Klauke 1020 insulated round pin 0.5-1 mm² red pin D4 mm
|
37,95 EUR 39,55 EUR |
|||||||||||
|
( 45,16 EUR incl. VAT ) ≈ £31.76 | ≈ $41.71 plus delivery charges: 55,00 € |
|||||||||||
| Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline | |||||||||||
| Sales unit: 100 pieces | |||||||||||
| In Stock: >25 pieces | |||||||||||
| Lieske Part No.: | 681709 | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfg Part No: | 1020 | ||||||||||
| UPC/EAN: | 4012078000598 | ||||||||||
| Weight: | 0.188 kg | ||||||||||
| Type: | 1020 | ||||||||||
|
Graduated prices net
|
|||||||||||
Product information for Klauke 1020:
Cable connector for extra-fine wire conductors
The round pin connector type 1020 is designed for use with thin cables, particularly in areas where high precision is required for connections. The cross-section-dependent colour coding facilitates correct selection and use, thereby avoiding errors during installation. The red-marked insulating sleeve indicates the application range for conductor cross-sections of 0.5 to 1 mm², which is typical for applications in electrical installation, automation technology, or device cabling.
Insulating sleeve made of PVC
The PVC insulating sleeve provides reliable electrical insulation and protects the connector from mechanical damage. PVC is a proven plastic for electrical insulation, offering good heat resistance and chemical resistance. The sleeve fits the connector body and ensures a clean, secure connection that remains undamaged even with frequent handling.
Galvanically tinned brass body
The connector body is made of brass (CuZn), a copper-zinc alloy known for its mechanical strength and good conductivity. The galvanic tinning protects the metal body from oxidation and corrosion, extending the connector's service life and maintaining stable electrical conductivity over time. This is particularly important in environments with high humidity or frequent use.
Temperature resistance up to 70 °C
The maximum operating temperature of 70 °C makes the connector suitable for use in indoor environments and under normal ambient conditions. It is not intended for applications where elevated temperatures occur, such as near heating elements or in industrial environments with high thermal stress.
Use in electrical installation
The round pin connector type 1020 is frequently used in electrical installation, particularly for connecting thin cables in sockets, switches, device connections, or in the cabling of electronic components. The combination of brass, tinning, and PVC insulation ensures a reliable and long-lasting connection that meets the requirements of electrical engineering.
Compatibility and accessories
The connector is designed for conductor cross-sections of 0.5 to 1 mm² and fits into corresponding sockets or plug connectors. It is not compatible with other cross-section sizes, as the colour coding and mechanical fit are specifically matched to this range. Use with other connectors or sockets requires attention to cross-section specifications to ensure a secure connection.
Mounting and installation
Mounting is carried out by inserting the cable into the connector and then crimping or clamping, depending on the mounting tool used. The insulating sleeve remains intact and ensures safe electrical isolation. The connection is secure and resistant to mechanical stress after installation. It is recommended to use appropriate tools for mounting to ensure an optimal connection.
Operational safety and reliability
The connector provides a stable electrical connection suitable for continuous operation. The tinning and PVC insulation ensure high operational safety, particularly in environments with increased humidity or frequent use. The temperature resistance up to 70 °C allows use in a wide range of applications without impairing electrical or mechanical properties.
The item price shown refers to 100 pieces Klauke 1020
| General | |
| Cross section | 0,5-1 mm² |
| Plug diameter | 4 mm |
| Colour | Red |
| Material | CuZn |
| Surface coating | Galvanic tinned |
| Insulating sleeve | PVC |
| Temperature resistance | 70 °C |
Questions & answers
What is the delivery time of Klauke 1020 insulated round pin 0.5-1 mm² red pin D4 mm?
The article Klauke 1020 insulated round pin 0.5-1 mm² red pin D4 mm is currently in stock
According to our experience the article is ready for dispatch within 3 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Klauke 1020 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Klauke 1020 insulated round pin 0.5-1 mm² red pin D4 mm always at the best possible price. We can give you a discount of 2% on Klauke 1020 insulated round pin 0.5-1 mm² red pin D4 mm if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 10 pieces of Klauke 1020 insulated round pin 0.5-1 mm² red pin D4 mm we can offer you a price of 34,82 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.
How many units does the article contain?
Klauke 1020 insulated round pin 0.5-1 mm² red pin D4 mm is offered by us in a sales unit of 100 pieces If you need a larger quantity, you can contact us at any time. We will make a special offer for you



