Hager LF2002009016 cable routing duct made of PVC LF 20x20 mm traffic white content_copy

The LF2002009016 cable routing duct from Hager is an installation duct made of polyvinyl chloride (PVC) with dimensions of 20 mm width, 20 mm height, and a length of 2000 mm. It is finished in traffic white (RAL 9016) and is designed for the protected installation of cables and wiring in indoor environments. The PVC material ensures high durability and allows for easy installation due to its low weight. The duct is suitable for structured cabling systems in offices and residential buildings.

Applications
This duct is intended for indoor use and is particularly suitable for the installation of electrical and data wiring in office and residential buildings. It is not designed for outdoor use or for areas with increased requirements for fire protection or functional integrity. The operating temperature range is between -5 °C and 60 °C, making it suitable for normal indoor conditions.

Functions and Features in Detail
The duct features a usable internal cross-section of 228 mm², corresponding to a maximum capacity of one cable with a diameter of 11 mm at 50% fill. The cover is loose and pre-mounted, enabling easy installation and maintenance. There are no fixed or plug-in partition panels, so the duct is designed as a single chamber. Mounting is achieved via floor perforations, with the lower half of the duct equipped with pre-moulded mounting holes spaced at 125 mm intervals.

Technology Explained Simply
The PVC material is a robust, lightweight plastic commonly used for indoor installation systems. The impact resistance rating IK07 indicates that the duct is protected against mechanical impacts such as light shocks or pressure. The protection class IP30 means the duct is protected against solid foreign objects (minimum 2.5 mm) but not against water or dust. This makes it suitable for dry indoor environments, but not for damp or dusty conditions.

Compatibility and Accessories
Compatible accessories for use with this duct include the clamp socket L5111 and the end cap LF2002069016. The end cap is also available in traffic white (RAL 9016) and is designed to cover the ends of the duct. The clamp socket is used for secure cable fixation within the duct.

Installation and Mounting
Installation is carried out by securing the duct to the base using the pre-moulded floor mounting holes. The pre-mounted cover can be easily placed after cable installation. Connecting multiple duct sections requires additional connection elements, as there is no integrated coupling. Installation does not require special tools, but professional execution in accordance with applicable standards is required, particularly for fire protection and sound insulation measures.

Operational Advantages
The duct provides a clear, structured cable installation, enabling easy maintenance and expansion. The use of PVC ensures high resistance to mechanical stress and chemical influences in indoor environments. The pre-moulded mounting holes simplify installation and ensure uniform fastening. The traffic white colour blends well with typical indoor design aesthetics.

The item price shown refers to 2 meters Hager LF2002009016

General
Height	18 mm
Width	19 mm
Length	2000 mm
Useful cross section	228 mm²
Material	Plastic
Material quality	Polyvinyl chloride (PVC)
Surface protection	Untreated
Colour	White
RAL-number	9016
Number of permanent partitions	0
Number of plug-in partitions	0
Type of fastening	Bottom perforation
Cover model	Loose
Degree of protection (IP)	IP30
Impact strength	IK07
Working temperature	60 °C
Halogen free
Suitable for circuit integrity
Transparent
With cable fixing clip
With protection film
With duct connector
Delivery on roll
Pre-stamping
Antibacterial treatment

---