The nail anchor N can be used for multiple fastenings of non-load-bearing systems in areas with highly corrosive influences in cracked and non-cracked concrete and combines the advantages of a bolt anchor with even simpler installation.
The nail anchor only needs to be driven into the drill hole. The subsequent application of a torque is not necessary. When the load occurs, the nail anchor expands automatically and anchors itself in the drill hole.
Sales unit: 50 pieces
Lieske Part No.: 346790

Bolt anchor BZ3 for anchoring medium to heavy loads in cracked or non-cracked concrete. Suitable for high loads with small edge and axis distances. For hammering in.
European Technical Assessment ETA-19/0619, including characteristic values under fire exposure up to fire resistance period R 120.
Proof of suitability for seismic impacts, categories C1 and C2.
Shock approval from the Federal Office for Civil Protection, Bern, Switzerland.
Sales unit: 50 pieces
Lieske Part No.: 2069878

Bolt anchor BZ3 for anchoring medium to heavy loads in cracked or non-cracked concrete. Suitable for high loads with small edge and axis distances. For hammering in.
European Technical Assessment ETA-19/0619, including characteristic values under fire exposure up to fire resistance period R 120.
Proof of suitability for seismic impacts, categories C1 and C2.
Shock approval from the Federal Office for Civil Protection, Bern, Switzerland.
Sales unit: 50 pieces
Lieske Part No.: 2069879

Bolt anchor BZ3 for anchoring medium to heavy loads in cracked or non-cracked concrete. Suitable for high loads with small edge and axis distances. For hammering in.
European Technical Assessment ETA-19/0619, including characteristic values under fire exposure up to fire resistance period R 120.
Proof of suitability for seismic impacts, categories C1 and C2.
Shock approval from the Federal Office for Civil Protection, Bern, Switzerland.
Sales unit: 50 pieces
Lieske Part No.: 2069880

Bolt anchor BZ3 for anchoring medium to heavy loads in cracked or non-cracked concrete. Suitable for high loads with small edge and axis distances. For hammering in.
European Technical Assessment ETA-19/0619, including characteristic values under fire exposure up to fire resistance period R 120.
Proof of suitability for seismic impacts, categories C1 and C2.
Shock approval from the Federal Office for Civil Protection, Bern, Switzerland.
Sales unit: 50 pieces
Lieske Part No.: 2069881

Bolt anchor BZ3 for anchoring medium to heavy loads in cracked or non-cracked concrete. Suitable for high loads with small edge and axis distances. For hammering in.
European Technical Assessment ETA-19/0619, including characteristic values under fire exposure up to fire resistance period R 120.
Proof of suitability for seismic impacts, categories C1 and C2.
Shock approval from the Federal Office for Civil Protection, Bern, Switzerland.
Sales unit: 50 pieces
Lieske Part No.: 2069882

Bolt anchor BZ3 for anchoring medium to heavy loads in cracked or non-cracked concrete. Suitable for high loads with small edge and axis distances. For hammering in.
European Technical Assessment ETA-19/0619, including characteristic values under fire exposure up to fire resistance period R 120.
Proof of suitability for seismic impacts, categories C1 and C2.
Shock approval from the Federal Office for Civil Protection, Bern, Switzerland.
Sales unit: 50 pieces
Lieske Part No.: 2069883

Bolt anchor BZ3 for anchoring medium to heavy loads in cracked or non-cracked concrete. Suitable for high loads with small edge and axis distances. For hammering in.
European Technical Assessment ETA-19/0619, including characteristic values under fire exposure up to fire resistance period R 120.
Proof of suitability for seismic impacts, categories C1 and C2.
Shock approval from the Federal Office for Civil Protection, Bern, Switzerland.
Sales unit: 50 pieces
Lieske Part No.: 2069884

Bolt anchor BZ3 for anchoring medium to heavy loads in cracked or non-cracked concrete. Suitable for high loads with small edge and axis distances. For hammering in.
European Technical Assessment ETA-19/0619, including characteristic values under fire exposure up to fire resistance period R 120.
Proof of suitability for seismic impacts, categories C1 and C2.
Shock approval from the Federal Office for Civil Protection, Bern, Switzerland.
Sales unit: 50 pieces
Lieske Part No.: 2069885

