Hager ZAS205BE15A
meter connection column 205-base 1 meter position eHZ 5-pole +APZ
|
2.471,99 EUR |
|||||||||||
|
( 2.941,67 EUR incl. VAT ) ≈ £2,069.06 | ≈ $2,716.72 plus delivery charges |
|||||||||||
| Delivery time from supplier's stock (ca.) 2 workdaysinfo_outline | |||||||||||
| In Stock: 3 pieces | |||||||||||
| Datasheet: | file_download Download | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Lieske Part No.: | 1012012 | ||||||||||
| Mfg Part No: | ZAS205BE15A | ||||||||||
| UPC/EAN: | 3250611073338 | ||||||||||
| Weight: | 40 kg | ||||||||||
| Type: | ZAS205BE15A | ||||||||||
|
Graduated prices net
|
|||||||||||
Product information for Hager ZAS205BE15A:
Furthermore, the system is constructed based on the applicable application guidelines of VDE-AR-N 4100:2019-04 including the associated correction VDE-AR-N 4100 Ber 1:2019. Using additional components, the base column is expanded into a ready-to-connect meter connection column of the corresponding VNB.
Profiled housing in rib design. Door with opening angle of 180 degrees when free-standing and 90 degrees when mounted in series. Right door can be detached. Locking with swivel lever and three-point bascule lock with 1 or 2 profile half cylinders. Built-in cylinder at the bottom with a same-key series. A second locking cylinder (e.g. from VNB locking system) can be installed at the top after removing the square lock. If a second profile half cylinder is not installed, the second upper opening must be fitted with a blind lock.
Ventilation takes place via labyrinth-like ventilation ducts, prevents the ingress of foreign bodies and is poke-proof. Meter connection columns are built according to the technical guideline: outdoor connection cabinets/connection of fixed switch and control cabinets and meter connection columns to the VNB low-voltage network.
The installation consists of protectively insulated meter fields DIN 43870 (functional areas) for meters. Meter locations are prepared for an IP 44 cover. The buried base and meter connection column form a unit. A floor grate is recommended. To prevent condensation, the base should be filled with base filler up to the height of the cable fastening rail.
| General | |
| Model | eHZ |
| Number of meter cabinets | 1 |
| Lower connection space | With bus bar 5-pole |
| Mounting method | Other |
| Material | Plastic |
| Number of distributor rows | 7 |
| Number of fields | 2 |
| Degree of protection (IP) | IP44 |
| Width | 583 mm |
| Height | 2010 mm |
| Depth | 277 mm |
| Built-in width | 583 mm |
| Built-in height | 2010 mm |
| Built-in depth | 277 mm |
| Colour | Grey |
| RAL-number | 7035 |
| Rated current | 63 A |
| With mounting plate | |
Questions & answers
What is the delivery time of Hager ZAS205BE15A meter connection column 205-base 1 meter position eHZ 5-pole +APZ?
The article Hager ZAS205BE15A meter connection column 205-base 1 meter position eHZ 5-pole +APZ is currently in stock
According to our experience the article is ready for dispatch within 2 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Hager ZAS205BE15A to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Hager ZAS205BE15A meter connection column 205-base 1 meter position eHZ 5-pole +APZ always at the best possible price. We can give you a discount of 2% on Hager ZAS205BE15A meter connection column 205-base 1 meter position eHZ 5-pole +APZ if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 2 pieces of Hager ZAS205BE15A meter connection column 205-base 1 meter position eHZ 5-pole +APZ we can offer you a price of 2.342,21 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.
Fitting accessory for Hager ZAS205BE15A meter connection column 205-base 1 meter position eHZ 5-pole +APZ
|
Hager KH23C main circuit branch terminal 3-pole finger-safe
The Hager KH23C is a 3-pole main circuit branch terminal in universalZ design, developed for professional use in electrical installation systems. It enables safe and efficient distribution of main ...Lieske Part No.: 236791 Mfg Part No: KH23C |
23,18 EUR
![]() ≈ £19.40 | ≈ $25.47
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Hager SH363N compact switch 63 A 3NO 400 VAC 2.5 PLE
The Hager compact switch SH363N is a 3-pole built-in device for installation in electrical distribution boards. With a rated continuous current of 63 A and a rated operational voltage of 400 V AC, it ...Lieske Part No.: 258066 Mfg Part No: SH363N |
58,62 EUR
![]() ≈ £49.06 | ≈ $64.42
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Hager U84T insulating piece with screws, set=2 pcs
The Hager U84T is an insulator set, consisting of two individual parts, specifically designed for use in electrical distribution systems. It enables secure mounting of DIN rail installations and ...Lieske Part No.: 260503 Mfg Part No: U84T |
10,16 EUR
![]() ≈ £8.50 | ≈ $11.17
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Hager ZAN334C house connection box K3
The Hager house connection box ZAN334C belongs to the K3 series and is manufactured as model KH00. It is designed for the safe and robust distribution of electrical energy indoors and is specifically ...Lieske Part No.: 289000 Mfg Part No: ZAN334C |
220,21 EUR
![]() ≈ £184.32 | ≈ $242.01
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Hager ZAY95075 plinth filler 25 l
