part No.: 125445

2-conductor terminal with mounting flange for screw and similar mounting types, mounting hole Ø 3.2 mm with mounting foot 209-123 also on TS 35 green-yellow
Sales unit: 50 pieces
Lieske Part No.: 471419

2-conductor terminal with locking foot for sheet thickness 0.6 - 1.2 mm, mounting hole Ø 3.5 mm also on aluminum rail 210-154 or with mounting foot 209-120 on TS 35 gray
Sales unit: 50 pieces
Lieske Part No.: 307854

2-conductor terminal with locking foot for sheet thickness 0.6 - 1.2 mm, mounting hole Ø 3.5 mm also on aluminum rail 210-154 or with mounting foot 209-120 on TS 35 light gray
Sales unit: 50 pieces
Lieske Part No.: 1963808

2-conductor terminal, without pusher, with locking foot, for sheet thickness 0.6 - 1.2 mm, mounting hole Ø 3.5 mm, can be bridged with cross and box jumpers, CAGE CLAMP®, 1.50 mm², blue
Sales unit: 50 pieces
Lieske Part No.: 1963809

2-conductor terminal with locking foot for sheet thickness 0.6 - 1.2 mm, mounting hole Ø 3.5 mm also on aluminum rail 210-154 or with mounting foot 209-120 on TS 35 orange
Sales unit: 50 pieces
Lieske Part No.: 1963810

2-conductor terminal, without pusher, with locking foot, for sheet thickness 0.6 - 1.2 mm, mounting hole Ø 3.5 mm, 1.5 mm², CAGE CLAMP®, 1.50 mm², green-yellow
Sales unit: 50 pieces
Lieske Part No.: 1963811

Space-saving 2-conductor end terminal without side protruding locking foot for terminal blocks with locking feet gray
Sales unit: 50 pieces
Lieske Part No.: 548437

Space-saving 2-conductor end terminal, without push button, without side-projecting locking foot, for terminal blocks with locking feet, bridgeable with cross and box jumpers, CAGE CLAMP®, 1.50 mm², light grey
Sales unit: 50 pieces
Lieske Part No.: 1963812

Space-saving 2-conductor end terminal, without push button, without side protruding locking foot, for terminal blocks with locking feet, bridgeable with cross and box jumpers, CAGE CLAMP®, 1.50 mm², blue
Sales unit: 50 pieces
Lieske Part No.: 1232473

Space-saving 2-conductor end terminal, without push button, without side protruding snap-on foot, for terminal blocks with snap-on feet, bridgeable with cross and box jumpers, CAGE CLAMP®, 1.50 mm², orange
Sales unit: 50 pieces
Lieske Part No.: 1963813

Space-saving 2-conductor end terminal without side protruding locking foot for terminal blocks with locking feet green-yellow
Sales unit: 50 pieces
Lieske Part No.: 1963814

4-conductor terminal with mounting flange for screw and similar mounting types, mounting hole Ø 3.2 mm with mounting foot 209-123 also on TS 35 grey
Sales unit: 50 pieces
Lieske Part No.: 192905

4-conductor terminal, without push button, with mounting flange, for screw and similar mounting types, mounting hole Ø 3.2 mm, can be bridged with cross and box jumpers, CAGE CLAMP®, 1.50 mm², light grey
Sales unit: 50 pieces
Lieske Part No.: 352506

4-conductor terminal with mounting flange for screw and similar mounting types, mounting hole Ø 3.2 mm with mounting foot 209-123 also on TS 35 blue
Sales unit: 50 pieces
Lieske Part No.: 213373

4-conductor terminal with mounting flange for screw and similar mounting types, mounting hole Ø 3.2 mm with mounting foot 209-123 also on TS 35 orange
Sales unit: 50 pieces
Lieske Part No.: 1963932

4-conductor terminal with mounting flange for screw and similar mounting types, mounting hole Ø 3.2 mm with mounting foot 209-123 also on TS 35 green-yellow
Sales unit: 50 pieces
Lieske Part No.: 587889

4-conductor terminal with locking foot for sheet thickness 0.6 - 1.2 mm, mounting hole Ø 3.5 mm also on aluminum rail 210-154 or with mounting foot 209-120 on TS 35 gray
Sales unit: 50 pieces
Lieske Part No.: 808760

4-conductor terminal, without pusher, with locking foot, for sheet thickness 0.6 - 1.2 mm, mounting hole Ø 3.5 mm, can be bridged with cross and box jumpers, CAGE CLAMP®, 1.50 mm², light grey
Sales unit: 50 pieces
Lieske Part No.: 603874

4-conductor terminal, without push button, with locking foot, for sheet thickness 0.6 - 1.2 mm, mounting hole Ø 3.5 mm, can be bridged with cross and box jumpers, CAGE CLAMP®, 1.50 mm², orange
Sales unit: 50 pieces
Lieske Part No.: 1963815

Space-saving 4-conductor end terminal, without push button, without side protruding snap-on foot, for terminal blocks with snap-on feet, bridgeable with cross and box jumpers, CAGE CLAMP®, 1.50 mm², grey
Sales unit: 50 pieces
Lieske Part No.: 1963816

Space-saving 4-conductor end terminal, without push button, without side-projecting snap-on foot, for terminal blocks with snap-on feet, bridgeable with cross and box jumpers, CAGE CLAMP®, 1.50 mm², light grey
Sales unit: 50 pieces
Lieske Part No.: 1963817

Space-saving 4-conductor end terminal, without push button, without side protruding locking foot, for terminal blocks with locking feet, bridgeable with cross and box jumpers, CAGE CLAMP®, 1.50 mm², blue
Sales unit: 50 pieces
Lieske Part No.: 1963818

Space-saving 4-conductor end terminal, without push button, without side protruding locking foot, for terminal blocks with locking feet, bridgeable with cross and box jumpers, CAGE CLAMP®, 1.50 mm², orange
Sales unit: 50 pieces
Lieske Part No.: 1963779

4-conductor end terminal, without push button, without side protruding locking foot, for terminal blocks with locking feet, 1.5 mm², CAGE CLAMP®, 1.50 mm², green-yellow
Sales unit: 50 pieces
Lieske Part No.: 1963780

End plate, with mounting flange, grey
Sales unit: 50 pieces
Lieske Part No.: 849476

End plate, with locking foot, grey
Sales unit: 50 pieces
Lieske Part No.: 529190

Insert bridge insulated 2-way reduces the connectable cross-section to 1 sqmm grey
Lieske Part No.: 109450

Test plug module, with latches, can be connected in series, for 2-wire terminals, for series 260, grey
Sales unit: 25 pieces
Lieske Part No.: 1963781

Test plug module, with latches, can be connected in series, for 4-conductor terminals, for series 260, grey
Sales unit: 25 pieces
Lieske Part No.: 1963782

2-conductor terminal block with mounting flanges for screw and similar mounting types, mounting hole Ø 3.2 mm with mounting foot 209-123 also on TS 35 for 10 DA
Sales unit: 25 pieces
Lieske Part No.: 658710