Rhino Band IND, Vinyl, 9mm x 5.5m, black on white
Sales unit: 5 pieces
Lieske Part No.: 1314659

Rhino Band IND, Vinyl, 12mm x 5.5m, black on white
Sales unit: 5 pieces
Lieske Part No.: 1190087

Wire Marker Dispensers with Labels are compact and convenient cable marking systems. The dispenser allows you to write your own self-laminating labels using a permanent marker.
Write custom self-laminating labels with the Wire Marker Dispensers with Labels. This unique, ergonomically designed dispenser is made from durable plastic that protects the die-cut adhesive markers. It contains an adhesive tape with a clear vinyl film with a pressure-sensitive acrylic adhesive. The tape can withstand a wide temperature range of -40°C to 80°C, making it ideal for industrial electrical applications. Suitable for use on TVs, security and sprinkler systems, plugs, hoses, car alarms, tubing, vents, golf clubs and more.
Sales unit: 10 pieces
Lieske Part No.: 1427617

The STD Wire Marker Dispenser is a compact, convenient marking solution - available with pre-loaded number or color printed labels. This wire marker dispenser has 10 refillable compartments and comes complete with a full refill lead.
The wire marker dispenser features flip-top lids that allow you to peel and tear off precise lengths. This dispenser is pre-loaded with sharp, easy-to-read pre-printed numbers (0-9). It has 10 refillable compartments - each dispenser comes complete with a full refill lead.
Made from durable plastic, the dispenser protects wire markers from contamination and keeps them clean and dry. Its compact design fits conveniently in a pocket or toolbox - or can be hung from a tool bag or strap.
Sales unit: 25 pieces
Lieske Part No.: 2062360

Cable marking tape SDR is available as a refill roll for the STD cable marker dispenser as individual numbers, letters or symbols.
Use the cable marking tape refill roll to easily identify terminal blocks, strips, panel wires or switchgear for maintenance and repair. This thin, conformable tape is printed with easy-to-read characters. Made from polyester, the tape is resistant to tarnish, oil, solvents and water. Ideal for phase identification on large or small wires/cables, hoses and spare parts. It is compatible with STD cable markers, which allow for quick and easy use.
Sales unit: 5 pieces
Lieske Part No.: 1332724

Cable marking tape SDR is available as a refill roll for the STD cable marker dispenser as individual numbers, letters or symbols.
Use the cable marking tape refill roll to easily identify terminal blocks, strips, panel wires or switchgear for maintenance and repair. This thin, conformable tape is printed with easy-to-read characters. Made from polyester, the tape is resistant to tarnish, oil, solvents and water. Ideal for phase identification on large or small wires/cables, hoses and spare parts. It is compatible with STD cable markers, which allow for quick and easy use.
Lieske Part No.: 1313455

3MT BumponT SJ5012BL elastic buffers, 56 pieces per mini pack, are self-adhesive, cylindrical elastic buffers with a flat surface, 12.7 mm wide and 3.5 mm high. These black elastic buffers are non-slip and can withstand pressure loads.
3MT BumponT SJ5012BL elastic buffers, 56 pieces per mini pack, can be used in the home or at the workplace as device feet, stop buffers or spacers. These elastic buffers made of polyurethane are plasticizer-free, self-adhesive and extremely non-slip and do not leave scratches or marks on the surface. The cylindrical flat surface ensures excellent pressure load tolerance and slip resistance. They are easy to apply thanks to 3M pressure-sensitive adhesive, remain soft and flexible. They dampen vibrations and noise from small household appliances, objects and electronic devices. Bumpon can be used as spacers to align picture frames or during transport to avoid direct contact between products. They can also be used as bumpers for cabinet doors, doors, flaps, etc. to protect your product from dents, wear and tear, and to dampen vibrations and noise. They can be used as non-slip device feet on the bottom of small devices. Bumpon protect surfaces from scratches, damage and dents. Ideal for electronic devices such as mobile and landline phones, electronic cabinets, keyboards, foot pedals, scales, clocks, speakers, stereo systems, musical instruments, DVD players and computers.
Lieske Part No.: 1595489

