Gossen D708A KE7801 Cable Tester Set and Line Finder Kit

KE7801 - Cable tester set and fiber optic & copper line finder kit. KE7801 cable tester set and line finder kit, consisting of 2x KE7000 cable testers for detecting wiring errors in network and telecommunications cabling (RJ45, RJ11 and coax) and KE801 fiber optic & copper line finder kit for identifying cables and wire pairs, with link test and network port finder. Integrated Visual Fault Locator (VFL) for optical continuity testing. Supplied in a robust Kurth device case including adapter set RJ45 to coax (Z170A) (BNC / F-Female). Cable tester set: Tests telephone (RJ11), data (RJ45) and coax cables. Tests for continuity, interruption, short circuit, swap, shielding, multiple errors. Device pair shows errors on both sides. Detection of active switches at the far end of the line Surge protection up to 60 V DC Cable finder kit: Identification of cables and wire pairs Signal feed to active telephone and data lines Surge protection up to 120 V AC RJ45 connector, data port test and port finder function Visual fiber optic continuity test (VFL). The KE7801¿ cable tester and cable finder kit is the ideal basic equipment for all technicians when searching for cables and faults in telephone and data networks. The KE7000 are easy-to-use test devices for patch, LAN and telecommunications cabling and coaxial cables. Unshielded and shielded connection cables with twisted pairs (UTP and STP cables) in installed networks as well as patch cables can be tested and verified. Coaxial cables with BNC and F sockets can be tested for continuity using the RJ45 coax adapter. Errors that occur, such as mix-ups, interruptions, short circuits and shielding errors, are shown on the graphic displays of the devices. The KE7000 provides clear, fast and immediately evaluable status information on both sides for cable lengths of up to approx. 150 m. The cable finder kits consist of EASYTEST and PROBE and make it possible to find any type of cable, wire and wire pair in the shortest possible time without contact. The cable finders can be used for all types of cables such as telephone cables, bell cables, data cables of all classes, coaxial cables and voltage-free electrical cables and are protected against accidental contact with external voltage surges. The KE7801 set combines two KE7000 with the KE801 copper & fiber optic kit. Like the KE301 Classic Kit, this has an RJ11 plug, two crocodile clips and a continuity test via LED. In addition, like the KE701 Telco Kit, it has an RJ45 connector for detecting active network connections and assigning the active data port on the switch, for example. A continuity test with resistance-dependent tone enables a quick assessment of the cable condition. It is also overvoltage protected up to 120 V AC. The KE7801 set with the unique KE801 Copper & Fiber Optic Kit extends the range of functions to include a red light source,which enables visual continuity testing in fiber optic networks (VFL). The coaxial F-socket also enables tracking of coaxial cables. KE7801¿-¿reliable, robust and cost-effective..
Type: KE7801