Products of Helios Ventilatoren
Categories with products from Helios Ventilatoren
- Electrics ➤ Industrial Material ➤ Automation ➤ Frequency converter, soft starter ( 7 )
- Electrics ➤ Industrial Material ➤ Industrial relays and contactors ➤ Switching units / measuring, control relay ( 4 )
- Electrics ➤ Installation ➤ Ex-installation material ( 1 )
- Electrics ➤ Installation ➤ Modular devices / equipment installation ➤ Impulse switch / relay ( 1 )
- Electrics ➤ Installation ➤ Ventilators and Accessories ➤ Wall-mounted ventilators ( 185 )
- Light & Sound ➤ Light Systems ➤ Outdoor Lighting ➤ Wallmount Lamps ( 1 )
- Technology ➤ Security Technology ➤ Sensors ➤ Fire & Gas Detectors ( 12 )
- Technology ➤ Tools ➤ Miscellaneous ( 1 )
 |
 Helios Ventilatoren TFK 5005Helios Ventilatoren 5005 TFK duct temperature sensor temperature range 0–30 °C IP20 Temperature sensor for measuring the air temperature in air ducts with mounting device for installation in duct wall. Temperature range 0-30 °C, protection class IP 20. Lieske Part No.: 861758 Mfg Part No: 5005 Type: TFK |
95,57 EUR
 ≈ £79.80 | ≈ $107.71
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Helios Ventilatoren TFR 5006Helios Ventilatoren 5006 TFR room temperature sensor for EHS, temperature range 0–30 °C, IP20, Temperature sensor with integrated setpoint transmitter for surface mounting. Also suitable as a pure temperature sensor or pure setpoint transmitter. Temperature range 0-30 °C, protection class IP 20. Lieske Part No.: 943447 Mfg Part No: 5006 Type: TFR |
199,97 EUR
≈ £166.97 | ≈ $225.37
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Helios Ventilatoren ESD 5 501Helios Ventilatoren 501 ESD 5 electronic speed controller three-phase 5A ESD 5 Electronic speed controller Comfortable continuous electronic Speed ​​controller for 3-phase ventilators reindeer, by using phase-control Voltage reduction can be ... Lieske Part No.: 158321 Mfg Part No: 501 Type: ESD 5 |
1.874,92 EUR
≈ £1,565.56 | ≈ $2,113.03
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Helios Ventilatoren SSD 500/560/630 5017Helios Ventilatoren 5017 SSD 500/560/630 plinth sound attenuator height 1200 mm Zur saugseitigen Geräuschdämpfung. Durchschnittlicher Dämpfungswert 15 dB. Alle Metallteile aus verzinktem Stahlblech. Zur Montage auf Flachdächern. Schalldämmkulissen mit Dämmplatten aus nicht ... Lieske Part No.: 1093172 Mfg Part No: 5017 Type: SSD 500/560/630 |
2.735,34 EUR
≈ £2,284.01 | ≈ $3,082.73
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Helios Ventilatoren ESD 11,5 502Helios Ventilatoren 502 ESD 11,5 Electronic speed controller three-phase 11.5 A Convenient stepless electronic speed controller for 3~ fans, which can be controlled via phase control by reducing the voltage. State-of-the-art technology through the use of microcontrollers. Lieske Part No.: 1315197 Mfg Part No: 502 Type: ESD 11,5 |
2.904,43 EUR
≈ £2,425.20 | ≈ $3,273.29
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Helios Ventilatoren HQD 630/6 5027Helios Ventilatoren 5027 HQD 630/6 axial high-performance fan 3-phase with grille HQD 63/6 TK, 5 KW high-performance axial fan Axial fan with high-performance quad-ratischer mounting plate, inlet cone, driven directly. Square recessed panel with integrally molded-th nozzle made of ... Lieske Part No.: 729926 Mfg Part No: 5027 Type: HQD 630/6 |
2.362,36 EUR
≈ £1,972.57 | ≈ $2,662.38
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Helios Ventilatoren HQD 630/8 5029Helios Ventilatoren 5029 HQD 630/8 high-performance axial fan 3-phase with grille HQD 63/8 TK 24 Week High performance axial fan Axial fan with high-performance quad-ratischer mounting plate, inlet cone, driven directly. Square recessed panel with integrally molded-th nozzle made ... Lieske Part No.: 794211 Mfg Part No: 5029 Type: HQD 630/8 |