The ball marker with an extended range of 1.5 m was specially developed for locating flush-mounted facilities that are hidden by embankments. It is attached to the underside of non-metallic flaps or covers above flush-mounted facilities. This self-aligning marker is used to clearly identify facilities. In addition, the iD version enables data to be written/read to/from the marker.
The green 3MTEMS iD ball marker - wastewater makes marking and subsequently locating underground sewage pipes extremely easy. It can be located up to a maximum depth of 1.20 meters, is insensitive to minerals, chemicals and temperature changes and is therefore suitable for any type of soil. The free-floating design in a waterproof PE ball ensures that the marker always aligns itself exactly horizontally, regardless of the installation position. The liquid inside the ball is a mixture of water and propylene glycol, which is biodegradable and harmless to humans, fauna and flora. The electronic markers are considered the most reliable method of marking existing or newly installed facilities - even under snow. Their function is not affected by metal ducts or pipes, fences or high-voltage lines. The EMS iD markers are delivered with an individual, pre-programmed serial number. This serial number is also attached to the marker in the form of a removable, self-adhesive sticker with a barcode and can be stuck directly into the cable/site plan. When the ball marker receives the 'read' signal from a cable locator, it transmits the information previously stored in it. The iD markers can be programmed temporarily or permanently to store user-defined information such as cable or joint data, type of application or other important details. After this data has been read out by the locator, it can be transferred to a PC via a serial RS232 connection. These active iD ball markers are also compatible with older, passive markers.
Sales unit: 30 pieces
Lieske Part No.: 1313096

The ball marker with an extended range of 1.5 m was specially developed for locating flush-mounted facilities that are hidden by embankments. It is attached to the underside of non-metallic flaps or covers above flush-mounted facilities. This self-aligning marker is used to clearly identify facilities. In addition, the iD version enables data to be written/read in/from the marker.
The orange-black EMS iD ball marker - broadband cable makes marking and subsequently locating underground cable lines extremely easy. It can be located up to a maximum depth of 1.20 meters, is insensitive to minerals, chemicals and temperature changes and is therefore suitable for any type of soil. The free-floating design in a waterproof PE ball ensures that the marker always aligns itself exactly horizontally, regardless of the installation position. The liquid inside the ball is a mixture of water and propylene glycol, which is biodegradable and harmless to humans, fauna and flora. The electronic markers are considered the most reliable method of marking existing or newly installed facilities - even under snow. Their function is not affected by metal ducts or pipes, fences or high-voltage lines. The EMS iD markers are delivered with an individual, pre-programmed serial number. This serial number is also attached to the marker in the form of a removable, self-adhesive sticker with a barcode and can be stuck directly into the cable/site plan. When the ball marker receives the 'read' signal from a cable locator, it transmits the information previously stored in it. The iD markers can be programmed temporarily or permanently to store user-defined information such as cable or joint data, type of application or other important details. After this data has been read out by the locator, it can be transferred to a PC via a serial RS232 connection. These active iD ball markers are also compatible with older, passive markers.
Sales unit: 30 pieces
Lieske Part No.: 825389

The ball marker with an extended range of 1.5 m was specially developed for locating flush-mounted facilities that are hidden behind embankments. It is attached to the underside of non-metallic flaps or covers above flush-mounted facilities. This self-aligning marker is used to clearly identify facilities. In addition, the iD version enables data to be written/read to/from the marker.
The purple EMS iD ball marker - General makes marking and thus later locating underground lines, sleeves, pipes and cables extremely easy. It can be located up to a maximum depth of 1.20 meters, is insensitive to minerals, chemicals and temperature changes and is therefore suitable for any type of soil. The free-floating design in a waterproof PE ball ensures that the marker always aligns itself exactly horizontally, regardless of the installation position. The liquid inside the ball is a mixture of water and propylene glycol, which is biodegradable and harmless to humans, fauna and flora. The electronic markers are considered the most reliable method of marking existing or newly installed facilities - even under snow. Their function is not affected by metal channels or pipes, fences or high-voltage lines. The EMS iD markers are delivered with an individual, pre-programmed serial number. This serial number is also attached to the marker in the form of a removable, self-adhesive sticker with a barcode and can be stuck directly into the cable/site plan. If the ball marker receives the 'read' signal from a cable locator, it transmits the information previously stored in it. The iD markers can be programmed temporarily or permanently to store user-defined information such as cable or joint data, type of application or other important details. Once this data has been read out using the tracking device, it can be transferred to a PC via a serial RS232 connection. These active iD ball markers are also compatible with older, passive markers.
Sales unit: 30 pieces
Lieske Part No.: 2056097

OTS40T3 Terminal cover snap-on mounting transparent plastic
Lieske Part No.: 472913

Cable marking sheet for self-labeling, 3 markers / sheet, dimensions 69 x 25 x 19mm
Sales unit: 100 pieces
Lieske Part No.: 1425141

Cable marking sheet for self-labeling, 3 markers / sheet, dimensions 127 x 25 x 25mm
Sales unit: 100 pieces
Lieske Part No.: 1425142

Labeling strip set, self-adhesive plastic strips and A4 paper labeling sheet for inserting into plastic strips, width 215mm, set of 9 pieces
Lieske Part No.: 560036