Bolt anchor BZ3 for anchoring medium to heavy loads in cracked or non-cracked concrete. Suitable for high loads with small edge and axis distances. For hammering in.
European Technical Assessment ETA-19/0619, including characteristic values under fire exposure up to fire resistance period R 120.
Proof of suitability for seismic impacts, categories C1 and C2.
Shock approval from the Federal Office for Civil Protection, Bern, Switzerland.
Sales unit: 25 pieces
Lieske Part No.: 2069709

Bolt anchor BZ3 for anchoring medium to heavy loads in cracked or non-cracked concrete. Suitable for high loads with small edge and axis distances. For hammering in.
European Technical Assessment ETA-19/0619, including characteristic values under fire exposure up to fire resistance period R 120.
Proof of suitability for seismic impacts, categories C1 and C2.
Shock approval from the Federal Office for Civil Protection, Bern, Switzerland.
Sales unit: 25 pieces
Lieske Part No.: 2069710

Bolt anchor BZ3 for anchoring medium to heavy loads in cracked or non-cracked concrete. Suitable for high loads with small edge and axis distances. For hammering in.
European Technical Assessment ETA-19/0619, including characteristic values under fire exposure up to fire resistance period R 120.
Proof of suitability for seismic impacts, categories C1 and C2.
Shock approval from the Federal Office for Civil Protection, Bern, Switzerland.
Sales unit: 25 pieces
Lieske Part No.: 2069711

Bolt anchor BZ3 for anchoring medium to heavy loads in cracked or non-cracked concrete. Suitable for high loads with small edge and axis distances. For hammering in.
European Technical Assessment ETA-19/0619, including characteristic values under fire exposure up to fire resistance period R 120.
Proof of suitability for seismic impacts, categories C1 and C2.
Shock approval from the Federal Office for Civil Protection, Bern, Switzerland.
Sales unit: 25 pieces
Lieske Part No.: 2069712

Bolt anchor BZ3 for anchoring medium to heavy loads in cracked or non-cracked concrete. Suitable for high loads with small edge and axis distances. For hammering in.
European Technical Assessment ETA-19/0619, including characteristic values under fire exposure up to fire resistance period R 120.
Proof of suitability for seismic impacts, categories C1 and C2.
Shock approval from the Federal Office for Civil Protection, Bern, Switzerland.
Sales unit: 25 pieces
Lieske Part No.: 2069713

Bolt anchor BZ3 for anchoring medium to heavy loads in cracked or non-cracked concrete. Suitable for high loads with small edge and axis distances. For hammering in.
European Technical Assessment ETA-19/0619, including characteristic values under fire exposure up to fire resistance period R 120.
Proof of suitability for seismic impacts, categories C1 and C2.
Shock approval from the Federal Office for Civil Protection, Bern, Switzerland.
Sales unit: 20 pieces
Lieske Part No.: 2069714

Bolt anchor BZ3 for anchoring medium to heavy loads in cracked or non-cracked concrete. Suitable for high loads with small edge and axis distances. For hammering in.
European Technical Assessment ETA-19/0619, including characteristic values under fire exposure up to fire resistance period R 120.
Proof of suitability for seismic impacts, categories C1 and C2.
Shock approval from the Federal Office for Civil Protection, Bern, Switzerland.
Sales unit: 50 pieces
Lieske Part No.: 2069715

Bolt anchor BZ3 for anchoring medium to heavy loads in cracked or non-cracked concrete. Suitable for high loads with small edge and axis distances. For hammering in.
European Technical Assessment ETA-19/0619, including characteristic values under fire exposure up to fire resistance period R 120.
Proof of suitability for seismic impacts, categories C1 and C2.
Shock approval from the Federal Office for Civil Protection, Bern, Switzerland.
Sales unit: 50 pieces
Lieske Part No.: 2069716

Bolt anchor BZ3 for anchoring medium to heavy loads in cracked or non-cracked concrete. Suitable for high loads with small edge and axis distances. For hammering in.
European Technical Assessment ETA-19/0619, including characteristic values under fire exposure up to fire resistance period R 120.
Proof of suitability for seismic impacts, categories C1 and C2.
Shock approval from the Federal Office for Civil Protection, Bern, Switzerland.
Sales unit: 50 pieces
Lieske Part No.: 2069886

