Cable support systems, cable trays and accessories in Wiring systems
Cable support systems, cable trays and accessories from Niedax
 |
 Niedax 4013339561209 RTSDV 300 F cover for T-piece B304 mm galvanized with rotating bolt lock
Cover for T-piece, with captive pre-assembled rotary latch locks, height-independent cover for cable tray T-piece. Due to external influences, such as wind loads, use outdoors is only possible with ...Lieske Part No.: 463222 Mfg Part No: 4013339561209 Type: RTSDV 300 F |
304,76 EUR
 ≈ £255.08 | ≈ $341.03
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Niedax 4013339563609 RKB 150 F edge protection plate B142 mm galvanized
Kantenschutzblech, mit abgerundeten Kanten, zur Verstärkung des Kabelrinnenbodens, zum Schutz der Kabel am Übergang, einschließlich feuerverzinktem anteilmäßigem Befestigungszubehör. In ... Lieske Part No.: 1244213 Mfg Part No: 4013339563609 Type: RKB 150 F |
152,95 EUR
≈ £128.02 | ≈ $171.15
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
|
Niedax 4013339571901 NIED corner piece, 60x500 mm, KLE 60.503 F with perforated side rails galvanized
Corner piece, with continuously perforated and profiled side rails, with riveted rungs made of C-profiles with 11 mm slot width, for creating a horizontal right-angled outlet. Please order joint ... Lieske Part No.: 463124 Mfg Part No: 4013339571901 Type: KLE 60.503 F |
355,01 EUR
≈ £297.14 | ≈ $397.26
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
|
Niedax 4013339712717 MTCE 105.100 F 90° bend for MTC with welded connector 105x100 mm CITO
Bogen 90°, verstellbar, aus Stahldrähten, punktgeschweißt, mit jeweils einem angeschweißten Verbinder in den Seiten und im Boden zur Schnellbefestigung, ein Bauteil - drei Formstücke, ... Lieske Part No.: 1293892 Mfg Part No: 4013339712717 Type: MTCE 105.100 F |
138,51 EUR
≈ £115.93 | ≈ $154.99
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Niedax 4013339728954 2986/6 E5L anchor rail C-profile SW 18 mm 40x22x6000 mm perforated stainless steel
Anchor/profile rail model 2986, C-profile according to DIN EN 60715, perforated. Matching U-clamps (BU... and BUK...). The protective cap SKC 86 must be installed in areas where there is a personal ... Lieske Part No.: 463248 Mfg Part No: 4013339728954 Type: 2986/6 E5L |
4.308,35 EUR
≈ £3,606.09 | ≈ $4,821.04
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Niedax 4013339729005 VB50E5 longitudinal connector for U 50 and U 5050 profile stainless steel
Longitudinal connector, for producing longitudinally aligned straight connections of U 50 profiles and for producing special supporting structures, including proportional fastening accessories in ... Lieske Part No.: 463244 Mfg Part No: 4013339729005 Type: VB 50 E5 |
1.168,50 EUR
≈ £978.03 | ≈ $1,307.55
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
|
Niedax 4013339765102 RA 110.050 F reducer end piece 110x50 mm galvanized
Reduzier-/Abschlussstück, für den Abschluss von Kabelrinnenenden sowie zur Reduzierung und Erweiterung von durchlaufenden Kabelrinnen, einschließlich feuerverzinkten anteilmäßigem ... Lieske Part No.: 1239372 Mfg Part No: 4013339765102 Type: RA 110.050 F |
27,17 EUR
≈ £22.74 | ≈ $30.40
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Niedax 4013339768905 HSK 30 E3 profile clamp H30 mm stainless steel
Profile clamp for clamping connection to steel beam flanges. Dimensions (approx. dimensions) Clamp height H: 30 mm Width B: 50 mm Length L: 50 mm Material thickness t: 6 mm Mounting holes: 11 x 15 mm ... Lieske Part No.: 461034 Mfg Part No: 4013339768905 Type: HSK 30 E3 |
297,35 EUR
≈ £248.88 | ≈ $332.73