Lieske Part No.: 887428

Conductor and cable markings simplify installation and maintenance and help with troubleshooting.
Lieske Part No.: 303251

Barrier tape red/white
Lieske Part No.: 819826

Warning tape with monolingual print: Attention Cable
Lieske Part No.: 833181

Warning tape with monolingual print: Attention telecommunications cables
Sales unit: 10 pieces
Lieske Part No.: 388401

Warning tape with monolingual print: Attention high voltage cable
Sales unit: 10 pieces
Lieske Part No.: 436274

Sealing pliers with strap closure, 8 mm Ø, length 105 mm
Lieske Part No.: 224424

Engravings for seal stamps up to 3 letters
Lieske Part No.: 687500

Engravings for seal stamps each additional letter
Lieske Part No.: 938143

Plastic seal, Ø 9 mm, grey, 1000 pieces
Sales unit: 1000 pieces
Lieske Part No.: 994222

Plastic seal, Ø 10 mm, orange, 1000 pieces
Sales unit: 1000 pieces
Lieske Part No.: 661249

Plastic seal, Ø 12 mm, grey, 1000 pieces
Sales unit: 1000 pieces
Lieske Part No.: 722358

Model: 140752 Package: 1 MTR
Lieske Part No.: 593328

Type: 140754
Sales unit: 1 pc
Lieske Part No.: 530962

Model: 140758 Package: 1 PC.
Lieske Part No.: 340584

Wire lead seal, Ø 8 mm, with cast-in spiral wire, 200 mm long, approx. 450 pieces, 1 kg
Lieske Part No.: 309898

Wire lead seal, Ø 10 mm, with cast-in spiral wire, 200 mm long, approx. 260 pieces, 1 kg
Lieske Part No.: 707814

Wire lead seal, Ø 12 mm, with cast-in spiral wire, 200 mm long, approx. 150 pieces, 1 kg
Lieske Part No.: 772700

Sealing wire, coil: 1/2 kg = approx. 115 m, with a diameter of 0.5x0.5 mm, rust-proof, galvanized steel wire
Lieske Part No.: 571888

Sealing wire, coil: 1 kg = approx. 230 m, with a diameter of 0.5x0.5 mm, rust-proof, galvanized steel wire
Lieske Part No.: 154479

Sealing wire, coil: 1/2 kg = approx. 190 m, with a diameter of 0.5x0.3 mm, rust-proof, galvanized steel wire
Lieske Part No.: 493752

Sealing wire, coil: 1 kg = approx. 380 m, with a diameter of 0.5x0.3 mm, rust-proof, galvanized steel wire
Lieske Part No.: 553058

Plastic-coated sealing wire, 100 m reel, blue, with a diameter of 0.5x0.6 mm, iron wire
Lieske Part No.: 722385

Conductor marking, the self-adhesive film symbols for marking bare and insulated conductors, housings, control cabinets and devices are supplied in various sizes on cards for quick application. The symbols comply with the standards DIN40 009, DIN 40 011 and IEC. Material: Self-adhesive PVC film with lamination, 0.10 mm thick. Temperature resistant from -30°C to +100°C, dirt-repellent, permanent adhesive strength. Ø-12.5 mm. Design: Outer conductor 1, black, pieces per sheet: 10, PU: 1.
Lieske Part No.: 439094

Conductor marking, the self-adhesive film symbols for marking bare and insulated conductors, housings, control cabinets and devices are supplied in various sizes on cards for quick application. The symbols comply with the standards DIN40 009, DIN 40 011 and IEC. Material: Self-adhesive PVC film with lamination, 0.10 mm thick. Temperature resistant from -30°C to +100°C, dirt-repellent, permanent adhesive strength. Ø-12.5 mm. Design: Outer conductor 2, black, pieces per sheet: 10, PU: 1.
Lieske Part No.: 461587

Conductor marking, the self-adhesive film symbols for marking bare and insulated conductors, housings, control cabinets and devices are supplied in various sizes on cards for quick application. The symbols comply with the standards DIN40 009, DIN 40 011 and IEC. Material: Self-adhesive PVC film with lamination, 0.10 mm thick. Temperature resistant from -30°C to +100°C, dirt-repellent, permanent adhesive strength. Ø-12.5 mm. Design: Outer conductor 3, black, pieces per sheet: 10, PU: 1.
Lieske Part No.: 345982