Bolt anchor BZ3 for anchoring medium to heavy loads in cracked or non-cracked concrete. Suitable for high loads with small edge and axis distances. For hammering in.
European Technical Assessment ETA-19/0619, including characteristic values under fire exposure up to fire resistance period R 120.
Proof of suitability for seismic impacts, categories C1 and C2.
Shock approval from the Federal Office for Civil Protection, Bern, Switzerland.
Sales unit: 25 pieces
Lieske Part No.: 2069887

Bolzenanker BZ3 zur Verankerung mittelschwerer bis schwerer Lasten in gerissenem oder ungerissenem Beton. Geeignet für hohe Lasten mit geringen Rand- und Achsenabständen. Zum Einschlagen.
Europäisch Technische Bewertung ETA-19/0619, inklusive charakteristischer Werte unter Brandeinwirkung bis Feuerwiderstandsdauer R 120.
Nachweis der Eignung bei seismischen Einwirkungen, Kategorien C1 und C2.
Schockzulassung des Bundesamtes für Bevölkerungsschutz, Bern, Schweiz.
Sales unit: 100 pieces
Lieske Part No.: 843575

Easy hollow ceiling anchor for installation in prestressed concrete hollow ceiling slabs. When the screw or nut is tightened, the cone is released from the anchor sleeve and pulled into it. This causes the dowel to expand in the cavity and creates a positive connection. The hollow ceiling anchor can also be used if the expansion area is not in a hollow chamber.
The component can be attached using commercially available screws and threaded rods.
Sales unit: 25 pieces
Lieske Part No.: 619753

Schallschutz-Slipper zur Minimierung der Übertragung des
Trittschalls um bis zu 4 dB. Wird auf den Nivellierfuß der Kassetten geschoben. Durch den Schallschutz-Slipper kommt es zu einer Erhöhung der Mindesteinbautiefe um ca. 3 mm.
Sales unit: 4 pieces
Lieske Part No.: 683485

Lieske Part No.: 817957

Schlagdübel M6, Stahl, gehärtet, gal. verzinkt
Lieske Part No.: 636199

Schlagdübel M6, Stahl, gehärtet, gal. verzinkt
Lieske Part No.: 636200

The impact anchor is made of special electrical steel with a high carbon content. It is also highly hard, extremely break-resistant and ensures absolute safety during processing. The impact anchor must be inserted up to the collar in a setting iron with a 4 mm opening. Once correctly inserted, it remains in the setting iron and can be driven in with a hammer or a sledgehammer. The product can be used for quick installation, together with assembly tapes, of pipes on the raw concrete - applied before the screed. It is therefore a very cost-effective alternative to shooting.
Sales unit: 200 pieces
Lieske Part No.: 2022255

The impact anchor is made of special electrical steel with a high carbon content. It is also highly hard, extremely break-resistant and ensures absolute safety during processing. The impact anchor must be inserted up to the collar in a setting iron with a 4 mm opening. Once correctly inserted, it remains in the setting iron and can be driven in with a hammer or a sledgehammer. The product can be used for quick installation, together with assembly tapes, of pipes on the raw concrete - applied before the screed. It is therefore a very cost-effective alternative to shooting.
Sales unit: 200 pieces
Lieske Part No.: 2022271

Der RED Schlag-/Nageldübel ist eine perfekte Kombination aus Funktionalität und einer sehr guten Qualität. Durch die präzise Führung des Nagels kann man den Schlag-/Nageldübel einfach einschlagen. Der Dübel ist aus Nylon und somit reißfest sowie hitze- und kältebeständig.

Der verzinkte Nagel sichert eine hohe Korrosionsbeständigkeit. Der Schlag-/Nageldübel besitzt einen schlaggeschützten Kreuzschlitz und schützt somit vor einer Beschädigung des Antriebs. Die Einschlagsicherung verhindert ein vorzeitiges Spreizen.

