Underfloor ducts and accessories in Wiring systems
Underfloor ducts and accessories from Hager
 |
 Hager BKZM203 sponge rubber strips 20x3mm, self-adhesive
Foam rubber strip for absorbing expansion pressure, self-adhesive on the side profile for BK. Foam rubber strip for absorbing the expansion pressure acting on the floor duct flush with the screed when ...Lieske Part No.: 572512 Mfg Part No: BKZM203 |
22,37 EUR
 plus delivery charges
Delivery time on requestinfo_outline
|
 |
HAGER BKZN030 Nivelierschelle, z.Nivelierstiftaufnahme H = 45mm
Leveling clamp for leveling pins for BK from channel height including insulation bearing 45mm. Leveling clamp 30 mm for additional requirements for screed-flush floor channels, for supporting and ... Lieske Part No.: 958767 Mfg Part No: BKZN030 |
9,70 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Hager BKZN050 Nivelierschelle, z.Nivelierstiftaufnahme H = 65mm
Leveling clamp for leveling pins for BK from duct height including insulation bearing 65mm. Leveling clamp 50 mm for additional requirements for screed-flush floor ducts, for supporting and connecting ... Lieske Part No.: 583386 Mfg Part No: BKZN050 |
10,00 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Hager BKZNS100 leveling pin M8x100mm
Leveling pin M8x100mm for raising the screed-flush floor duct. Leveling pin M8 for screwing into additional leveling clamp or center support of the traverse, as a system accessory. Lieske Part No.: 1565518 Mfg Part No: BKZNS100 |
2,43 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Hager BKZNS120 leveling pin M8x120mm for mounting screed-flush flooring.
Leveling pin M8x120mm for raising the screed-flush floor duct. Leveling pin M8 for screwing into additional leveling clamp or center support of the traverse, as a system accessory. Lieske Part No.: 1882554 Mfg Part No: BKZNS120 |
2,62 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Hager BKZNS140 Nivelierstift M8x140, leveling height 140mm
Leveling pin M8x140mm for raising the screed-flush floor duct. Leveling pin M8 for screwing into additional leveling clamp or center support of the traverse, as a system accessory. Lieske Part No.: 936034 Mfg Part No: BKZNS140 |
3,76 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Hager BKZNS160 Nivelierstift M8x160, leveling height 160mm
Leveling pin M8x160mm for raising the screed-flush floor duct. Leveling pin M8 for screwing into additional leveling clamp or center support of the traverse, as a system accessory. Lieske Part No.: 242289 Mfg Part No: BKZNS160 |
5,54 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Hager BKZNS40 leveling pin M8x40 leveling height 40mm
Leveling pin M8x40mm for raising the screed-flush floor duct. Leveling pin M8 for screwing into additional leveling clamp or center support of the traverse, as a system accessory. Lieske Part No.: 1329789 Mfg Part No: BKZNS40 |
0,67 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
HAGER BKZNS45 Nivelierstift M8x45, leveling height 45mm
Leveling pin M8x45mm for raising the screed-flush floor duct. Leveling pin M8 for screwing into additional leveling clamp or center support of the traverse, as a system accessory. Lieske Part No.: 958931 Mfg Part No: BKZNS45 |
0,77 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
HAGER BKZNS50 Nivelierstift M8x50, leveling height 50mm
Leveling pin M8x50mm for raising the screed-flush floor duct. Leveling pin M8 for screwing into additional leveling clamp or center support of the traverse, as a system accessory. Lieske Part No.: 958981 Mfg Part No: BKZNS50 |
0,88 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
HAGER BKZNS60 Nivelierstift M8x60, leveling height 60mm
Leveling pin M8x60mm for raising the screed-flush floor duct. Leveling pin M8 for screwing into additional leveling clamp or center support of the traverse, as a system accessory. Lieske Part No.: 959561 Mfg Part No: BKZNS60 |
1,03 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Hager BKZNS65 leveling pin M8x65mm for mounting screed-flush floors.
