INTELLINET 561907
24-port Gigabit Ethernet PoE+ switch with 2 SFP ports IEEE 802.3at/af (PoE+/PoE) compliant, PoE power budget 370 W, two 1G SFP slots, self-healing network, 48,3 cm ( 19 inch ) rackmount

Power over Ethernet switch with 26 ports — 24 x RJ45 and 2 x SFP, high-power PoE+, PD Alive, VLAN and PoE extender mode
The 24-port Gigabit Ethernet PoE+ switch with 2 SFP ports from Intellinet Network Solutions transmits data and power to PoE compatible devices via standard Cat5e or Cat6 network cables. Equipped with 24 Gigabit Ethernet ports, this switch supplies WLAN access points, bridges, VoIP phones and IP cameras with up to 1,000 Mbit/s as well as a PoE power budget of 370 W.
Power over Ethernet 802.3at
This switch supports the IEEE 802.3at protocol and up to 30 watts of output power per port. Connected IEEE802.3af or IEEE802.3at compliant devices do not require additional power, eliminating cabling time and costs. Fewer power cables and power supplies ensure a reduced, tidy look on ceilings and walls. Any combination of PoE and non-PoE devices is supported and thanks to the protection functions against short circuit, overload and overvoltage, your devices are reliably protected. For devices that are not 802.3at/af compliant (older WiFi access points or network cameras), we recommend using a PoE/PoE+ splitter from Intellinet Network Solutions.
Eliminate Bottlenecks with 26 Gigabit Ports
The 24 auto-sensing RJ45 Gigabit Ethernet ports (10/100/1000 Mbps) provide plenty of performance for your PCs, servers and other network devices. te. Additionally, two slots for SFP-GBIC (Small Form Factor Pluggable) modules provide long-distance fiber connectivity. These are not shared combo ports, but real Gigabit ports that increase the total available bandwidth up to 52 Gbit/s.
Self-Healing Network with more reliability and Stability - Intellinet Powered Device Monitor (PDM)
This PoE switch has a self-healing" PoE feature called "Powered Device Monitoring". This PoE watchdog checks with a so-called "PD Alive Check all connected devices to their functionality and automatically resets devices that do not respond, such as PoE surveillance cameras, by interrupting the power supply and then switching it on again. The PDM function is particularly useful in industrial or security environments where the connected network devices are essential. An added value of the PD Alive function is the avoidance of unnecessary calls to tech support and expensive on-site visits by customer service technicians. The functional restart is often enough to bring the unresponsive device back online.
PoE extender mode ideal for IP cameras
With a practical switch on the front You can manually enable a PoE extender mode that reduces network speed and extends the PoE range up to 250 m. This is ideal for supplying power and data to IP cameras over long distances.
- Power and data connection for up to 24 PoE network devices

• Two 1G GBIC module slots (SFP)
• PoE power budget 370 watts
• The Powered Device Monitor feature (PDM) monitors all connected PoE devices and restarts them if inactive
• Output power up to 30 watts per port
• Manual VLAN Mode to isolate ports 1 to 24 from each other; Communication with SFP uplink ports 25 and 26 remains active
• Optional PoE extender mode (reduces network speed and increases PoE range to 250 m)
• PoE extender mode ideal for IP camera installations
• 52 Gbit/s switching capacity
• 10/100 /1000 Auto-Sensing ports automatically detect the optimal network speed
• Complies with the IEEE 802.3az (Energy Efficient Ethernet EEE) specification
• The power-saving Green Ethernet technology deactivates unused ports and adjusts the energy level according to the cable length
• Saves time and installation costs thanks to the Transmission of data and power over the existing network cables
• Supports IEEE 802.3at and IEEE 802.3af compliant PoE devices (wireless access points, VoIP phones, IP cameras)
• Supports IEEE 802.3at/af detection and short circuit protection ,Overload and overvoltage
• Auto-MDI-X and NWay auto-negotiation on all RJ45 ports
• Supports jumbo frames up to 9216 bytes
• Store-and-forward architecture
• Supports 802.3x flow control for full duplex and backpressure for half duplex
• Supports 8,000 MAC addresses with auto-learning and auto-aging
• 4.1 Mbit buffer
• Ground point for external protection electrical voltage peaks
• ESD protection up to 8 kV (air) and 6 kV (contact)
• Two high-performance fans ensure perfect cooling and air circulation
• 48,3 cm ( 19 inch ) mounting bracket included
• Fully NDAA compliant
• 3 year warranty Standards
• IEEE 802.3 (10Base -T Ethernet)
• IEEE 802.3ab (Twisted Pair Gigabit Ethernet)
• IEEE 802.3az (Energy Efficient Ethernet EEE)
• IEEE 802.3af (Power over Ethernet 802.3at Type 1)
• IEEE 802.3at (Power over Ethernet 802.3at Type 2)
• IEEE 802.3u (100Base-TX Fast Ethernet)
• IEEE 802.3x (flow control for full duplex mode)
General:

• Supported media:
• 10Base-T Cat5e UTP/STP RJ45, 8-pin
• 100Base-TX Cat5e UTP/STP RJ45, 8-pin
• 1000Base-T Cat5e UTP/STP RJ45, 8-pin
• MAC addresses: 8,000
• Buffer: 4.1 Mbit
• Forwarding rate: 38.69 Mpps
• Switching capacity: 52 Gbit/s
• Store -and-forward architecture
• Certificates: FCC, CE, RoHS, UKCA
Modes (selectable via switch on the front panel)

• Regular
• VLAN (port isolation)
• PoE Extend
LEDs

• Power supply
• Link/Activity
• PoE
pinout RJ45 output ports

• Pin 1: DC (+)
• Pin 2: DC (+)
• Pin 3: DC (-)
• Pin 6: DC (-)
Power supply

• Input: 100.0 - 240.0 VAC, 50 - 60 Hz, internal power supply
• Power consumption: 400.0 W (max.)
Physical details

• Metal housing
• Dimensions (L x W x H): 207 x 440 x 44 mm
• Net weight: 3.37 kg
• Gross weight: 3.87 kg
• Operating ambient temperature: 0 - 45°C
• Ambient temperature during storage: -40 - 70°C
• Humidity during operation: 10 - 90% RH, non-condensing
• Humidity during storage: 5 - 90% RH, non-condensing
Scope of delivery

• 24-port Gigabit Ethernet PoE+ Switch with 2 SFP ports
• power cable
• Quick guide
• 48,3 cm ( 19 inch ) mounting bracket
This product is available in the following variants

• #561402 - Unmanaged 8-Port Gigabit Ethernet PoE+ Switch with Self-Healing Network function
• #561983 - Unmanaged 16-Port Gigabit Ethernet PoE+ Switch with Self-Healing Network -Function
• #561907 - Unmanaged 24-Port Gigabit Ethernet PoE+ Switch with Self-Healing Network function Color: Black Product dimensions: 207 (L) x 440 (W) x 44 (H) [mm]