Technische Daten
. Material Dübel/Nagel: Polyamid PA 6/Stahl, die Oberfläche des Nagels ist galvanisch verzinkt
. Zugfestigkeit: 500-700 N/mm2
. Halogenfrei
Sales unit: 200 pieces
Lieske Part No.: 2022474

The RED impact/nail dowel is a perfect combination of functionality and very good quality. The precise guidance of the nail makes it easy to hammer in the impact/nail dowel. The dowel is made of nylon and is therefore tear-resistant as well as heat and cold-resistant.
The galvanized nail ensures high corrosion resistance. The impact/nail dowel has an impact-protected cross slot and thus protects against damage to the drive. The impact protection prevents premature spreading.
Technical data
. Dowel/nail material: polyamide PA 6/steel, the surface of the nail is galvanized
. Tensile strength: 500-700 N/mm2
. Halogen-free
Sales unit: 200 pieces
Lieske Part No.: 2022476

The RED impact/nail dowel is a perfect combination of functionality and very good quality. The precise guidance of the nail makes it easy to hammer in the impact/nail dowel. The dowel is made of nylon and is therefore tear-resistant as well as heat and cold-resistant.
The galvanized nail ensures high corrosion resistance. The impact/nail dowel has an impact-protected cross slot and thus protects against damage to the drive. The impact protection prevents premature spreading.
Technical data
. Dowel/nail material: polyamide PA 6/steel, the surface of the nail is galvanized
. Tensile strength: 500-700 N/mm2
. Halogen-free
Sales unit: 100 pieces
Lieske Part No.: 2022477

The RED impact/nail dowel is a perfect combination of functionality and very good quality. The precise guidance of the nail makes it easy to hammer in the impact/nail dowel. The dowel is made of nylon and is therefore tear-resistant as well as heat and cold-resistant.
The galvanized nail ensures high corrosion resistance. The impact/nail dowel has an impact-protected cross slot and thus protects against damage to the drive. The impact protection prevents premature spreading.
Technical data
. Dowel/nail material: polyamide PA 6/steel, the surface of the nail is galvanized
. Tensile strength: 500-700 N/mm2
. Halogen-free
Sales unit: 200 pieces
Lieske Part No.: 2022478

The plasterboard impact anchor is suitable for mounting all common plasterboards. No special tools are required for this anchor, simply hammer it in horizontally. When screwed in, the anchor expands and provides a secure hold. Screws are not included. The material is steel.
Sales unit: 100 pieces
Lieske Part No.: 2022481

The plasterboard dowel is suitable for mounting all common plasterboards. The dowel can be easily screwed in using a screwdriver without pre-drilling. The thread is self-tapping. The dowel is suitable for screws with a diameter of 4-5 mm. Screws are not included.
Sales unit: 100 pieces
Lieske Part No.: 2022482

The practical RED BOXX Mini impact/nail/screw dowel is very versatile. The included dividers can be used individually and are flush with the lid.
In this version, you get the RED BOXX Mini with 50 each of RED plasterboard dowels BFM GKSD L and BFM GKSD as well as the RED impact/nail/screw dowel BFM SNSD.
With the RED BOXX Mini, also available as an empty version, you can also practically store your own small materials and pre-sort them perfectly for you. The transparent lid lets you see at a glance what you are storing in the RED BOXX Mini.
Another advantage of the RED BOXX Mini is that you can cleverly stack them on top of each other and connect them to each other using the intelligent click system. This turns a RED BOXX Mini into a whole system.
Contents
: 50 plasterboard impact dowels BFM GKSD L 12x30 mm
. 50 pieces of plasterboard dowels BFM GKSD 12.5x31 mm
. 50 pieces of impact/nail/screw dowels BFM SNSD 6x40 mm
Lieske Part No.: 2022484

Applications: For individual connection options
Supply includes: Nuts
Washers
Spring lock washers
Spring lock washers
Packs of: 6 pc(s).
EAN: 4028177444386
Customs tariff number: 73182900
eCl@ss 5.1: 27370302
eCl@ss 7.0: 27400613
ETIM 6.0: EC002349

To fit busbars: Type: Maxi-PLS 1600
Type: Maxi-PLS 2000
Type: Maxi-PLS 3200
Thread: M6
Length: 35 mm
Weight/pack: 0.06 kg
Lieske Part No.: 471918

Applications: For individual connection options
Supply includes: Nuts
Washers
Spring lock washers
Spring lock washers
Packs of: 6 pc(s).
EAN: 4028177444379
Customs tariff number: 73182900
eCl@ss 5.1: 27370302
eCl@ss 7.0: 27400613
ETIM 6.0: EC002349

To fit busbars: Type: Maxi-PLS 1600
Type: Maxi-PLS 2000
Type: Maxi-PLS 3200
Thread: M8
Length: 35 mm
Weight/pack: 0.11 kg
Lieske Part No.: 506282

