Helukabel 24366 HELU MULTISPEED® 500-C-PVC 4G2.5 (14AWG) Black UL/CSA drag chain

Technical data:

Special drag chain cable for extreme mechanical stresses based on DIN VDE 0285-525-2-51/ DIN EN 50525-2-51, according to UL Std.758 AWM Style 21179
Temperature range moving -5°C to +80°C fixed -30°C to +80°C
Nominal voltage VDE U0/U 300/500 V UL 600 V
Test voltage 3000 V
Insulation resistance min. 100 MOhm x km
Minimum bending radius moving 7.5x cable Ø fixed 4x cable Ø
Coupling resistance max. 250 Ohm/km
Radiation resistance up to 80x106 cJ/kg (up to 80 Mrad)
Structure:
Bare copper strand, fine-wire Unilay with short lay lengths
Core insulation made of special PP
Core identification according to DIN VDE 0293 black cores with continuous white numbering
Stranding: < 7 cores: with optimal lay length, stranded in one layer around a filling element due to the design = 7 cores: cores with optimal lay lengths stranded in a bundle construction, low-torsion stranding with coordinated short lay lengths around a filling element
Special PVC inner jacket YM2 extruded to fill the gussets, grey (RAL 7001)
Braid made of tinned copper wires, minimum coverage 85% max. with optimal braid pitch
Outer jacket made of special PVC, particularly fatigue-resistant
Jacket colour: black (RAL 9005) with meter marking
Properties:
The materials used in production are silicone and cadmium-free and free from substances that impair paint wetting
Tests:
PVC self-extinguishing and flame-retardant in accordance with DIN VDE 0482-332-1-2, DIN EN 60332-1-2, IEC 60332-1, UL VW-1, CSA FT1
low adhesion
ozone and UV resistant
very good alternating bending strength
longer service life due to low friction resistance
better chemical resistance
oil resistant according to DIN VDE 0473-811-404/ DIN EN 60811-404
increased stability
increased efficiency
reduced in Ø, thus lower moving masses
Notes:
unshielded analogue type: MULTISPEED 500-PVC UL/CSA
Use:
For continuous use with long travel distances and high or slow speeds. For installation in dry, damp rooms and outdoors with free movement without tensile stress and without forced movement control as a highly flexible PVC control cable suitable for frequent lifting and bending stress in machine and tool construction. These cables with copper shielding are ideal for interference-free data and signal transmission for measurement, control and regulation technology. For applications that go beyond standard solutions, we recommend that you use our questionnaire for energy supply systems in the introduction. For use in energy supply chains, please note the assembly instructions. EMC = Electromagnetic compatibility To optimize the EMC properties, we recommend contacting the copper braid on both sides and over a large area all around.
Standard lengths: 100 m, 500 m, 1000 m
Subject to technical changes.
Type: 24366