Helukabel 16055 HELU F-CY-OZ 6x1qmm Grey Control Cable PVC

Technical data:

Special PVC cable based on DIN VDE 0285-525-2-51 / DIN EN 50525-2-51
Temperature range moving -10°C to +80°C stationary -40°C to +80°C
Nominal voltage for 1-core (LiYDY) 1200 V from 2-core U0/U 300/500 V
Test voltage core/core 4000 V core/shield 2000 V
Breakdown voltage min. 8000 V
Insulation resistance min. 20 MOhm x km
Operating capacity depending on conductor cross-section core/core approx. 150 nF/km core/shield approx. 270 nF/km
Coupling resistance max. 250 Ohm/km
Minimum bending radius moving 10x cable Ø stationary 5x cable Ø
Radiation resistance up to 80x106 cJ/kg (up to 80 Mrad)
Structure:
Bare copper wire, in accordance with DIN VDE 0295 cl.5, fine-wire, BS 6360 cl.5, IEC 60228 cl.5
Core insulation made of special PVC
Core identification in accordance with DIN VDE 0293 Black cores with continuous white numbering
Cores stranded in layers with optimal lay lengths Separating
film

• for 1-core (LiYDY) copper shield made of wrapping, coverage approx. 85% - from 2-core shielding braid made of tinned copper wires, coverage approx. 85%
Outer jacket made of special PVC
Jacket color: gray (RAL 7001) with meter marking
Properties:
Largely oil-resistant, oil/chemical resistance
The materials used in production are silicone- and cadmium-free and free from substances that impair paint wetting
Tests:
PVC Self-extinguishing and flame-retardant in accordance with DIN VDE 0482-332-1-2, DIN EN 60332-1-2, IEC 60332-1-2 (corresponds to DIN VDE 0472 Part 804 test type B)
Notes:
'Cleanroom qualified\lashunshielded analogue type: JZ-500
Use:
For flexible use with free movement without tensile stress and without forced movement in dry, damp and wet rooms, but not outdoors, as a cable in control and regulation technology, in tool and machine construction, in computer systems, and as a signal cable in electronics. A stabilising separating film between the core assembly and the braid significantly reduces the outer diameter and enables smaller bending radii, lower weight, etc. The high shielding density ensures interference-free transmission of signals or pulses. The ideal interference-protected cable for the above purposes. EMC = Electromagnetic Compatibility To optimize the EMC properties, we recommend a large-area, all-round contact on both sides of the copper braid.
Standard lengths: 100 m, 500 m, 1000 m
Technical changes reserved.
Type: 16055