Leveling pin M8x65mm for raising the screed-flush floor duct. Leveling pin M8 for screwing into additional leveling clamp or center support of the traverse, as a system accessory. Lieske Part No.: 1055591 Mfg Part No: BKZNS65 |
1,12 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Hager BKZNS85 Nivelierstift M8x85, leveling height 85mm
Leveling pin M8x85mm for raising the screed-flush floor duct. Leveling pin M8 for screwing into additional leveling clamp or center support of the traverse, as a system accessory. Lieske Part No.: 195298 Mfg Part No: BKZNS85 |
1,96 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Hager BKZNS90 leveling pin M8x90mm
Leveling pin M8x90mm for raising the screed-flush floor duct. Leveling pin M8 for screwing into additional leveling clamp or center support of the traverse, as a system accessory. Lieske Part No.: 1882555 Mfg Part No: BKZNS90 |
2,18 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Hager BKZNSD0 Insulating bearing for holding M8 leveling pins in trusses
Insulation bearing for holding M8 leveling pins in traverses for BK floor ducts. Insulation bearing for additional requirements for screed-flush floor ducts, for traverses with sleeve support screw, ... Lieske Part No.: 1882556 Mfg Part No: BKZNSD0 |
3,37 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Hager BKZSA200 earth, z.Erdanschluss the BK
Protective conductor for earth connection of the BK for screed-flush floors, length 200 mm, green-yellow. Protective conductor green-yellow, as connection lug 2.5 mm², length 200 mm, can be screwed ... Lieske Part No.: 941579 Mfg Part No: BKZSA200 |
9,80 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Hager BKZSAK00 protective conductor terminal f.BK
Earthing terminal for screed-flush floor duct BK with sealing option. Earthing terminal for fastening in the inner profile groove of screed-flush floor ducts with sealing option in accordance with DIN ... Lieske Part No.: 207651 Mfg Part No: BKZSAK00 |
6,73 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
HAGER BKZSH20 siphon f.Blinddeckel, max.20kg
Suction lifter for blind covers max. 20 kg for screed-flush floor duct BK. Suction lifter solid rubber suction cup load capacity up to approx. 20 kg, for lifting the cassette covers or the blind ... Lieske Part No.: 894203 Mfg Part No: BKZSH20 |
96,03 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
HAGER BKZSH30 siphon f.Blinddeckel, max.30kg
Suction lifter for blind covers max. 30 kg for screed-flush floor duct BK. Suction lifter 1-head plastic load capacity up to approx. 30 kg, for lifting the cassette covers or the blind covers of the ... Lieske Part No.: 894199 Mfg Part No: BKZSH30 |
395,60 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Hager BKZVS90 connection kit, F.90 ° branch Steel
Connector set for 90° branch made of steel to screed-flush floor duct BK.Connection set for on-site production of 90° branches for screed-flush installation ducts in accordance with DIN EN 50085-1 ... Lieske Part No.: 986050 Mfg Part No: BKZVS90 |
17,03 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Hager BSM012 mounting plate type 01 Keystone 19.3x14.8 double
Mounting plate type 01 Keystone 19.3x14.8 double Lieske Part No.: 1991039 Mfg Part No: BSM012 |
9,50 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Hager BSM032 mounting plate type 03 BTR 19.5x14.85 double
Mounting plate type 03 BTR 19.5x14.85 double Lieske Part No.: 1927213 Mfg Part No: BSM032 |
9,50 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Hager BSM052 mounting plate type 05 Large Keystone/ AMP 20.1x14.8 double
Mounting plate type 05 Large Keystone/ AMP 20.1x14.8 double Lieske Part No.: 1991040 Mfg Part No: BSM052 |
9,50 EUR
plus delivery charges
Delivery time on requestinfo_outline
|
 |
Hager BSM301 mounting plate type 030 D-Sub9 12.8x21 simple
Mounting plate type 030 D-Sub9 12.8x21 single Lieske Part No.: 1991041 Mfg Part No: BSM301 |
9,50 EUR
plus delivery charges
Delivery time on requestinfo_outline
|