Helukabel 15977 HELU JZ-HF-CY 3G1,5qmm Grey drag chain cable PVC

Technical data:

Special PVC hose cable, highly flexible, shielded
in accordance with DIN VDE 0285-525-2-51/ DIN EN 50525-2-51
Temperature range moving -10°C to +80°C fixed -40°C to +80°C
Nominal voltage U0/U 300/500 V
Test voltage 4000 V
Breakdown voltage min. 8000 V
Insulation resistance min. 20 MOhm x km
Minimum bending radius moving 10x cable Ø fixed 5x cable Ø
Radiation resistance up to 80x106 cJ/kg (up to 80 Mrad)
Structure:
Bare copper strand, extra fine wire in accordance with DIN VDE 0295 Cl.6 Sp.4, BS 6360 cl.6 or IEC 60228 cl.6
Core insulation made of special PVC Z 7225
Core identification according to DIN VDE 0293 Black cores with continuous white numbering
Cores stranded in layers, with optimally coordinated lay lengths
Fleece wrapping over each stranding layer
PVC inner jacket
Shielding made of tinned copper braid, min. 85%
coverage Outer jacket made of special PVC
Jacket color gray (RAL 7001) with meter marking
Properties:
The materials used in production are free from silicone and cadmium and free from substances that impair paint wetting
Tests:
PVC self-extinguishing and flame-retardant according to DIN VDE 0482-332-1-2, DIN EN 60332-1-2, IEC 60332-1
Oil-resistant according to DIN VDE 0473-811-404 / DIN EN 60811-404
Notes:
Unshielded analogue type: JZ-HF
with UL approval JZ-HF-FCY
Use:
Used for laying in dry and damp rooms, but not outdoors with free movement without tensile stress and without forced movement control, convincingly proven in standard drag chain use, on handling machines, robots and permanently moving machine parts. These cables with shielding have been developed for interference-free data signal transmission for all areas of electronics, measurement, control and regulation technology. Also available in a paired version. For applications that go beyond standard solutions (e.g. composting plants or high-bay conveyor systems with extremely high travel speeds, etc.) we recommend that you use our specially developed data collection form for energy supply systems, for further application parameters see the selection table: Cables for energy supply chains in the introduction. For use in energy supply chains please observe the assembly instructions. EMC = Electromagnetic Compatibility To optimize the EMC properties, we recommend contacting the copper braid on both sides and over a large area all around.
Standard lengths: 100 m, 500 m, 1000 m
Technical changes reserved.
Type: 15977