Applications: For individual connection options
Supply includes: Nuts
Washers
Spring lock washers
Washers
Packs of: 8 pc(s).
EAN: 4028177606968
Customs tariff number: 73181900
eCl@ss 5.1: 27370302
eCl@ss 7.0: 27400613
ETIM 6.0: EC002349

To fit busbars: Type: Maxi-PLS 1600
Type: Maxi-PLS 2000
Type: Maxi-PLS 3200
Thread: M10
Length: 35 mm
Weight/pack: 0.26 kg
Lieske Part No.: 865530

Applications: For individual connection options
Supply includes: Nuts
Washers
Spring lock washers
Washers
Packs of: 8 pc(s).
EAN: 4028177606999
Customs tariff number: 73181900
eCl@ss 5.1: 27370302
eCl@ss 7.0: 27400613
ETIM 6.0: EC002349

To fit busbars: Type: Maxi-PLS 1600
Type: Maxi-PLS 2000
Type: Maxi-PLS 3200
Thread: M10
Length: 70 mm
Weight/pack: 0.39 kg
Lieske Part No.: 653657

Universal dowel TP0 5.5x16.5mm white Thorsman 100 pieces/pack. A range of colour-coded friction dowels for all installation situations. Colour Code System the sophisticated and protected colour code for easy selection of the dowel size. Systematic use of the colour code on dowels and packaging. Smooth surface for the best hold, double expansion, high load-bearing capacity even in plaster. With wings and collar dowel does not rotate and does not sink. Inner diameter at the collar larger than at the tip depth expansion. Applications: For installation situations with predominantly transverse forces. For tensile forces and when strong heat is generated, e.g. for fastening lighting equipment close to the ceiling, the metal dowels from the product range are preferable. Suitable for: concrete, natural stone, aerated concrete, lightweight clinker, hollow blocks, hollow bricks, solid bricks, cavity cladding. .. Material: PE-HD Temperature range: -50°C to +80°C.
Sales unit: 100 pieces
Lieske Part No.: 1851529

Dowel TP1 5.5x22mm. A range of colour-coded friction dowels for all installation situations. Colour Code System - the sophisticated and protected colour code for easy selection of dowel size. Systematic use of the colour code on dowels and packaging. Smooth surface for best hold, double expansion, high load capacity even in plaster. With wings and collar. Dowel does not rotate and does not sink. Inner diameter at the collar larger than at the tip. Depth expansion. Applications: For installation situations with predominantly transverse forces. For tensile forces and when high heat is generated, e.g. for fastening lighting equipment close to the ceiling, the metal dowels from the product range are preferable. Suitable for: Concrete, natural stone, aerated concrete, lightweight clinker, hollow blocks, hollow bricks, solid bricks, cavity cladding. Material: PE-HD Temperature range: -50°C to +80°C.
Sales unit: 100 pieces
Lieske Part No.: 1851573

The universal plugs with the unique color code.
indicates the diameter of Color.
The dowels are loose in the box or in part, molded ontological a
stock plate.
The dowels are designed so did the screws reinforced centers
are and the fixing is expanded into two . directions
Applicable are the anchors in concrete, stone, gas concrete, etc.,
drywall, for drilling diameter of 5 mm to 20 mm
for screw diameter of 3.5 mm to 16 mm. Type: TP5


Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 210018

Universal dowel TP 5.5X25 (bulk packaging 50,000 pieces). A range of colour-coded friction dowels for all installation situations. Colour Code System the sophisticated and protected colour code for easy selection of dowel size. Systematic use of the colour code on dowels and packaging. Smooth surface for best hold, double expansion, high load capacity even in plaster. With wings and collar dowel does not rotate and does not sink. Inner diameter at the collar larger than at the tip. Depth expansion. Applications: For installation situations with predominantly transverse forces. For tensile forces and when strong heat is generated, e.g. for fastening lighting equipment close to the ceiling, the metal dowels from the product range are preferable. Suitable for: concrete, natural stone, aerated concrete, lightweight clinker, hollow blocks, hollow bricks, solid bricks, cavity cladding. .. Material: PE-HD Temperature range: -50°C to +80°C.
Sales unit: 50000 pieces
Lieske Part No.: 1858993

