Products of Klauke
Categories with products from Klauke
- Light & Sound ➤ Illuminants ➤ Bulbs ➤ Glow lamps and dwarf ( 1 )
- Electrics ➤ Industrial Material ➤ Industrial Connectors ➤ Small connector ( 1 )
- Electrics ➤ Installation ➤ Isolation / Identification ➤ Servicesprays ( 2 )
- Electrics ➤ Installation ➤ Terminals ➤ Shield-Kon ( 19 )
- Electronics ➤ Measurement ➤ Measuring Instruments ➤ Spirit Levels ( 3 )
- IT-Equipment ➤ Networks ➤ Junction boxes ➤ Cat6 ( 1 )
- IT-Equipment ➤ Networks ➤ Switches ➤ Miscellaneous ( 1 )
- IT-Equipment ➤ Office Equipment ➤ POS Consumables ➤ Wristbands ( 4 )
- Technology ➤ Tools ➤ Cable Pulling Systems ( 38 )
- Technology ➤ Tools ➤ Drills ( 1 )
- Technology ➤ Tools ➤ Knifes ( 14 )
- Technology ➤ Tools ➤ Miscellaneous ( 510 )
- Technology ➤ Tools ➤ Pliers ➤ Pliers Kits ( 2 )
- Technology ➤ Tools ➤ Power Tool Accessories ➤ Multi-Cutter Accessories ( 1 )
- Technology ➤ Tools ➤ Power Tools ➤ Pressure Washers ( 11 )
- Technology ➤ Tools ➤ Punches ( 138 )
- Technology ➤ Tools ➤ Safety & Workwear Equipment ➤ Workwear ( 3 )
- Technology ➤ Tools ➤ Saws ( 3 )
- Technology ➤ Tools ➤ Screwdrivers ( 25 )
- Technology ➤ Tools ➤ Tool Storage ➤ Toolboxes ( 5 )
- Technology ➤ Tools ➤ Wrenches ( 11 )
 |
 Klauke 51300430Klauke 51300430 draw bolt for hydraulic actuation D9.5x71mmTo increase the service life, we recommend greasing the tension screws with Greenlee assembly paste no. 50115472. Dimensions in diameter x length, tolerance deviations are reserved. d: 9.5 x 71 mm Lieske Part No.: 693784 Mfg Part No: 51300430 |
13,66 EUR 13,98 EUR
 plus delivery charges
Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline
|
 |
Klauke 51319760 51319760Klauke 51319760 Slug-Buster stamp 47mm PG36 max. steel (ST37) 3mm For quick, clean, effortless and burr-free punching. Punch waste pieces are split and can be easily removed. Suitable for sheet steel (St37), plastic and aluminum. Manual and hydraulic operation. Lieske Part No.: 671448 Mfg Part No: 51319760 |
121,97 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
KLAUKE 51320090 51320090KLAUKE 51320090 Matrize 47,0mm Matrize 47,0 mm Verkaufseinheit: 1 ST. Lieske Part No.: 512127 Mfg Part No: 51320090 |
62,07 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke 514RLDKlauke 514RLD compression connector 400 sqmm , E-copper Pipe dimensions according to DIN 46267 Part 1. With code number for clear tool assignment. For copper medium-voltage cable connections 10-30 kV. With bevelled edges for reduced winding effort during ... Lieske Part No.: 549601 Mfg Part No: 514RLD |
-99% 59,41 EUR 4.218,51 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke 51R10Klauke 51R10 angle cable lug , 185 sq mm 22 mm 90 degrees For multi-wire round conductors, e.g. VDE 0295 Class 2. For rounded multi-wire sector conductors. Flat contact surface thanks to special angle stamping technology. Optimum material and pressing ... Lieske Part No.: 206434 Mfg Part No: 51R10 |
-87% 75,09 EUR 566,60 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
KLAUKE 51R1045KLAUKE 51R1045 185 sq mm cable lug angle 45 degrees, 22 mm For multi-wire round conductors, e.g. VDE 0295 Class 2. For rounded multi-wire sector conductors. Flat contact surface thanks to special angle stamping technology. Optimum material and pressing ... Lieske Part No.: 312089 Mfg Part No: 51R1045 |
-86% 85,78 EUR 633,91 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke 51R12Klauke 51R12 tubular cable lug 90° 185qmm M12 E-Cu galvanized For multi-wire round conductors, e.g. VDE 0295 Class 2. For rounded multi-wire sector conductors. Flat contact surface thanks to special angle stamping technology. Optimum material and pressing ... Lieske Part No.: 611268 Mfg Part No: 51R12 |
-86% 74,88 EUR 551,77 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke 51R1245Klauke 51R1245 cable lug angle , 185 sq. mm 45 ° 22 mm For multi-wire round conductors, e.g. VDE 0295 Class 2. For rounded multi-wire sector conductors. Flat contact surface thanks to special angle stamping technology. Optimum material and pressing ... Lieske Part No.: 586894 Mfg Part No: 51R1245 |
-86% 85,81 EUR 634,12 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke 51R14 51R14Klauke 51R14 tubular cable lug 90° 185qmm M14 E-Cu galvanized For multi-wire round conductors, e.g. VDE 0295 Class 2. For rounded multi-wire sector conductors. Flat contact surface thanks to special angle stamping technology. Optimum material and pressing ... Lieske Part No.: 624268 Mfg Part No: 51R14 |
-87% 74,67 EUR 562,29 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke 51R16Klauke 51R16 angle cable lug , 185 sq mm 22 mm 90 degrees For multi-wire round conductors, e.g. VDE 0295 Class 2. For rounded multi-wire sector conductors. Flat contact surface thanks to special angle stamping technology. Optimum material and pressing ... Lieske Part No.: 530107 Mfg Part No: 51R16 |
