Installation Material

plus marker type PS-21 in yellow with black print O. These markers are suitable for cable outer diameters of 11.0 to 15.5mm and cable cross-sections of 35.0mm². The material of the cable markers is POM. One packaging unit contains
Lieske Part No.: 451042

plus marker type PS-21 in yellow with black imprint P. These markers are suitable for cable outer diameters of 11.0 to 15.5mm and cable cross-sections of 35.0mm². The material of the cable markers is POM. One packaging unit contains
Lieske Part No.: 589114

plus marker type PS-21 in yellow with black print Q. These markers are suitable for cable outer diameters of 11.0 to 15.5mm and cable cross-sections of 35.0mm². The material of the cable markers is POM. One packaging unit contains
Lieske Part No.: 723421

plus marker type PS-21 in yellow with black R print. These markers are suitable for cable outer diameters of 11.0 to 15.5mm and cable cross-sections of 35.0mm². The material of the cable markers is POM. One packaging unit contains
Lieske Part No.: 362427

plus marker type PS-21 in yellow with black print S. These markers are suitable for cable outer diameters of 11.0 to 15.5mm and cable cross-sections of 35.0mm². The material of the cable markers is POM. One packaging unit contains
Lieske Part No.: 257113

plus marker type PS-21 in yellow with black print T. These markers are suitable for cable outer diameters of 11.0 to 15.5mm and cable cross-sections of 35.0mm². The material of the cable markers is POM. One packaging unit contains
Lieske Part No.: 325443

plus marker type PS-21 in yellow with black U print. These markers are suitable for cable outer diameters of 11.0 to 15.5mm and cable cross-sections of 35.0mm². The material of the cable markers is POM. One packaging unit contains
Lieske Part No.: 300811

plus marker type PS-21 in yellow with black imprint V. These markers are suitable for cable outer diameters of 11.0 to 15.5mm and cable cross-sections of 35.0mm². The material of the cable markers is POM. One packaging unit contains
Lieske Part No.: 521131

plus marker type PS-21 in yellow with black print W. These markers are suitable for cable outer diameters of 11.0 to 15.5mm and cable cross-sections of 35.0mm². The material of the cable markers is POM. One packaging unit contains
Lieske Part No.: 358390

plus marker type PS-21 in yellow with black print X. These markers are suitable for cable outer diameters of 11.0 to 15.5mm and cable cross-sections of 35.0mm². The material of the cable markers is POM. One packaging unit contains
Lieske Part No.: 468027

plus marker type PS-21 in yellow with black print Y. These markers are suitable for cable outer diameters of 11.0 to 15.5mm and cable cross-sections of 35.0mm². The material of the cable markers is POM. One packaging unit contains
Lieske Part No.: 539401

plus marker type PS-21 in yellow with black Z print. These markers are suitable for cable outer diameters of 11.0 to 15.5mm and cable cross-sections of 35.0mm². The material of the cable markers is POM. One packaging unit contains
Lieske Part No.: 355453

plus marker type PS-06 in white without print. These markers are suitable for cable outer diameters of 2.6 to 3.5mm and cable cross-sections of 1 to 1.5mm². The material of the cable markers is POM. The color of the support rods is red and k
Lieske Part No.: 838875

plus marker type PS-15 in blue without print. These markers are suitable for cable outer diameters of 5.8 to 8.5mm and cable cross-sections of 10.0 to 16.0mm². The material of the cable markers is POM. One packaging unit contains 50
Lieske Part No.: 374164

plus marker type PS-15 in green without print. These markers are suitable for cable outer diameters of 5.8 to 8.5mm and cable cross-sections of 10.0 to 16.0mm². The material of the cable markers is POM. One packaging unit contains 50
Lieske Part No.: 374163

plus marker type PS-15 in yellow without print. These markers are suitable for cable outer diameters of 5.8 to 8.5mm and cable cross-sections of 10.0 to 16.0mm². The material of the cable markers is POM. One packaging unit contains 50
Lieske Part No.: 374162

plus marker type PS-15 in violet without print. These markers are suitable for cable outer diameters of 5.8 to 8.5mm and cable cross-sections of 10.0 to 16.0mm². The material of the cable markers is POM. One packaging unit contains
Lieske Part No.: 374152

plus marker type PS-15 in black without print. These markers are suitable for cable outer diameters of 5.8 to 8.5mm and cable cross-sections of 10.0 to 16.0mm². The material of the cable markers is POM. One packaging unit contains
Lieske Part No.: 374146

Type T1 made of POM in yellow with black print -. For cable outer diameter 2.2 to 3.8mm. For cable cross-section 0.5 to 2.5mm². With this marking system you can identify the conductors and cables before or after wiring by simply clipping them on.
Sales unit: 300 pieces
Lieske Part No.: 1261870

Type T1 made of POM in yellow with black print +. For cable outer diameter 2.2 to 3.8mm. For cable cross-section 0.5 to 2.5mm². With this marking system you can mark the conductors and cables before or after wiring by simply clipping them on.
Sales unit: 300 pieces
Lieske Part No.: 1261627

Type T2 made of POM in yellow with black print 0. For cable outer diameter 3.8 to 5.3mm. For cable cross-section 2.5 to 6.0mm². With this marking system you can mark the conductors and cables before or after wiring by simply clipping them on.
Sales unit: 800 pieces
Lieske Part No.: 1332645

