Installation Material

Beam screw clamp for mounting pipes and cables. Closed pipe holder at the bottom. Fastened to steel beams by screwing.
Sales unit: 50 pieces
Lieske Part No.: 681961

Beam screw clamp for mounting pipes and cables. Closed pipe holder at the bottom. Fastened to steel beams by screwing.
Sales unit: 50 pieces
Lieske Part No.: 681964

Beam clamp for mounting pipes. Closed pipe holder at the bottom. Fastened to steel beams by hammering.
Sales unit: 50 pieces
Lieske Part No.: 2121901

Beam clamp for mounting pipes. Closed pipe holder at the bottom. Fastened to steel beams by hammering.
Sales unit: 50 pieces
Lieske Part No.: 1103519

Trägerklammer zum Montieren von Rohren. Geschlossene Rohraufnahme unten. Befestigung an Stahträgern durch Aufschlagen.
Sales unit: 50 pieces
Lieske Part No.: 840352

Beam clamp for mounting pipes. Closed pipe holder at the bottom. Fastened to steel beams by hammering.
Sales unit: 50 pieces
Lieske Part No.: 681965

Beam clamp for mounting pipes. Closed pipe holder at the bottom. Fastened to steel beams by hammering.
Sales unit: 50 pieces
Lieske Part No.: 2128774

The B9/T... damp room cable junction box: consists of two different halogen-free plastic components, 2 additional entries in the floor with a push-through membrane
(for cable diameters up to 15 mm)
with a push-through membrane (for cable diameters up to 15 mm) in the floor area.
When using the cable glands (additional strain relief), it is not necessary to remove the membrane (time saving). Protection class IP 67 with a push-through membrane and with a cable gland without removing the push-through membrane.
Nominal voltage 400 V, nominal cross section 4 ÷ 6 mm².
The cover is screwed on with 4 pre-assembled, captive quick-release cover fasteners (180°) and can be sealed.
The fastening holes are also injected with a soft plastic component, for screw diameters 5 mm (distance 75 mm). Clear internal dimensions 98x98x40
Sales unit: 5 pieces
Lieske Part No.: 969731

Device screw for mounting devices in flush-mounted or hollow-wall device boxes.
Sales unit: 50 pieces
Lieske Part No.: 1101515

Device screw for mounting devices in flush-mounted or hollow-wall device boxes.
Sales unit: 50 pieces
Lieske Part No.: 1101516

Device screw for mounting devices in flush-mounted or hollow-wall device boxes.
Sales unit: 50 pieces
Lieske Part No.: 1101517

Storage box with device screws Ø 3.2 mm in 15, 25 and 40 mm length, for mounting devices in flush-mounted or hollow wall device boxes.
Lieske Part No.: 1101518

Closed entry nipple with penetration membrane for cable diameters of 7-13 mm. Ideal for easy cable and line entry in housings or through thin-walled sheets.
Required hole diameter 18.5-19 mm, wall thickness max. 1.8 mm.
Sales unit: 100 pieces
Lieske Part No.: 440400

The plug-in nipple can be adapted to the respective cable diameter by cutting it off step by step.
Lieske Part No.: 1349907

The plug-in nipple can be adapted to the respective cable diameter by cutting it off step by step.
Sales unit: 100 pieces
Lieske Part No.: 1044248

The plug-in nipple can be adapted to the respective cable diameter by cutting it off step by step.
Sales unit: 100 pieces
Lieske Part No.: 1021864

The plug-in nipple can be adapted to the respective cable diameter by cutting it off step by step.
Sales unit: 100 pieces
Lieske Part No.: 1021865

The plug-in nipple can be adapted to the respective cable diameter by cutting it off step by step.
Sales unit: 100 pieces
Lieske Part No.: 731725

The plug-in nipple can be adapted to the respective cable diameter by cutting it off step by step.
Sales unit: 100 pieces
Lieske Part No.: 923284

The plug-in nipple can be adapted to the respective cable diameter by cutting it off step by step.
Sales unit: 50 pieces
Lieske Part No.: 948671

Flat cable entry in grommet design, with PG connection thread according to DIN 40430, protection class IP31, with pre-assembled nozzle sealing ring 107/F.
Sales unit: 50 pieces
Lieske Part No.: 282202

Flat cable entry in grommet design, with PG connection thread according to DIN 40430, protection class IP31, with pre-assembled nozzle sealing ring 107/F.
Sales unit: 15 pieces
Lieske Part No.: 1316071

Flat cable entry in grommet design, with PG connection thread according to DIN 40430, protection class IP31, with pre-assembled nozzle sealing ring 107/F.
Sales unit: 25 pieces
Lieske Part No.: 830884

Flat cable entry in grommet design, with PG connection thread according to DIN 40430, protection class IP31, with pre-assembled nozzle sealing ring 107/F.
Sales unit: 25 pieces
Lieske Part No.: 1316070

Flat cable entry in grommet design, with PG connection thread according to DIN 40430, protection class IP31, with pre-assembled nozzle sealing ring 107/F.
Sales unit: 25 pieces
Lieske Part No.: 281893

Flat cable entry in grommet design, with PG connection thread according to DIN 40430, protection class IP31, with pre-assembled nozzle sealing ring 107/F.
Sales unit: 25 pieces
Lieske Part No.: 1316069