-87% 73,31 EUR 552,02 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
KLAUKE 51R1645KLAUKE 51R1645 185 sq mm cable lug angle 45 degrees, 22 mm For multi-wire round conductors, e.g. VDE 0295 Class 2. For rounded multi-wire sector conductors. Flat contact surface thanks to special angle stamping technology. Optimum material and pressing ... Lieske Part No.: 175342 Mfg Part No: 51R1645 |
-86% 83,79 EUR 618,53 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
KLAUKE 51R20KLAUKE 51R20 185 sq mm cable lug angle 90 degrees, 24 mm For multi-wire round conductors, e.g. VDE 0295 Class 2. For rounded multi-wire sector conductors. Flat contact surface thanks to special angle stamping technology. Optimum material and pressing ... Lieske Part No.: 894116 Mfg Part No: 51R20 |
-87% 74,91 EUR 564,77 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
KLAUKE 51R2045KLAUKE 51R2045 tube cable lug 45 ° 185qmm, M20 E-Cu galv. Galv. For multi-wire round conductors, e.g. VDE 0295 Class 2. For rounded multi-wire sector conductors. Flat contact surface thanks to special angle stamping technology. Optimum material and pressing ... Lieske Part No.: 392039 Mfg Part No: 51R2045 |
-87% 85,57 EUR 676,92 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke 52020113Klauke 52020113 replacement screw , To increase the service life, we recommend greasing the tension screws with Greenlee assembly paste no. 50115472. Dimensions in diameter x length, tolerance deviations are reserved. 9.5 x 88 mm Lieske Part No.: 155209 Mfg Part No: 52020113 |
78,31 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
KLAUKE 52033816Klauke 52033816 special shape hole punch 36x52mm for heavy connectors Type: 52033816 Sales unit: 1 pc Lieske Part No.: 391986 Mfg Part No: 52033816 |
929,81 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke 52033817Klauke 52033817 Punch for heavy connectors The rectangular punches for heavy connectors are equipped with a drilling template integrated into the die for drilling the 4 fastening holes. Suitable for sheet steel (St37) up to 3.0 mm thick and ... Lieske Part No.: 747051 Mfg Part No: 52033817 |
1.038,51 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke 52033818Klauke 52033818 special shape punches, 36x86mm f.schwere Connectors The rectangular punches for heavy connectors are equipped with a drilling template integrated into the die for drilling the 4 fastening holes. Suitable for sheet steel (St37) up to 3.0 mm thick and ... Lieske Part No.: 133493 Mfg Part No: 52033818 |
1.168,20 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
KLAUKE 52033819KLAUKE 52033819 special shape punches, 36x91mm f.schwere Connectors The rectangular punches for heavy connectors are equipped with a drilling template integrated into the die for drilling the 4 fastening holes. Suitable for sheet steel (St37) up to 3.0 mm thick and ... Lieske Part No.: 198853 Mfg Part No: 52033819 |
1.188,99 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
KLAUKE 52033820Klauke 52033820 special shape hole punch 36x112mm for heavy connectors The rectangular punches for heavy connectors are equipped with a drilling template integrated into the die for drilling the 4 fastening holes. Suitable for sheet steel (St37) up to 3.0 mm thick and ... Lieske Part No.: 417032 Mfg Part No: 52033820 |
1.397,88 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
KLAUKE 52033832 52033832Klauke 52033832 special shape hole punch 46x112mm for heavy connectors The rectangular punches for heavy connectors are equipped with a drilling template integrated into the die for drilling the 4 fastening holes. Suitable for sheet steel (St37) up to 3.0 mm thick and ... Lieske Part No.: 1241700 Mfg Part No: 52033832 |
1.433,52 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
KLAUKE 52033836Klauke 52033836 draw bolt 26-112mm hydraulic For special shaped hole punches for heavy connectors. Lieske Part No.: 662386 Mfg Part No: 52033836 |
163,50 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
|
|
KLAUKE 52033839KLAUKE 52033839 countersink, f.Bi-metal hole saw Countersink for bi-metal hole saw 68mm. Lieske Part No.: 990116 Mfg Part No: 52033839 |
38,41 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke 52033843Klauke 52033843 Hand hydraulic punch, FLEX DRAW Sales Unit: 1 ST. Lieske Part No.: 148105 Mfg Part No: 52033843 |
1.017,91 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Klauke 52034233Klauke 52034233 hand Hydraulikstanzenset, including self-punch ISO 16 - 40 Type: 52034233 Sales unit: 1 pc Lieske Part No.: 981136 Mfg Part No: 52034233 |
1.209,54 EUR
plus delivery charges
Delivery time on requestinfo_outline
|