2.362,36 EUR
≈ £1,972.57 | ≈ $2,662.38
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Helios Ventilatoren HQD 630/4/4 5030Helios Ventilatoren 5030 HQD 630/4/4 high-performance fan axial two-speed star/delta HQD 630/4/4 Axial high-performance fan Axial fan with high-performance quad- ratischer mounting plate, inlet nozzle, directly driven. Square mounting plate with attached form- ter nozzle ... Lieske Part No.: 435030 Mfg Part No: 5030 Type: HQD 630/4/4 |
2.556,26 EUR
≈ £2,134.48 | ≈ $2,880.91
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Helios Ventilatoren HQD 630/8/4 5032Helios Ventilatoren 5032 HQD 630/8/4 axial high-performance fan 3ph pole-switchable HQD 63/8/4 Axial High performance Axial Fan High Performance Fan with quad-ratischer mounting plate, inlet nozzle, directly driven. Square recessed panel with integrally molded-th nozzle made of ... Lieske Part No.: 502638 Mfg Part No: 5032 Type: HQD 630/8/4 |
3.043,70 EUR
≈ £2,541.49 | ≈ $3,430.25
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Helios Ventilatoren SGR 200 EX 5049Helios Ventilatoren 5049 SGR 200 EX safety grille according to DIN EN 294 For suction and pressure side mounting on the fan, made of spot-welded steel wire, galvanized, 8 mm mesh size, dimensions and fastening tabs matched to fan flange pipe NG DIN 24155. Lieske Part No.: 297167 Mfg Part No: 5049 Type: SGR 200 EX |
46,83 EUR
≈ £39.10 | ≈ $52.78
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Helios Ventilatoren SGR 180 EX 5051Helios Ventilatoren 5051 SGR 180 EX safety grille according to DIN EN 294 SGR 180 EX Guard For intake and exhaust mounting on the fan, from spot-welded steel wire, galvanized, 8 mm mesh size, ex- dimensions and mounting lugs on flange pipe fan-from-NG DIN 24155 voted. Lieske Part No.: 662251 Mfg Part No: 5051 Type: SGR 180 EX |
44,84 EUR
≈ £37.44 | ≈ $50.53
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Helios Ventilatoren SGR 250 EX 5052Helios Ventilatoren 5052 SGR 250 EX safety grille according to DIN EN 294 For suction and pressure side mounting on the fan, made of spot-welded steel wire, galvanized, 8 mm mesh size, dimensions and fastening tabs matched to fan flange pipe NG DIN 24155. Lieske Part No.: 372977 Mfg Part No: 5052 Type: SGR 250 EX |
47,78 EUR
≈ £39.90 | ≈ $53.85
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Helios Ventilatoren HQW 630/4 5056Helios Ventilatoren 5056 HQW 630/4 axial high-performance fan single-phase with grille Axial high-performance fan with square mounting plate, inlet nozzle, directly driven. Square mounting plate with molded nozzle made of galvanized sheet steel. Impeller with 7 blades made of GRP, hub ... Lieske Part No.: 186163 Mfg Part No: 5056 Type: HQW 630/4 |
3.391,78 EUR
≈ £2,832.14 | ≈ $3,822.54
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Helios Ventilatoren SGR 100 5063Helios Ventilatoren 5063 SGR 100 protective grille for pipe diameter 100 mm SGR Guard to the suction and pressure side of the fan assembly from spot-welded steel wire, galvanized, 8 mm mesh size, dimensions and mounting tabs on fan-flanged-NG DIN 24 55-ordinated. Make: ... Lieske Part No.: 512546 Mfg Part No: 5063 Type: SGR 100 |
33,82 EUR
≈ £28.24 | ≈ $38.12
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Helios Ventilatoren SGR 125 5064Helios Ventilatoren 5064 SGR 125 protective grille for pipe diameter 125 mm SGR 125 Guard For intake and exhaust mounting on the fan, from spot-welded steel wire, galvanized, 8 mm mesh size, ex- dimensions and mounting lugs on flange pipe fan-from-NG DIN 24155 voted. Lieske Part No.: 168686 Mfg Part No: 5064 Type: SGR 125 |
34,87 EUR
≈ £29.12 | ≈ $39.30