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Niedax 4013339840861 RA110.200E3 reducer/ending fitting 110x200 mm stainless steel
Reducing/terminating piece for closing cable tray ends and for reducing and extending continuous cable trays, including appropriate stainless steel fastening accessories. Can be used for: Cable trays ... Lieske Part No.: 318768 Mfg Part No: 4013339840861 Type: RA 110.200 E3 |
1.725,20 EUR
≈ £1,443.99 | ≈ $1,930.50
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Niedax 4013339840946 RA 110.400 E3 reducer end piece 110x400 mm Est, incl. accessories
Reducing/terminating piece for closing cable tray ends and for reducing and extending continuous cable trays, including appropriate stainless steel fastening accessories. Can be used for: Cable trays ... Lieske Part No.: 318769 Mfg Part No: 4013339840946 Type: RA 110.400 E3 |
2.306,60 EUR
≈ £1,930.62 | ≈ $2,581.09
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Niedax 4013339843107 ZCB 250 central suspension C-bracket 160x260 mm 0.6 kN galvanized
Central suspension, C-bracket for ceiling mounting (central suspension) using an M 10 threaded rod. The load-bearing capacity information only applies if the supporting surface is sufficiently ... Lieske Part No.: 460754 Mfg Part No: 4013339843107 Type: ZCB 250 |
445,55 EUR
≈ £372.93 | ≈ $498.57
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Niedax 4013339844661 RFSDDV 60.500 cover for drop and riser section 60x504 mm galvanized with turn latch
Cover for drop and riser, with captive pre-assembled rotary latch locks, cover for cable tray drop and riser with 60 mm edge height. Due to external influences, such as wind loads, use outdoors is ... Lieske Part No.: 318702 Mfg Part No: 4013339844661 Type: RFSDDV 60.500 |
95,76 EUR
≈ £80.15 | ≈ $107.16
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Niedax 4013339845460 RA 60.600 E3 reducer/ending piece 60x600 mm stainless steel, incl. accessories
Reducing/terminating piece for closing cable tray ends and for reducing and extending continuous cable trays, including appropriate stainless steel fastening accessories. VDE certified! Can be used ... Lieske Part No.: 318770 Mfg Part No: 4013339845460 Type: RA 60.600 E3 |
1.067,80 EUR
≈ £893.75 | ≈ $1,194.87
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Niedax 4013339849680 KRCF 60.525 F drop piece 90° vertical with yellow C-bracket 60x500 mm
Fall piece 90°, side rails made of hollow profiles, with welded rungs made of C-profile that are open at the bottom with a 16 mm slot width and continuous hole perforation, for creating vertical 90° ... Lieske Part No.: 463129 Mfg Part No: 4013339849680 Type: KRCF 60.525 F |
807,50 EUR
≈ £675.88 | ≈ $903.59
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Niedax 4013339851201 KRD100 F cover for cable tray B106 mm galvanized
Cover, without cover fastening clamp, for all-round cable ladders. Dimensions (approx. dimensions) H x W: 15 x 106 Delivery length: 3000 mm Material: Steel, hot-dip galvanized according to DIN EN ISO ... Lieske Part No.: 463132 Mfg Part No: 4013339851201 Type: KRD 100 F |
405,84 EUR
≈ £339.69 | ≈ $454.13
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
|
Niedax 4013339861767 RSBS 110.400 OV cable tray heavy 110x400x3000 mm t2.0 mm yellow, without connector
Kabelrinne, schwer, nach DIN IEC 61537, mit versetzt angeordneter durchgehender Bodenlochung zur stufenlosen Befestigung und Anbindung der Systembauteile sowie ungelochten Seitenwänden, ohne ... Lieske Part No.: 2144080 Mfg Part No: 4013339861767 Type: RSBS 110.400 OV |
1.348,05 EUR
≈ £1,128.32 | ≈ $1,508.47
