JUNG FMASPF10UP radio actuator potential-free 1-channel
|
107,74 EUR 112,28 EUR |
|
|
( 128,21 EUR incl. VAT ) ≈ £91.47 | ≈ $121.42 plus delivery charges: 53,00 € |
|
| Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline | |
| In Stock: 5 pieces | |
| Lieske Part No.: | 876236 |
|---|---|
| Mfg Part No: | FMASPF10UP |
| UPC/EAN: | 4011377086845 |
| Weight: | 0.123 kg |
| Type: | FMASPF10UP |
Further Switch Electronics from JUNGFurther products in category Switch Electronics
All products of JUNG
Product information for JUNG FMASPF10UP:
New system function: fully encrypted radio transmission (AES-CCM) from eNet Server software version 2.0
Intended use
Switching of lighting
Operation with suitable eNet radio transmitters
Installation in device box according to EN 60670-1 in combination with a suitable cover
Installation in surface-mounted housing or installation adapter (item no. FM-EBG) for false ceilings
Product features
Operating mode switch for switching/touch actuator switching or parameterization via eNet server
Status feedback to radio transmitter
Scene operation possible
Output can be switched with Prog button
Status display with LED
Switching mode:
Switch-on telegram: Device switches on
Switch-off telegram: Device switches off
Touch mode:
The relay contact remains closed as long as switch-on or switch-off telegrams are received
The maximum switch-on time is 60 seconds Can be
set with eNet server:
Flashing function
Follow-up time
Switch-on/switch-off delay Normally
open or normally closed operation
Switch-off warning
Minimum switching repetition time
Operating locks
Permanently on, permanently off
Additional functions with eNet server:
Fully encrypted radio transmission (AES-CCM) from eNet server software version 2.0
Update of device software
Repeater function
Read error memory
Nominal voltage: AC 230 V ~, 50/60 Hz
Ambient temperature: ?25 ... +70 °C
Switching current at 35 °C
Ohmic: 16 A (AC1)
With switching current
Contact type: µ
Standby power: 0.5 W
Connected load at 35 °C
Incandescent lamps: 2300 W
HV halogen lamps: 2000 W
Electronic transformers: 1500 W
Inductive transformers: 1000 VA
HV LED lamps: typically 500 W
Compact fluorescent lamps: typically 500 W
Uncompensated fluorescent lamps: 920 VA
Capacitive load: 690 VA (560 µF)
Connection type: screw terminals
single-wire: 1 x 0.75 ... 4 mm2
fine-wire with wire end ferrule: 1 x 0.75 ... 2.5 mm2
Dimensions (Ø x H): 53 x 28 mm
Radio frequency: 868.0 ... 868.6 MHz
Transmission power: max. 20 mW
Transmission range in free field: typ. 100 m
Recipient category: 2
Intended use
Switching of lighting
Operation with suitable eNet radio transmitters
Installation in device box according to EN 60670-1 in combination with a suitable cover
Installation in surface-mounted housing or installation adapter (item no. FM-EBG) for false ceilings
Product features
Operating mode switch for switching/touch actuator switching or parameterization via eNet server
Status feedback to radio transmitter
Scene operation possible
Output can be switched with Prog button
Status display with LED
Switching mode:
Switch-on telegram: Device switches on
Switch-off telegram: Device switches off
Touch mode:
The relay contact remains closed as long as switch-on or switch-off telegrams are received
The maximum switch-on time is 60 seconds Can be
set with eNet server:
Flashing function
Follow-up time
Switch-on/switch-off delay Normally
open or normally closed operation
Switch-off warning
Minimum switching repetition time
Operating locks
Permanently on, permanently off
Additional functions with eNet server:
Fully encrypted radio transmission (AES-CCM) from eNet server software version 2.0
Update of device software
Repeater function
Read error memory
Nominal voltage: AC 230 V ~, 50/60 Hz
Ambient temperature: ?25 ... +70 °C
Switching current at 35 °C
Ohmic: 16 A (AC1)
With switching current
10 A Connection cable 2.5 mm2
Fluorescent lamps: 4 AXContact type: µ
Standby power: 0.5 W
Connected load at 35 °C
Incandescent lamps: 2300 W
HV halogen lamps: 2000 W
Electronic transformers: 1500 W
Inductive transformers: 1000 VA
HV LED lamps: typically 500 W
Compact fluorescent lamps: typically 500 W
Uncompensated fluorescent lamps: 920 VA
Capacitive load: 690 VA (560 µF)
Connection type: screw terminals
single-wire: 1 x 0.75 ... 4 mm2
fine-wire with wire end ferrule: 1 x 0.75 ... 2.5 mm2
Dimensions (Ø x H): 53 x 28 mm
Radio frequency: 868.0 ... 868.6 MHz
Transmission power: max. 20 mW
Transmission range in free field: typ. 100 m
Recipient category: 2
Questions & answers
What is the delivery time of JUNG FMASPF10UP radio actuator potential-free 1-channel?
The article JUNG FMASPF10UP radio actuator potential-free 1-channel is currently in stock
According to our experience the article is ready for dispatch within 2 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of JUNG FMASPF10UP to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you JUNG FMASPF10UP radio actuator potential-free 1-channel always at the best possible price. We can give you a discount of 2% on JUNG FMASPF10UP radio actuator potential-free 1-channel if you choose payment in advance on ordering.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.
Fitting accessory for JUNG FMASPF10UP radio actuator potential-free 1-channel
 |
JUNG FM-EBG FM mounting enclosure for UP actuators
For terminal cover and installation of mini actuators in false ceilings. The installation adapter has a strain relief for the connecting cable and can be snapped onto a top hat rail. Dimensions: 97 x ... Lieske Part No.: 878294 Mfg Part No: FM-EBG |
9,25 EUR 9,64 EUR
 ≈ £7.85 | ≈ $10.42
On order · Delivery time approx. 20 workdaysinfo_outline
|