Hager ZAS205EM2
meter connection column 1ZP +1LP 2-pole content_copy

Meter connection column 205, universZ, 1 ZP, 3-point, 5-pole, empty field, HAK. Equipped meter connection column in accordance with DIN EN 61439, protection class IP 44, with buried base, made of glass fiber reinforced polyester FS 833.5 in accordance with DIN EN 14598. Meter connection column is equipped in accordance with the current technical connection conditions of the respective energy supplier and covers the respective TAB requirements. Profiled housing in rib design. Door with opening angle of 180 degrees when free-standing and 90 degrees when housings are connected in series. Right door can be removed. Locking with swivel lever and three-point bascule lock with 1 or 2 profile half cylinders. Built-in cylinder at the bottom with a same-key series. A second locking cylinder (e.g. from VNB locking system) can be installed at the top after removing the square lock. If no second profile half-cylinder is installed, the second upper opening must be fitted with a blind plug. Ventilation takes place via labyrinth-like ventilation ducts and is protected from penetration by foreign bodies. Meter connection columns are built in accordance with the technical guideline for outdoor connection cabinets/connection of stationary switch and control cabinets and meter connection columns to the low-voltage network of the VNB. The installation consists of protectively insulated meter fields DIN 43870 (functional areas) for meters and tariff switching devices (TSG). Meter spaces or TSG spaces are prepared with an IP 44 cover. Depending on the design, empty spaces are provided as retrofit fields. The buried base and meter connection column form a unit. A floor grate is recommended. To prevent condensation, the base must be filled with base filler on the inside up to the height of the cable fastening rail.

General
Model	1-story
Number of meter cabinets	1
Lower connection space	With bus bar 5-pole
Mounting method	Surface mounted/partially recessed mounted
Material	Plastic
Number of distributor rows	1
Number of fields	2
Degree of protection (IP)	IP44
Width	583 mm
Height	2010 mm
Depth	277 mm
Built-in width	500 mm
Built-in height	900 mm
Built-in depth	300 mm
Colour	Grey
RAL-number	7035
Rated current	63 A
With mounting plate

---