Duebel TP2 red: Duebel: A range of colour-coded friction dowels for all installation situations. Applications: For installation situations with predominantly transverse forces. For tensile forces and where there is a lot of heat, e.g. for attaching lighting equipment close to the ceiling, the metal dowels from the product range are preferable. Suitable for: Concrete, natural stone, aerated concrete, lightweight clinker, hollow blocks, hollow bricks, solid bricks, cavity cladding. Advantages: Colour Code System the sophisticated and protected colour code for easy selection of the dowel size. Systematic use of the colour code on dowels and packaging. Smooth surface for best hold, double spread, high load-bearing capacity even in plaster, With wings and collar, dowel does not rotate or sink. Inner diameter at the collar larger than at the tip Deep expansion, avoids cracking in plastered or plastered walls. Material: PE-HD Temperature range: -50°C to +80°C.
Lieske Part No.: 1851159

The universal plugs with the unique color code. The color indicates the diameter. The dowels are loose in the box or in part, molded onto a plate available. The anchors are designed so that the screws are forcibly centered and the plug is spread in two directions. Used are the anchors in concrete, stone, gas concrete, etc., drywall, for drilling diameter from 5 mm to 2 mm screw diameter of 3.5 mm to
6 mm. Type:
3 2 Quantity:
ST.
Sales unit: 100 pieces
Lieske Part No.: 805411

Sales unit: 100 pieces
Lieske Part No.: 987791

Universal dowel TP2B 8x40mm brown Thorsman 100 pieces/pack. A range of colour-coded friction dowels for all installation situations. Colour Code System the sophisticated and protected colour code for easy selection of dowel size. Systematic use of the colour code on dowels and packaging. Smooth surface for best hold, double expansion, high load capacity even in plaster. With wings and collar dowel does not rotate and does not sink. Inner diameter at the collar larger than at the tip depth expansion. Applications: For installation situations with predominantly transverse forces. For tensile forces and when strong heat is generated, e.g. for fastening lighting equipment close to the ceiling, the metal dowels from the product range are preferable. Suitable for: concrete, natural stone, aerated concrete, lightweight clinker, hollow blocks, hollow bricks, solid bricks, cavity cladding. .. Material: PE-HD Temperature range: -50°C to +80°C.
Sales unit: 100 pieces
Lieske Part No.: 1859011

The massive, top anchor for driving into porous building materials without pre-drilling!
available in 2 versions, for Nail diameter of 1.2 mm to 3 mm.
Predominantly used for the fasten cable clamps TC and adjustable clamps PFSK on a variety of
substrates.
these plugs are color coded. Type: TCP1


Item: 100 ST.
Sales unit: 100 pieces
Lieske Part No.: 624654

Screw nail dowel TPS-5/20x50 nat (100). Dowel with screw nail for fastening channels, clamps, switches as well as window and door frames, lath dowels, are suitable for concrete, natural stone, aerated concrete, lightweight clinker, hollow blocks, hollow bricks, solid bricks and plasterboard. Advantage: no marking of the hole as the dowel is inserted through the workpiece to be fastened, quick assembly, fastening by hammering in the screw nail, loosening of the fastening by unscrewing the screw nail. Dowel is made of PA (polyamide), screw nail made of steel, temperature range: -40 to + 80°C.
Sales unit: 100 pieces
Lieske Part No.: 1852527

Screw nail dowel TPS-6/5x35 nat (100). Dowel with screw nail for fastening channels, clamps, switches as well as window and door frames, lath dowels, are suitable for concrete, natural stone, aerated concrete, lightweight clinker, hollow blocks, hollow bricks, solid bricks and plasterboard. Advantage: no marking of the hole as the dowel is inserted through the workpiece to be fastened, quick assembly, fastening by hammering in the screw nail, loosening of the fastening by unscrewing the screw nail. Dowel is made of PA (polyamide), screw nail made of steel, temperature range: -40 to + 80°C.
Lieske Part No.: 1852611

Screw nail dowel TPS-6/20x50 nat (100). Dowel with screw nail for fastening channels, clamps, switches as well as window and door frames, lath dowels, are suitable for concrete, natural stone, aerated concrete, lightweight clinker, hollow blocks, hollow bricks, solid bricks and plasterboard. Advantage: no marking of the hole as the dowel is inserted through the workpiece to be fastened, quick assembly, fastening by hammering in the screw nail, loosening of the fastening by unscrewing the screw nail. Dowel is made of PA (polyamide), screw nail made of steel, temperature range: -40 to + 80°C.
Sales unit: 100 pieces
Lieske Part No.: 1852540