Flat cable entry in grommet design, with PG connection thread according to DIN 40430, protection class IP31, with pre-assembled nozzle sealing ring 107/F.
Sales unit: 25 pieces
Lieske Part No.: 264763

Flat cable entry in grommet design, with PG connection thread according to DIN 40430, protection class IP31, with pre-assembled nozzle sealing ring 107/F.
Sales unit: 25 pieces
Lieske Part No.: 561629

Flat cable entry in grommet design, with PG connection thread according to DIN 40430, protection class IP31, with pre-assembled nozzle sealing ring 107/F.
Sales unit: 25 pieces
Lieske Part No.: 376589

Flat cable entry in grommet design, with PG connection thread according to DIN 40430, protection class IP31, with pre-assembled nozzle sealing ring 107/F.
Sales unit: 25 pieces
Lieske Part No.: 440511

Flat cable entry in grommet design, with metric connection thread according to IEC 432, protection class IP 31, with pre-assembled nozzle sealing ring 107/F.
Sales unit: 50 pieces
Lieske Part No.: 501861

Flat cable entry in grommet design, with metric connection thread according to IEC 432, protection class IP31, with pre-assembled nozzle sealing ring 107/F.
Sales unit: 25 pieces
Lieske Part No.: 632762

Flat cable entry in grommet design, with metric connection thread according to IEC 432, protection class IP31, with pre-assembled nozzle sealing ring 107/F.
Sales unit: 25 pieces
Lieske Part No.: 939141

Flat cable entry in grommet design, with metric connection thread according to IEC 432, protection class IP31, with pre-assembled nozzle sealing ring 107/F.
Sales unit: 25 pieces
Lieske Part No.: 723693

Flat cable entry in grommet design, with metric connection thread according to IEC 432, protection class IP31, with pre-assembled nozzle sealing ring 107/F.
Sales unit: 25 pieces
Lieske Part No.: 209538

Flat cable entry in grommet design, with metric connection thread according to IEC 432, protection class IP31, with pre-assembled nozzle sealing ring 107/F.
Sales unit: 25 pieces
Lieske Part No.: 816659

Flat cable entry in grommet design, with metric connection thread according to IEC 432, protection class IP31, with pre-assembled nozzle sealing ring 107/F.
Sales unit: 25 pieces
Lieske Part No.: 972670

Flat cable entry in grommet design, with metric connection thread according to IEC 432, protection class IP31, with pre-assembled nozzle sealing ring 107/F.
Sales unit: 25 pieces
Lieske Part No.: 773054

Flat cable entry in grommet design, with metric connection thread according to IEC 432, protection class IP31, with pre-assembled nozzle sealing ring 107/F.
Sales unit: 25 pieces
Lieske Part No.: 612141

Flat cable entry in grommet design, with metric connection thread according to IEC 432, protection class IP31, with pre-assembled nozzle sealing ring 107/F.
Sales unit: 15 pieces
Lieske Part No.: 425015

Flat cable entry in grommet design, with metric connection thread according to IEC 432, protection class IP31, with pre-assembled nozzle sealing ring 107/F.
Sales unit: 15 pieces
Lieske Part No.: 773924

Flat cable entry in grommet design, with metric connection thread according to IEC 432, protection class IP31, with pre-assembled nozzle sealing ring 107/F.
Sales unit: 15 pieces
Lieske Part No.: 161165

Flat cable entry in grommet design, with metric connection thread according to IEC 432, protection class IP31, with pre-assembled nozzle sealing ring 107/F.
Sales unit: 15 pieces
Lieske Part No.: 134916

Flat cable entry in grommet design, with metric connection thread according to IEC 432, protection class IP31, with pre-assembled nozzle sealing ring 107/F.
Sales unit: 15 pieces
Lieske Part No.: 494842

Flat cable entry in grommet design, with metric connection thread according to IEC 432, protection class IP31, with pre-assembled nozzle sealing ring 107/F.
Sales unit: 15 pieces
Lieske Part No.: 411230

Pressure screw with centrally acting crossbar strain relief, stainless steel screws.
With strain relief and bending protection.

• Prices according to DEL quotation.

Sales unit: 25 pieces
Lieske Part No.: 143621

Cable gland with metric connection thread in cap nut design, for cable junction boxes, housings, distribution cabinets in the private and industrial sector. With strain relief and integrated sealing lip, tested according to DIN EN 62444. Protection class IP68. Can be used from -20°C to +65°C.
Sales unit: 50 pieces
Lieske Part No.: 1642373

Cable gland with metric connection thread in cap nut design, for cable junction boxes, housings, distribution cabinets in the private and industrial sector. With strain relief and integrated sealing lip, tested according to DIN EN 62444. Protection class IP68. Can be used from -20°C to +65°C.
Sales unit: 50 pieces
Lieske Part No.: 1330204

Cable gland with metric connection thread in cap nut design, for cable junction boxes, housings, distribution cabinets in the private and industrial sector. With strain relief and integrated sealing lip, tested according to DIN EN 62444. Protection class IP68. Can be used from -20°C to +65°C.
Sales unit: 25 pieces
Lieske Part No.: 774049

Cable gland with metric connection thread in cap nut design, for cable junction boxes, housings, distribution cabinets in the private and industrial sector. With strain relief and integrated sealing lip, tested according to DIN EN 62444. Protection class IP68. Can be used from -20°C to +65°C.
Sales unit: 25 pieces
Lieske Part No.: 133673