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Helios Ventilatoren SGR 200 5066Helios Ventilatoren 5066 SGR 200 protective grille for pipe diameter 200 mm SGR 2 guards to the suction and pressure side of the fan assembly from spot-welded steel wire, galvanized, 8 mm mesh size, dimensions and mounting tabs on fan-flanged DIN 24-NG 55-ordinated. Make: ... Lieske Part No.: 762690 Mfg Part No: 5066 Type: SGR 200 |
43,80 EUR
≈ £36.57 | ≈ $49.36
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Helios Ventilatoren SGR 250 5067Helios Ventilatoren 5067 SGR 250 protective grille for pipe diameter 250 mm SGR 250 Guard For intake and exhaust mounting on the fan, from spot-welded steel wire, galvanized, 8 mm mesh size, ex- dimensions and mounting lugs on flange pipe fan-from-NG DIN 24155 voted. Lieske Part No.: 245107 Mfg Part No: 5067 Type: SGR 250 |
44,84 EUR
≈ £37.44 | ≈ $50.53
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Helios Ventilatoren SGR 315 5068Helios Ventilatoren 5068 SGR 315 protective grille for pipe diameter 315 mm For suction and pressure side mounting on the fan, made of spot-welded steel wire, galvanized, 8 mm mesh size, dimensions and fastening tabs matched to fan flange pipe NG DIN 24155. Lieske Part No.: 477852 Mfg Part No: 5068 Type: SGR 315 |
49,78 EUR
≈ £41.57 | ≈ $56.10
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Helios Ventilatoren SGR 160 5069Helios Ventilatoren 5069 SGR 160 protective grille for pipe diameter 160 mm SGR 160 Guard For intake and exhaust mounting on the fan, from spot-welded steel wire, galvanized, 8 mm mesh size, ex- dimensions and mounting lugs on flange pipe fan-from-NG DIN 24155 voted. Lieske Part No.: 298192 Mfg Part No: 5069 Type: SGR 160 |
37,81 EUR
≈ £31.57 | ≈ $42.61
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Helios Ventilatoren RSK 150 5073Helios Ventilatoren RSK 150 pipe closure damper, 5073 RSK 150 Automatic shutter to be inserted into the pipe. Prevents warm air from escaping and unwanted cold air from entering when the fan is switched off. Automatic function in both negative and positive ... Lieske Part No.: 266272 Mfg Part No: 5073 Type: RSK 150 |
77,61 EUR
≈ £64.80 | ≈ $87.47
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Helios Ventilatoren RSK 200 5074Helios Ventilatoren RSK 200 pipe closure damper, 5074 D=200 mm RSK 2 tube sealing shut-off valve for direct installation in any position, suction or pressure side in the run pipe, automatic function. Housing made of galvanized sheet steel, flaps made of aluminum, ... Lieske Part No.: 807293 Mfg Part No: 5074 Type: RSK 200 |
107,44 EUR
≈ £89.71 | ≈ $121.08
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Helios Ventilatoren BM 100 5075Helios Ventilatoren 5075 BM 100 mounting collars 1 set=2 pcs BM For fastening cuffs borne noise-free connection of the fan and piping and From-imposition of ventilation pipes from the ceiling. Make: Helios No.: 75 Type 5: BM ... Lieske Part No.: 518093 Mfg Part No: 5075 Type: BM 100 |
37,81 EUR
≈ £31.57 | ≈ $42.61
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Helios Ventilatoren BM 125 5076Helios Ventilatoren 5076 BM 125 mounting collars 1 set=2 pcs BM 125 Fastening cuffs Noise-free connection to the body of Fan and piping and ex- suspension of ventilation pipes of the Ceiling. Make: Helios Item: 5076 Type: BM 125 ... Lieske Part No.: 458953 Mfg Part No: 5076 Type: BM 125 |
38,85 EUR
≈ £32.44 | ≈ $43.78
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Helios Ventilatoren BM 160 5077Helios Ventilatoren 5077 BM 160 mounting collars 1 set=2 pcs BM 160 fastening cuffs to structure-borne noise-free connection of fan and piping and From- imposition of ventilation pipes from the ceiling. Make: Helios Item: 5077 Type: BM 160 ... Lieske Part No.: 185635 Mfg Part No: 5077 Type: BM 160 |
45,79 EUR
≈ £38.23 | ≈ $51.61
Made to order · Delivery time approx. 20 workdaysinfo_outline
|