Type T2 made of POM in yellow with black print 1. For cable outer diameter 3.8 to 5.3mm. For cable cross-section 2.5 to 6.0mm². With this marking system you can identify the conductors and cables before or after wiring by simply clipping them on.
Sales unit: 800 pieces
Lieske Part No.: 1332628

Type T2 made of POM in yellow with black print 2. For cable outer diameter 3.8 to 5.3mm. For cable cross-section 2.5 to 6.0mm². With this marking system you can identify the conductors and cables before or after wiring by simply clipping them on.
Sales unit: 800 pieces
Lieske Part No.: 1332627

Type T2 made of POM in yellow with black print 3. For cable outer diameter 3.8 to 5.3mm. For cable cross-section 2.5 to 6.0mm². With this marking system you can mark the conductors and cables before or after wiring by simply clipping them on.
Sales unit: 800 pieces
Lieske Part No.: 1332626

Type T2 made of POM in yellow with black print 4. For cable outer diameter 3.8 to 5.3mm. For cable cross-section 2.5 to 6.0mm². With this marking system you can mark the conductors and cables before or after wiring by simply clipping them on.
Sales unit: 800 pieces
Lieske Part No.: 1332625

Type T2 made of POM in yellow with black print 5. For cable outer diameter 3.8 to 5.3mm. For cable cross-section 2.5 to 6.0mm². With this marking system you can mark the conductors and cables before or after wiring by simply clipping them on.
Sales unit: 800 pieces
Lieske Part No.: 1332624

Type T2 made of POM in yellow with black print 6. For cable outer diameter 3.8 to 5.3mm. For cable cross-section 2.5 to 6.0mm². With this marking system you can mark the conductors and cables before or after wiring by simply clipping them on.
Sales unit: 800 pieces
Lieske Part No.: 1332623

Type T2 made of POM in yellow with black print 7. For cable outer diameter 3.8 to 5.3mm. For cable cross-section 2.5 to 6.0mm². With this marking system you can identify the conductors and cables before or after wiring by simply clipping them on.
Sales unit: 800 pieces
Lieske Part No.: 1332622

Type T2 made of POM in yellow with black print 8. For cable outer diameter 3.8 to 5.3mm. For cable cross-section 2.5 to 6.0mm². With this marking system you can identify the conductors and cables before or after wiring by simply clipping them on.
Sales unit: 800 pieces
Lieske Part No.: 1332621

Type T2 made of POM in yellow with black print 9. For cable outer diameter 3.8 to 5.3mm. For cable cross-section 2.5 to 6.0mm². With this marking system you can identify the conductors and cables before or after wiring by simply clipping them on.
Sales unit: 800 pieces
Lieske Part No.: 1332620

Marking system PLIOGRIP type T2 made of POM in blue with white print - (International color code). For cable outer diameter 3.8 to 5.3mm. For cable cross-section 2.5 to 6.0mm². With this marking system you can mark the conductors and cables,
Sales unit: 200 pieces
Lieske Part No.: 1332619

Type T2 made of POM in red with white print + (international color code). For cable outer diameter 3.8 to 5.3mm. For cable cross-section 2.5 to 6.0mm². With this marking system you can mark the conductors and cables before or after wiring.
Sales unit: 200 pieces
Lieske Part No.: 1332618

PLIOSCRIB type 14-1177 label according to UL94 V0. The delivery includes 20 carriers with 48 labels each. These labels are used with the PLIOGRAPH carriers 18mm from page B5/2-01. For labeling use
Lieske Part No.: 458514

Hot stamping ribbon M1P-RC03BK, color black, for PLIOSCRIB M-1Pro IV. One packaging unit contains 2x 100m.
Lieske Part No.: 506682

Shrink sleeve Pliofine SAM 1.6
Sales unit: 150 meters
Lieske Part No.: 458980

Shrink sleeve Pliofine SAM 1.6 (1.22m)
Lieske Part No.: 458986

Shrink sleeve Pliofine SAM 6.4
Sales unit: 75 meters
Lieske Part No.: 458995

Shrink sleeve Pliofine SAM 9.5
Sales unit: 75 meters
Lieske Part No.: 459021

Shrink sleeve Pliofine SAM 12.7
Sales unit: 50 meters
Lieske Part No.: 459047

Shrink sleeve Pliofine SAM 16.0
Sales unit: 50 meters
Lieske Part No.: 459050

Shrink wrap Pliofine SAM 32.0 (1.22m)
Lieske Part No.: 459060

Shrink tube Pliofine SAM 1.6 Box (17m)
Lieske Part No.: 459073

Shrink tube Pliofine SAM 2.4 Box (15m)
Lieske Part No.: 459078

Shrink tube Pliofine SAM 3.2 Box (15m)
Lieske Part No.: 459083

Shrink tube Pliofine SAM 4.8 Box (12m)
Lieske Part No.: 459123

Shrink tube Pliofine SAM 6.4 Box (12m)
Lieske Part No.: 459127

Shrink tube Pliofine SAM 9.5 Box (8m)
Lieske Part No.: 459156

Shrink tube Pliofine SAM 12.7 Box (8m)
Lieske Part No.: 459159

Shrink tube Pliofine SAM 16.0 Box (6m)
Lieske Part No.: 459174

Shrink tube Pliofine SAM 19.0 Box (5m)
Lieske Part No.: 459183