The ZAY95075 base filler from Hager is a special mounting accessory used in electrical distributors, meter connection columns, and enclosures. It is packaged in a 25-liter sack and primarily serves to ...Lieske Part No.: 289019 Mfg Part No: ZAY95075 |
43,51 EUR
![]() ≈ £36.42 | ≈ $47.82
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Hager KN06N QC N-terminal 6 terminal positions
The Hager QuickConnect N KN06N terminal is an N-terminal for use in electrical distribution systems. It provides six terminal points with spring-cage connection and is rated for a nominal voltage of ...Lieske Part No.: 323802 Mfg Part No: KN06N |
5,89 EUR
![]() ≈ £4.93 | ≈ $6.47
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Hager KN06E QC PE terminal 6 terminal positions
The Hager KN06E is a PE terminal block in the QuickConnect system, specifically designed for use in distributors and meter enclosures. It enables secure and rapid connection of protective conductors ...Lieske Part No.: 431061 Mfg Part No: KN06E |
5,89 EUR
![]() ≈ £4.93 | ≈ $6.47
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Hager HTS363E SLS switch 3-pole E-63A QC busbar
SLS switch 3-pole E characteristic 63A for busbar QuickConnect.SH switch according to DIN VDE 0641-21 and dimensional standard DIN 43880 size 6. SLS in different pole design, single-pole switching, ...Lieske Part No.: 500658 Mfg Part No: HTS363E |
398,81 EUR
![]() ≈ £333.80 | ≈ $438.29
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Hager EHZ001K BKE data interface (OKK), 1 Mbit, 450 mm
BKE data interface (OKK), 1Mbit, length 450mm. Meter cabinet solution Cabinet housing according to DIN VDE 0603/1, dimension standard DIN 43 870 for surface, flush or partially recessed installation.Lieske Part No.: 627826 Mfg Part No: EHZ001K |
70,39 EUR
![]() ≈ £58.92 | ≈ $77.36
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Hager FZ818 circuit diagram pocket universal DIN A4 for bayed distribution boards
Plan pocket, plastic, DIN A4, self-adhesive.Plan pocket for installation in a suitable cupboard.Lieske Part No.: 639599 Mfg Part No: FZ818 |
33,91 EUR
![]() ≈ £28.38 | ≈ $37.27
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Hager HTS340E SLS switch 3-pole E-40A QC busbar
SLS switch 3-pole E characteristic 40A for busbar QuickConnect.SH switch according to DIN VDE 0641-21 and dimensional standard DIN 43880 size 6. SLS in different pole design, single-pole switching, ...Lieske Part No.: 653040 Mfg Part No: HTS340E |
388,74 EUR
![]() ≈ £325.38 | ≈ $427.23
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Hager FZ383 carrier 2x22 PE/N terminals QC
Carrier, univers Z, with 2 x 22 PE/N terminals in quick-connect technology, horizontal. Meter cabinet solution Cabinet housing according to DIN VDE 0603/1, dimensional standard DIN 43 870 for ...Lieske Part No.: 701408 Mfg Part No: FZ383 |
32,97 EUR
![]() ≈ £27.60 | ≈ $36.23
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Hager KN00A QC adapter empty
Quick plug-in terminals Modular SSK - Modular system Universal Adapter Universal Adapter allows mounting of the SSK on the mounting rail in horizontal and vertical position of the other on the ...Lieske Part No.: 729729 Mfg Part No: KN00A |
4,75 EUR
![]() ≈ £3.98 | ≈ $5.22
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Hager HTS350E SLS switch 3P E-50A QC busbar
SLS switch 3-pole E characteristic 50A for busbar QuickConnect.SH switch according to DIN VDE 0641-21 and dimensional standard DIN 43880 size 6. SLS in different pole design, single-pole switching, ...Lieske Part No.: 750084 Mfg Part No: HTS350E |
393,96 EUR
![]() ≈ £329.74 | ≈ $432.96
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Hager ZAY300A meter field cover IP54 300 mm with door
Die Zählerfeldabdeckung ZAY300A ist als Klarsichtausführung mit Tür in Schutzart IP54 für eHZ und TSG ausgelegt. Der Kunststoffkörper misst 300 x 250 x 167 mm und gliedert sich in 1 Feld mit 2 ...Lieske Part No.: 751672 Mfg Part No: ZAY300A |
156,28 EUR
![]() ≈ £130.81 | ≈ $171.75
On order · Delivery time approx. 20 workdaysinfo_outline
|
|
Hager KH25C main conductor branch terminal 5-pole finger-safe
The main line terminals with 4 pole terminal points, solid / stranded , 5-25 mm ². stranded (with ferrule) , 5 - 6 mm Number of pins: 5-pin, finger-safe type: KH25C item: ST. Lieske Part No.: 942498 Mfg Part No: KH25C |
38,19 EUR
![]() ≈ £31.97 | ≈ $41.97
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Hager ZY5N1LS mounting plate for power supply RfZ, for height 1400 mm with LS 6 A in NAR
Assembly package for power supply RfZ, for height 1400mm, with LS 6A in NARLieske Part No.: 1056586 Mfg Part No: ZY5N1LS |
124,92 EUR
![]() ≈ £104.56 | ≈ $137.29
On order · Delivery time approx. 20 workdaysinfo_outline
|
|
Hager ZY5N1SA mounting kit for RfZ lockout power supply for height 1400 mm
Assembly package for power supply RfZ, for height 1400mm, with SABO 1.6A in NARLieske Part No.: 1056587 Mfg Part No: ZY5N1SA |
114,66 EUR
![]() ≈ £95.97 | ≈ $126.01
Delivery time from supplier's stock (ca.) 3 workdaysinfo_outline
|
|
Hager ZZ45WAN2PP RJ45 socket in Patch/Patch 180° for WAN application IP20 CAT6A
RJ45 socket in patch/patch design 180° for WAN application, IP20, CAT 6A. Meter cabinet solution cabinet housing according to DIN VDE 0603/1, dimensional standard DIN 43 870 for surface-mounted, ...Lieske Part No.: 1595413 Mfg Part No: ZZ45WAN2PP |
51,20 EUR
![]() ≈ £42.85 | ≈ $56.27
On order · Delivery time approx. 20 workdaysinfo_outline
|























