EMTEC SSD 1TB 3D NAND X160 6,3 cm ( 2,5 inch ) internal bulk content_copy

The Emtec X160 SSD Power Plus is an internal 2.5-inch hard drive with a storage capacity of 1.024 GB, connected to the computer via a SATA interface. The device is designed for use in desktop and notebook systems where fast data access times and high reliability are required. The SSD is based on QLC 3D NAND technology, which enables high storage density and is suitable for use in office and home applications. The maximum sequential read speed reaches up to 520 MB/s, while the write speed reaches up to 500 MB/s. These values enable fast system boot times and smooth workflows when processing large files.

Applications
The SSD is designed for use in PCs and laptops, particularly in systems that require fast data transfer and stable performance. Due to the SATA interface, it is compatible with most modern motherboards and systems that support SATA III. The 2.5-inch form factor allows for easy installation in notebooks as well as in desktop computers with a corresponding drive bay. The drive is especially suitable for office applications, multimedia files, and system partitions, where high reliability and fast access times are important.

Functions and Features in Detail
The device includes several integrated functions to ensure data integrity and extend the SSD's lifespan. These include ECC (Error Correction Code), which detects and corrects errors in stored data, as well as static and dynamic wear leveling, which evenly distributes usage of the memory cells to ensure uniform wear. Bad block management monitors defective storage areas and redirects data to healthy areas. TRIM supports file system performance by freeing up data blocks no longer in use for reuse. S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) enables monitoring of the drive's status to detect potential failures in advance. Additionally, power-saving management is integrated to reduce power consumption when the SSD is not actively in use.

Technology Explained Simply
The SSD uses QLC 3D NAND technology, where each memory cell is assigned four bits, enabling higher storage density. The 3D structure means that memory cells are arranged in multiple layers, reducing space requirements and increasing capacity. The SATA interface (Serial ATA III) supports data transfer rates of up to 6 Gbit/s, although the actual speed is limited by the SSD technology. The specified speeds of 520 MB/s (read) and 500 MB/s (write) apply to sequential access, i.e., continuous data streams, such as when copying large files. The SSD's lifespan is stated as 2,000,000 hours, indicating high reliability.

Compatibility and Accessories
The SSD is compatible with systems featuring a SATA III interface and can be used in computers equipped with the corresponding connection. The 2.5-inch form factor allows use in notebooks and desktop PCs, provided a suitable drive bay is available. The SSD is delivered as a bulk product, meaning it is shipped without additional packaging or documentation.

Installation and Mounting
Installation involves inserting the SSD into a 2.5-inch drive bay in the computer. The SSD is connected to the motherboard via SATA data and power cables. The physical dimensions are 100 x 69.85 x 7.00 mm, which corresponds to the standard for 2.5-inch SSDs. Installation does not require special tools, but basic knowledge of hardware assembly is necessary. After physical installation, the SSD must be formatted and initialized in the operating system to prepare it for use.

Operational Advantages
The SSD offers significantly faster system boot times and shorter program loading times compared to traditional mechanical hard drives. The absence of mechanical movement results in lower power consumption, reduced noise levels, and higher mechanical stability, which increases lifespan. Integrated features such as TRIM and S.M.A.R.T. support system stability and enable proactive maintenance. The warranty period is 3 years, indicating the product's quality and reliability.

General
Memory capacity	1.024 GB
Construction type	2.5 inch
Interface	SATA III
Memory type	QLC 3D NAND
Sequential read speed	520 MB/s
Sequential write speed	500 MB/s
Reliability	2.000.000 Hours
Functions	ECC, static and dynamic wear-leveling, bad block management, TRIM, S.M.A.R.T., over-provisioning, power saving management

---