Hager LFS400605VERZ flat angle cut-laminated sheet steel for LFS 40x60 content_copy

The article LFS400605VERZ from Hager is a flat angle made of sheet steel, specifically designed as a hood-shaped component for cable ducts with dimensions of 40 mm height and 60 mm width. It is used for clean and visually appealing finishing at corners and edges of cable management systems, particularly where a cable duct ends at a wall or another structural element. The design as a cut-edge covering element allows for discreet processing of edges, concealing the cut edges of the cable duct and achieving a closed, aesthetically uniform surface. The product is galvanised in strip form, ensuring high corrosion resistance and durability, especially in indoor environments with normal ambient conditions.

Applications

The flat angle is used in electrical installations and cable management areas where proper and clean finishing of cable ducts is required. It is particularly suitable for applications in residential and commercial spaces, office buildings, and technical rooms where the visual appearance of installations plays a role. It is used at corners, transitions, or ends of cable ducts to ensure professional and neat workmanship. The operating temperature ranges from -5 °C to 60 °C, enabling use under typical indoor conditions.

Functions and Equipment in Detail

The product is designed as a hood-shaped component, adapting to the edges of cable ducts with its 90° angle geometry. The surface is galvanised in strip form, providing a uniform and durable protective layer against oxidation. The colour corresponds to the natural zinc tone, which integrates well into technical and architectural environments. Installation is done by snap-fit, enabling quick and tool-free attachment to existing cable ducts. The component is not supplied with a protective film, allowing immediate operation after installation. The surface is not treated with antibacterial agents, which is irrelevant for most indoor installations.

Technology Explained Simply

The flat angle is made of sheet steel and offers high mechanical stability. The strip galvanised surface protects the material from corrosion and ensures a long service life. The impact resistance rating IK08 means the component is protected against mechanical impacts such as light shocks or pressure loads, which is sufficient for indoor use. The protection class IP30 ensures that solid foreign objects with a diameter of at least 2.5 mm cannot enter, protecting the component from coarse contamination. However, it is not waterproof and not suitable for outdoor use or in damp environments. The operating temperature range of -5 °C to 60 °C covers typical indoor conditions.

Compatibility and Accessories

The flat angle is specifically designed for cable ducts with dimensions of 40 mm height and 60 mm width and fits precisely to these profiles. It is designed as a hood-shaped component, enabling clean and closed finishing. Installation is done by snap-fit, allowing direct attachment to existing cable ducts without requiring additional fastening elements.

Installation and Mounting

Mounting is done by snapping the flat angle onto the edge of the cable duct. The cut-edge covering design enables neat edge processing, concealing the cut edges of the cable duct. Installation is tool-free and performed by simply pressing the component onto the edge. The symmetrical design allows uniform appearance regardless of mounting direction. Mounting is done on the top part of the cable duct, ensuring a secure and stable connection.

Operational Advantages

The flat angle provides a clean and professional finishing of cable ducts, enhancing the visual quality of the installation. The strip galvanised surface ensures high corrosion resistance and durability. The snap-fit mounting enables quick and tool-free installation, reducing mounting time. The impact resistance IK08 and protection class IP30 ensure sufficient mechanical and physical protection for indoor use. The product is halogen-free and RoHS-compliant, ensuring environmental compatibility and compliance with current standards. Suitability for functional integrity according to DIN 4102-12 makes it suitable for applications in buildings with special requirements for fire protection functions.

General
Height	40 mm
Width	60 mm
Model	Moulded hood
Angle	90 °
Material	Steel
Material quality	Other
Surface protection	Continuously galvanized
Colour	Other
Type of fastening	Snap on
Degree of protection (IP)	IP30
Impact strength	IK08
Working temperature	60 °C
Halogen free
Suitable for circuit integrity
With protection film
Antibacterial treatment

---