Hager LFF2003557030 flat angle cut-laminated hfr for LF 20x33 stone grey
|
5,70 EUR |
|||||||||||
|
( 6,78 EUR incl. VAT ) ≈ £4.77 | ≈ $6.30 plus delivery charges: 55,00 € |
|||||||||||
| Made to order · Delivery time approx. 20 workdaysinfo_outline | |||||||||||
| Datasheet: | file_download Download | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Lieske Part No.: | 595571 | ||||||||||
| Mfg Part No: | LFF2003557030 | ||||||||||
| UPC/EAN: | 4012740022248 | ||||||||||
| Weight: | 0.0077 kg | ||||||||||
| Type: | LFF2003557030 | ||||||||||
|
Graduated prices net
|
|||||||||||
Further Cable duct accessories complete from HagerFurther products in category Cable duct accessories complete
All products of Hager
Product information for Hager LFF2003557030:
The article LFF2003557030 from Hager is a flat angle as a hood-shaped component for cable ducts with dimensions of 20 mm height and 33 mm width. It serves as a mounting element for connecting or finishing cable management systems in the LF 20x33 mm format. The component is specifically designed for use in electrical installations where clean and structured cable routing is required. The design allows for precise adaptation to the edges of cable ducts, achieving a visually uniform and functional installation.
Flat angle is the designation for this accessory, which is manufactured at a right angle (90°) and thus used for corners or transitions in cable routing. The hood-shaped component design means it is a cover element that is placed over the edge of the cable duct to create a closed surface. The mounting is snap-fit, enabling quick and tool-free installation without requiring additional fasteners such as screws or adhesives.
Plastic is the material used, specifically Acrylonitrile Butadiene Styrene (ABS), a robust and dimensionally stable material known for its mechanical strength and weather resistance. The surface is uncoated, meaning no additional coatings or paints have been applied. The colour is stone grey, corresponding to the RAL number 7030, representing a neutral shade commonly used in electrical installations. The component is halogen-free, an important property for safety in fire situations, as halogen-free materials release fewer toxic gases when heated.
IK07 is the specified impact resistance class, guaranteeing a certain level of resistance to mechanical stress. This makes the part suitable for use in areas where mechanical loading is expected, such as production halls or administrative buildings. The operating temperature range is from -5 °C to 60 °C, allowing use in indoor environments under normal operating conditions. The product is not suitable for functional integrity according to DIN 4102-12, meaning it is not intended for applications where the electrical installation must remain functional during a fire.
Cut-end finishing is the configuration of the flat angle, meaning it is specifically designed for use on cut or shortened cable ducts to create a clean visual end finish. This is particularly important in installations where cable ducts must be cut at various points to fit around walls, doors, or other obstacles. Using this part ensures that cut edges are not visible, giving the installation a professional appearance.
The product is RoHS-compliant and REACH-SVHC free, confirming compliance with European environmental and safety regulations for electronic components. It is specifically designed for use with cable ducts in the LF 20x33 mm format, with dimensions precisely matched to these profiles. Installation is done by snapping onto the top of the cable duct, with the symmetrical design ensuring an even and secure connection. It is delivered without protective film, meaning no additional film is applied to prevent scratches or contamination.
Compatibility is provided for cable duct profiles LF 20x33 mm, with exact fit ensured by the dimensions of 20 mm height and 33 mm width. No additional accessories or tools are required for mounting. The part is used directly on the cable duct without additional fasteners. The uncoated surface allows for direct processing without prior preparation. The stone grey colour (RAL 7030) blends well with most interior designs and is compatible with other components in the Hager system.
Operational advantages include easy installation, clean visual appearance, and mechanical stability. The snap-fit mounting allows for quick installation and can be easily removed during maintenance or modifications. The halogen-free design increases safety in fire situations, and the IK07 impact resistance ensures sufficient mechanical durability. Use as a cut-end finishing element ensures a professional look, even on cut cable ducts, enhancing the overall aesthetics of the installation.
Flat angle is the designation for this accessory, which is manufactured at a right angle (90°) and thus used for corners or transitions in cable routing. The hood-shaped component design means it is a cover element that is placed over the edge of the cable duct to create a closed surface. The mounting is snap-fit, enabling quick and tool-free installation without requiring additional fasteners such as screws or adhesives.
