Hager ZAW102CA6
metering enclosure up to 400A TN-C BW Pfalzwerke TAB-compatible content_copy

Transformer and measuring cabinet, universN, up to 400 A, TN-C network, 1005 x 1110 x 315 mm. Equipped transformer cabinet in accordance with DIN EN 61439, protection class IP 44, with buried base, made of glass fiber reinforced polyester FS 833.5 in accordance with DIN EN 14598 with recycled material. The transformer cabinet is equipped in accordance with the current technical connection conditions of the respective energy supplier and covers the respective TAB requirements. Profiled housing in rib design. Door with opening angle of 180 degrees when free-standing and 90 degrees when connected in series. Doors can be removed, door can be hinged on the left or right. Locking with swivel lever and three-point bascule lock with 1 or 2 profile half cylinders. Built-in cylinder at the bottom with a same-key series. A second locking cylinder (e.g. from a VNB locking system) can be installed at the top after removing the square lock. If no second profile half-cylinder is installed, the second upper opening must be fitted with a blind lock. Ventilation takes place via labyrinth-like ventilation ducts and is puncture-proof due to the ingress of foreign bodies. Transformer cabinets are built in accordance with the technical guideline for outdoor connection cabinets/connection of stationary switch and control cabinets and meter connection columns to the VNB's low-voltage network. The installation consists of protectively insulated meter fields DIN 43870 (functional areas) for meters and tariff switching devices (TSG). Meter spaces or TSG spaces are prepared with an IP 44 cover. Depending on the design, empty spaces are provided as retrofit fields. The buried base and meter connection column form a unit. A floor grate is recommended. To prevent condensation, the base must be filled with base filler on the inside up to the height of the cable fastening rail. Note: Consult VNB.

General
Model	2-story
Number of meter cabinets	1
Lower connection space	With bus bar 4-pole
Mounting method	Surface mounted (plaster)
Material	Plastic
Number of distributor rows	6
Number of fields	4
Degree of protection (IP)	IP44
Width	1110 mm
Height	1005 mm
Depth	315 mm
Built-in width	1110 mm
Built-in height	1005 mm
Built-in depth	315 mm
Colour	Grey
RAL-number	7035
Rated current	320 A
With mounting plate

---