Hager LFH2002009016 cable routing duct made of PC/ABS content_copy

The cable routing duct LFH2002009016 from Hager is a 2000 mm long duct with a cross-section of 20x20 mm, finished in traffic white (RAL 9016). It is designed for the orderly routing and protection of electrical cables in indoor environments and is made from halogen-free plastic (PC-ABS). The material selection ensures high durability and fire protection, with no corrosive gases released in case of fire, thereby increasing the safety of electronic devices and materials. The surface is untreated, which facilitates processing and installation.

Cable routing duct
The duct is specifically designed for cable installation in electrical systems. With a usable internal cross-section of 228 mm², it provides sufficient space for routing cables with a diameter of up to 11 mm, where a maximum of one cable can be installed at 50% fill. The dimensions of 18 mm height and 19 mm width allow for compact integration into existing installations without compromising aesthetic design.

Functions and equipment in detail
The duct features a loose cover lid that is pre-mounted, enabling quick and easy installation. Mounting is done via base hole pattern, with the underside of the duct equipped with pre-drilled holes spaced at 125 mm intervals. These holes measure 30 x 45 mm and facilitate individual mounting, especially in single-person installations.

Technology explained simply
The protection rating IP30 protects against solid foreign objects with a diameter greater than 2.5 mm and against splashing water, but not against direct water jets. The impact resistance IK07 ensures protection against mechanical impacts that may occur during normal handling in electrical installations. The operating temperature range is between -5 °C and 90 °C, allowing use in indoor environments with normal ambient conditions. The duct is not suitable for functional integrity according to DIN 4102-12.

Compatibility and accessories
Complementary accessories are available to complete the duct, including the clamp socket L5111 and the end cap LF2002069016, specifically designed for use with the LFH 20x20 mm duct. These components enable clean and professional termination and connection techniques.

Installation and mounting
Installation is performed using the pre-drilled base holes, with the pre-mounted cover lid speeding up the process. There is no self-adhesive version available, and installation requires no additional tools or materials beyond standard fastening components. Individual mounting is particularly simple and time-saving due to the pre-drilled holes and loose cover lid.

Advantages in operation
The duct is characterised by its high durability, easy handling, and quick installation. The use of halogen-free material increases safety in case of fire, and the robust construction ensures a long service life. The clear, clean appearance in traffic white seamlessly integrates into various environments, making it especially suitable for professional electrical installations. Compatibility with specific accessories enables a flexible and neat cabling solution.

Halogen-free
The material is halogen-free, meaning it does not release halogen-containing gases when heated or during fire, which could be corrosive or toxic. This protects electronic devices and the environment and complies with the requirements of DIN EN 50085-1.

IP30
The protection rating IP30 protects against solid foreign objects from 2.5 mm and against splashing water, making it suitable for use in dry indoor environments.

IK07
The impact resistance IK07 protects against mechanical impacts that may occur during normal handling in electrical installations.

PC-ABS
The material PC-ABS is a high-quality plastic known for its high strength, heat resistance, and dimensional stability, ensuring the long-term durability of the duct.

Traffic white
The colour traffic white (RAL 9016) is a neutral, light shade that blends well in various indoor environments and provides a clean, professional appearance.

The item price shown refers to 2 meters Hager LFH2002009016

General
Height	18 mm
Width	19 mm
Length	2000 mm
Useful cross section	228 mm²
Material	Plastic
Material quality	Other
Surface protection	Untreated
Colour	White
RAL-number	9016
Number of permanent partitions	0
Number of plug-in partitions	0
Type of fastening	Bottom perforation
Cover model	Loose
Degree of protection (IP)	IP30
Impact strength	IK07
Working temperature	90 °C
Halogen free
Suitable for circuit integrity
Transparent
With cable fixing clip
With protection film
With duct connector
Delivery on roll
Pre-stamping
Antibacterial treatment

---