Harting 09670090443 D-Sub housing 9p metallized
|
7,21 EUR |
|
|
( 8,58 EUR incl. VAT ) ≈ £6.01 | ≈ $7.91 plus delivery charges: 55,00 € |
|
| Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline | |
| In Stock: >5 pieces | |
| Lieske Part No.: | 784552 |
|---|---|
| Mfg Part No: | 09670090443 |
| UPC/EAN: | 5713140089181 |
| Weight: | 0.123 kg |
| Type: | 09670090443 |
Product information for Harting 09670090443:
Shielded housing is the general term for housings specifically designed for mounting connectors. In this case, it is a housing for D-Sub connectors, commonly used in industrial electronics, data communication, and control technology. The size D-Sub 1 corresponds to a standard format typically used for connectors with 9 contacts (9p). The metallized surface of the plastic housing provides effective shielding against electromagnetic interference, which is particularly important in environments requiring high electromagnetic compatibility (EMC). The locking screws with 4-40 UNC thread are short to enable compact assembly without compromising mechanical stability.
D-Sub 1 is the designation for the housing size, matched to the dimensions and number of contacts of the connector to be mounted. This size is standardized and allows compatibility with D-Sub connectors frequently used in industry and data transmission. The housing is designed for a straight cable entry, enabling direct and uncomplicated cabling. The number of cable entries is one, which is sufficient for most standard applications.
Metallized plastic housing combines the advantages of plastic with metallic shielding. Plastic is lightweight, dimensionally stable, and resistant to chemical influences, while the metallic coating provides effective electromagnetic shielding. This is particularly important to avoid interference in sensitive electronic systems. The metallized layer is permanently applied to the plastic to ensure long-term EMC protection.
Protection class IP30 means the housing is protected against entry of solid foreign objects with a diameter of at least 2.5 mm. This prevents contact with live parts and blocks larger particles. However, it is not waterproof and does not protect against splashing water or rain, limiting its use to dry indoor environments. Protection class IP30 is sufficient for many industrial and commercial indoor applications.
Locking screws, thread 4-40 UNC are short and enable secure fastening of the cover to the housing body. The 4-40 UNC thread is an American fine thread commonly used in electronics and control technology. The short length of the screws ensures a compact design without compromising mechanical strength. The screws are manually tightened into the pre-drilled holes in the housing.
Straight cable entry is a design feature where the cable is introduced perpendicularly into the housing. This allows for clear and organized cabling, especially in compact devices or limited spaces. The number of cable entries is one, sufficient for most standard applications. The entry position is chosen to facilitate mounting and cabling.
The housing is designed for use in systems with D-Sub connectors, particularly in industrial electronics, control technology, and data communication. It provides mechanical stability and EMC protection, making it suitable for applications requiring reliable signal transmission. Indoor use is specified due to the IP30 protection class. The metallized surface ensures effective shielding, minimizing interference in sensitive electronic systems. Assembly is achieved by screwing the cover, with short locking screws enabling secure and repeatable fastening. The straight cable entry simplifies cabling and ensures orderly installation.
The technical features of the housing are tailored to the requirements of industrial electronics. The metallized plastic construction offers a good compromise between weight, dimensional stability, and EMC protection. The IP30 protection class is sufficient for indoor use, with outdoor use not intended. The locking screws with 4-40 UNC thread are short, enabling compact assembly. The cable entry is straight and designed for a single connection, simplifying cabling. The housing is designed for mounting D-Sub connectors of size 1, ensuring standardization and compatibility with common connectors.
| General | |
| Construction size | D-Sub 1 |
| Housing material | plastic, metallized |
| Degree of protection | IP30 |
| Locking screws | short, thread 4-40 UNC |
| Cable input | straight, 1x |
| Cover attachment | screwable |
Questions & answers
What is the delivery time of Harting 09670090443 D-Sub housing 9p metallized?
The article Harting 09670090443 D-Sub housing 9p metallized is currently in stock
According to our experience the article is ready for dispatch within 2 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Harting 09670090443 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Harting 09670090443 D-Sub housing 9p metallized always at the best possible price. We can give you a discount of 2% on Harting 09670090443 D-Sub housing 9p metallized if you choose payment in advance on ordering.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.