Conductor marking, the self-adhesive film symbols for marking bare and insulated conductors, housings, control cabinets and devices are supplied in various sizes on cards for quick application. The symbols comply with the standards DIN40 009, DIN 40 011 and IEC. Material: Self-adhesive PVC film with lamination, 0.10 mm thick. Temperature resistant from -30°C to +100°C, dirt-repellent, permanent adhesive strength. Ø-12.5 mm. Design: Neutral conductor N, blue, pieces per sheet: 10, PU: 1.
Lieske Part No.: 524775

Conductor marking, the self-adhesive film symbols for marking bare and insulated conductors, housings, control cabinets and devices are supplied in various sizes on cards for quick application. The symbols comply with the standards DIN40 009, DIN 40 011 and IEC. Material: Self-adhesive PVC film with lamination, 0.10 mm thick. Temperature resistant from -30°C to +100°C, dirt-repellent, permanent adhesive strength. Ø-12.5 mm. Design: PE protective conductor, green-yellow, pieces per sheet: 10, PU: 1.
Lieske Part No.: 429986

Conductor marking, the self-adhesive film symbols for marking bare and insulated conductors, housings, control cabinets and devices are supplied in various sizes on cards for quick application. The symbols comply with the standards DIN40 009, DIN 40 011 and IEC. Material: Self-adhesive PVC film with lamination, 0.10 mm thick. Temperature resistant from -30°C to +100°C, dirt-repellent, permanent adhesive strength. Ø-12.5 mm. Design: Neutral conductor protective function, pieces per sheet: 10, PU: 1.
Lieske Part No.: 577072

Conductor marking, the self-adhesive film signs for marking bare and insulated conductors, housings, control cabinets and devices are supplied in various sizes on cards for quick application. The signs comply with the standards DIN40 009, DIN 40 011 and IEC. Material: Self-adhesive PVC film with lamination, 0.10 mm thick. Temperature resistant from -30°C to +100°C, dirt-repellent, permanent adhesive strength. Ø-12.5 mm. Design: Earth, pieces per sheet: 10, PU: 1.
Lieske Part No.: 985053

Conductor marking, the self-adhesive film symbols for marking bare and insulated conductors, housings, control cabinets and devices are supplied in various sizes on cards for quick application. The symbols comply with the standards DIN40 009, DIN 40 011 and IEC. Material: Self-adhesive PVC film with lamination, 0.10 mm thick. Temperature-resistant from -30°C to +100°C, dirt-repellent, permanent adhesive strength. Ø-12.5 mm. Design: Earth, not in accordance with DIN 40 011, pieces per sheet: 10, PU: 1.
Lieske Part No.: 900621

Self-laminating cable markers for simple, quick and permanent cable marking. Cable markers for simple, quick and permanent cable marking. Clear PV 006, self-adhesive soft PVC film, 0.08 mm thick. Protects the writing field from mechanical influences. The marker consists of a patented and transparent pressure part, white writing field, transparent protective part. Temperature resistant from -30°C to +120°C, permanent adhesive strength, high UV resistance. Resistant to dirt, water, alcohol, petroleum-based oils. Can be written on with pencil, ballpoint pen, printer, etc. Bag packaging. Design: Writing field: 25x25 mm, maximum cable diameter 14 mm, pieces per block: 64, length: 75 mm, pack: 1
Lieske Part No.: 537030

Self-laminating cable markers for simple, quick and permanent cable marking. Cable markers for simple, quick and permanent cable marking. Clear PV 006, self-adhesive soft PVC film, 0.08 mm thick. Protects the writing field from mechanical influences. The marker consists of a patented and transparent pressure part, white writing field, transparent protective part. Temperature resistant from -30°C to +120°C, permanent adhesive strength, high UV resistance. Resistant to dirt, water, alcohol, petroleum-based oils. Can be written on with pencil, ballpoint pen, printer, etc. Bag packaging. Design: Writing field: 25x25 mm, maximum cable diameter 38 mm, pieces per block: 32, length: 150 mm, pack: 1
Lieske Part No.: 364578

Lieske Part No.: 1093355

Self-laminating cable markers for simple, quick and permanent cable marking. Cable markers for simple, quick and permanent cable marking. Clear PV 006, self-adhesive soft PVC film, 0.08 mm thick. Protects the writing field from mechanical influences. The marker consists of a patented and transparent pressure part, white writing field, transparent protective part. Temperature resistant from -30°C to +120°C, permanent adhesive strength, high UV resistance. Resistant to dirt, water, alcohol, petroleum-based oils. Can be written on with pencil, ballpoint pen, printer, etc. Bag packaging. Design: Sheet: 13x21 mm, Maximum cable diameter 7 mm, Pieces per block: 48, Length: 37 mm, PU: 1
Lieske Part No.: 672802

Lieske Part No.: 1096152