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Niedax 4013339862771 RESS 110.500 bend 90° heavy 110x500 mm t2.0 mm ungalv. side rails
90° bend, heavy-duty design, with unperforated side rails but with connector holes for connection and with integrated joint connectors, for creating a 90° horizontally angled cable tray path, for ... Lieske Part No.: 318746 Mfg Part No: 4013339862771 Type: RESS 110.500 |
550,05 EUR
≈ £460.39 | ≈ $615.51
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Niedax 4013339862979 RTSS 110.500 T-piece 110x500 mm t2.0 mm with unperforated side rails, band galvanized
T-piece, heavy-duty design, with unperforated side rails but with connector holes for the connection and with integrated joint connectors, for the production of horizontal 90° T-outlets, for walkable ... Lieske Part No.: 460678 Mfg Part No: 4013339862979 Type: RTSS 110.500 |
695,40 EUR
≈ £582.05 | ≈ $778.15
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Niedax 4013339863303 RBADVSRS 100 cover for 45° bend B105 mm t4.5 mm galvanized with rotating latch closure
Non-slip cover R10 in accordance with DIN 51130, heavy-duty design, with fully riveted heavy aluminum checker plate and captive pre-assembled rotary latch locks, height-independent cover for the 45° ... Lieske Part No.: 460673 Mfg Part No: 4013339863303 Type: RBADVSRS 100 |
234,46 EUR
≈ £196.24 | ≈ $262.36
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Niedax 4013339872145 BL 30.65 sheet metal punch 30x65 mm blank
Sheet metal punch, special tool (in conjunction with the hand hydraulics, please order separately) for retrofitting cable feedthrough openings in cable trays. Incl. accessories, including adapter 3/4' ... Lieske Part No.: 467205 Mfg Part No: 4013339872145 Type: BL 30.65 |
6.479,95 EUR
≈ £5,423.72 | ≈ $7,251.06
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
|
|
Niedax 4013339886302 2934/4 GL6 support rail hat profile 35x15x4000 mm punched thick-layer passivated
Tragschiene Modell 2934, Hutschiene 35 mm, Tragschiene TS 35 ähnlich DIN EN 60715, gelocht. Verwendung für : Installationsgeräte und Reihenklemmen Abmessungen (ca. Maße) Höhe H x Breite B x ... Lieske Part No.: 1277678 Mfg Part No: 4013339886302 Type: 2934/4 GL6 |
1.036,64 EUR
≈ £867.67 | ≈ $1,160.00
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Niedax 4013339891344 RSLB 100 E5 splice strip
Joint strip, for cable trays, with two rows of fastening holes, required to increase floor stability, including proportional fastening accessories made of stainless steel, material no. 1.4571. For use ... Lieske Part No.: 466903 Mfg Part No: 4013339891344 Type: RSLB 100 E5 |
228,95 EUR
≈ £191.63 | ≈ $256.20
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Niedax 4013339892501 SVL 41 F rail connector bracket steel hot-dip galvanized DIN EN ISO 1461
Schienen-Verbinderlasche, mit Befestigungslochungen, zur kreuzenden Verbindung der Ankerschienen/Profilschienen mit gleicher Höhe im 90° Winkel zu Gestellen, Abhängungen und Kabelflächenrosten, ... Lieske Part No.: 156808 Mfg Part No: 4013339892501 Type: SVL 41 F |
8,26 EUR
≈ £6.91 | ≈ $9.24
Made to order · Delivery time approx. 20 workdaysinfo_outline
|
 |
Niedax 4013339898336 RSUS 60.600 OV cable tray heavy 60x600x3000 mm t2.0 mm ungalv. bandv. without connector
Cable tray, heavy, according to DIN EN 61537, unperforated, without connectors but with connector holes at both ends for connection, for the walkable cable tray system. Standard fittings can be used ... Lieske Part No.: 467256 Mfg Part No: 4013339898336 Type: RSUS 60.600 OV |
1.684,35 EUR
≈ £1,409.80 | ≈ $1,884.79
Made to order · Delivery time approx. 20 workdaysinfo_outline
|