Plastic is the material used, specifically Acrylonitrile Butadiene Styrene (ABS), a robust and dimensionally stable material known for its mechanical strength and weather resistance. The surface is uncoated, meaning no additional coatings or paints have been applied. The colour is stone grey, corresponding to the RAL number 7030, representing a neutral shade commonly used in electrical installations. The component is halogen-free, an important property for safety in fire situations, as halogen-free materials release fewer toxic gases when heated.
IK07 is the specified impact resistance class, guaranteeing a certain level of resistance to mechanical stress. This makes the part suitable for use in areas where mechanical loading is expected, such as production halls or administrative buildings. The operating temperature range is from -5 °C to 60 °C, allowing use in indoor environments under normal operating conditions. The product is not suitable for functional integrity according to DIN 4102-12, meaning it is not intended for applications where the electrical installation must remain functional during a fire.
Cut-end finishing is the configuration of the flat angle, meaning it is specifically designed for use on cut or shortened cable ducts to create a clean visual end finish. This is particularly important in installations where cable ducts must be cut at various points to fit around walls, doors, or other obstacles. Using this part ensures that cut edges are not visible, giving the installation a professional appearance.
The product is RoHS-compliant and REACH-SVHC free, confirming compliance with European environmental and safety regulations for electronic components. It is specifically designed for use with cable ducts in the LF 20x33 mm format, with dimensions precisely matched to these profiles. Installation is done by snapping onto the top of the cable duct, with the symmetrical design ensuring an even and secure connection. It is delivered without protective film, meaning no additional film is applied to prevent scratches or contamination.
Compatibility is provided for cable duct profiles LF 20x33 mm, with exact fit ensured by the dimensions of 20 mm height and 33 mm width. No additional accessories or tools are required for mounting. The part is used directly on the cable duct without additional fasteners. The uncoated surface allows for direct processing without prior preparation. The stone grey colour (RAL 7030) blends well with most interior designs and is compatible with other components in the Hager system.
Operational advantages include easy installation, clean visual appearance, and mechanical stability. The snap-fit mounting allows for quick installation and can be easily removed during maintenance or modifications. The halogen-free design increases safety in fire situations, and the IK07 impact resistance ensures sufficient mechanical durability. Use as a cut-end finishing element ensures a professional look, even on cut cable ducts, enhancing the overall aesthetics of the installation.
| General | |
| Height | 20 mm |
| Width | 33 mm |
| Model | Moulded hood |
| Angle | 90 ° |
| Material | Plastic |
| Material quality | Other |
| Surface protection | Untreated |
| Colour | Grey |
| RAL-number | 7030 |
| Type of fastening | Snap on |
| Impact strength | IK07 |
| Working temperature | 60 °C |
| Halogen free | |
| Suitable for circuit integrity | |
| With protection film | |
| Antibacterial treatment | |
Questions & answers
What is the delivery time of Hager LFF2003557030 flat angle cut-laminated hfr for LF 20x33 stone grey?
The article Hager LFF2003557030 flat angle cut-laminated hfr for LF 20x33 stone grey is currently not in stock and must be ordered on a per-order basis.
According to our experience the article is ready for dispatch within 20 working days. The delivery time usually refers to 1 piece. When ordering larger quantities, we can maybe shorten the delivery time. Just send us an inquiry about the desired quantity of Hager LFF2003557030 to our sales team for an exact delivery time.
How can I buy the item at a lower price?
We offer you Hager LFF2003557030 flat angle cut-laminated hfr for LF 20x33 stone grey always at the best possible price. We can give you a discount of 2% on Hager LFF2003557030 flat angle cut-laminated hfr for LF 20x33 stone grey if you choose payment in advance on ordering.
In addition, you can save money with our attractive graduated prizes with every purchase. If you buy a minimum of 25 pieces of Hager LFF2003557030 flat angle cut-laminated hfr for LF 20x33 stone grey we can offer you a price of 5,40 EUR per piece. The more you buy, the cheaper the article will be.
We also offer individual prices for your needs. You can get an offer by using the form Wholesale Inquiry.