Fasteners in Fixing hardware

Nut that is inserted into a mounting rail and enables connections with screws. Rail nut without spring, steel, hot-dip galvanized, M8, 6 mm thick.
Sales unit: 100 pieces
Lieske Part No.: 768304

For making metal frames with nVent CADDY Eristrut rails.
Lieske Part No.: 1317018

Nut that is inserted into a mounting rail and enables connections with screws. Rail nut without spring, steel, hot-dip galvanized, M10, 8 mm thick.
Sales unit: 100 pieces
Lieske Part No.: 352112

Nut that is inserted into a mounting rail and enables connections with screws. Rail nut without spring, steel, galvanized, M10, 8 mm thick.
Sales unit: 100 pieces
Lieske Part No.: 1316774

For making metal frames with nVent CADDY Eristrut rails.
Sales unit: 100 pieces
Lieske Part No.: 227580

For making metal frames with nVent CADDY Eristrut rails.
Sales unit: 100 pieces
Lieske Part No.: 1316775

Nut with short spring that is inserted into a mounting rail type C and enables connections with screws. For low mounting rail, hot-dip galvanized steel, M6.
Lieske Part No.: 657998

For making metal frames with nVent CADDY Eristrut rails. Spring allows easy installation.
Sales unit: 100 pieces
Lieske Part No.: 989231

Nut with short spring that is inserted into a mounting rail type C and enables connections with screws. For low mounting rail, hot-dip galvanized steel, M8.
Sales unit: 100 pieces
Lieske Part No.: 383772

For making metal frames with nVent CADDY Eristrut rails. Spring allows easy installation.
Sales unit: 100 pieces
Lieske Part No.: 570922

Nut with short spring that is inserted into a mounting rail type C and enables connections with screws. For low mounting rail, hot-dip galvanized steel, M10.
Sales unit: 100 pieces
Lieske Part No.: 902385

For making metal frames with nVent CADDY Eristrut rails. Spring allows easy installation.
Sales unit: 100 pieces
Lieske Part No.: 1317022

For making metal frames with nVent CADDY Eristrut rails. Spring allows easy installation.
Sales unit: 100 pieces
Lieske Part No.: 592865

Nut with long spring that is inserted into a type A mounting rail and enables connections with screws. For standard mounting rail, hot-dip galvanized steel, M6, 6 mm.
Sales unit: 100 pieces
Lieske Part No.: 934864

For making metal frames with nVent CADDY Eristrut rails. Spring allows easy installation.
Sales unit: 100 pieces
Lieske Part No.: 848038

Nut with long spring that is inserted into a type A mounting rail and enables connections with screws. For standard mounting rail, hot-dip galvanized steel, M8, 6 mm.
Sales unit: 100 pieces
Lieske Part No.: 315002

For making metal frames with nVent CADDY Eristrut rails. Spring allows easy installation.
Sales unit: 100 pieces
Lieske Part No.: 594440

Nut with long spring that is inserted into a type A mounting rail and enables connections with screws. For standard mounting rail, hot-dip galvanized steel, M10, 8 mm.
Sales unit: 100 pieces
Lieske Part No.: 505408

For making metal frames with nVent CADDY Eristrut rails. Spring allows easy installation.
Sales unit: 100 pieces
Lieske Part No.: 920449

For making metal frames with nVent CADDY Eristrut rails. Spring allows easy installation.
Lieske Part No.: 976064

For making metal frames with nVent CADDY Eristrut rails. Spring allows easy installation.
Sales unit: 100 pieces
Lieske Part No.: 1317026

Nut that is inserted into a mounting rail and enables connections with screws. Rail nut without spring, stainless steel, M6, 6 mm thick.
Sales unit: 100 pieces
Lieske Part No.: 1317019

Nut that is inserted into a mounting rail and enables connections with screws. Rail nut without spring, stainless steel, M8, 6 mm thick.
Sales unit: 100 pieces
Lieske Part No.: 1317017

Nut that is inserted into a mounting rail and enables connections with screws. Rail nut without spring, stainless steel, M10, 8 mm thick.
Sales unit: 100 pieces
Lieske Part No.: 1317015

For making metal frames with nVent CADDY Eristrut rails. Spring allows easy installation.
Sales unit: 100 pieces
Lieske Part No.: 280987

For making metal frames with nVent CADDY Eristrut rails. Spring allows easy installation.
Sales unit: 100 pieces
Lieske Part No.: 913878

For making metal frames with nVent CADDY Eristrut rails. Spring allows easy installation.
Sales unit: 100 pieces
Lieske Part No.: 753205

For making metal frames with nVent CADDY Eristrut rails. Spring allows easy installation.
Sales unit: 100 pieces
Lieske Part No.: 2094999

Nut with short spring that is inserted into a type C mounting rail and enables connections with screws. For low mounting rail, stainless steel 316, M10.
Sales unit: 100 pieces
Lieske Part No.: 1317021

Rail nut for C-profiles.
Sales unit: 100 pieces
Lieske Part No.: 946824

Rail nut for C-profiles.
Lieske Part No.: 2068193

Rail nut for C-profiles.
Sales unit: 100 pieces
Lieske Part No.: 642248

Rail nut for C-profiles.
Sales unit: 100 pieces
Lieske Part No.: 239174

Consists of two cast halves, nut and screw. Enables two mounting rails to be screwed back to back through the elongated holes.
Sales unit: 100 pieces
Lieske Part No.: 325502

Mounting rail for the production of trapezes, structures and bracing, type A. 2 meters of back-perforated, pre-galvanized mounting rail, 41 x 41 x 1.5 mm.
Sales unit: 10 pieces
Lieske Part No.: 681708

Mounting rail for the production of trapezes, structures and bracing, type A. 3 meters of back-perforated, pre-galvanized mounting rail, 41 x 41 x 1.5 mm.
Sales unit: 10 pieces
Lieske Part No.: 460438

Mounting rail for the production of trapezes, structures and bracing, type A. 6 meters of back-perforated, pre-galvanized mounting rail, 41 x 41 x 1.5 mm.
Sales unit: 10 pieces
Lieske Part No.: 816114

Mounting rail for the production of trapezes, structures and bracing, type C. 2 meters of back-perforated, pre-galvanized mounting rail, 21 x 41 x 1.5 mm.
Sales unit: 10 pieces
Lieske Part No.: 694728

Mounting rail for the production of trapezes, structures and bracing, type C. 3 meters of back-perforated, pre-galvanized mounting rail, 21 x 41 x 1.5 mm.
Lieske Part No.: 754967

Cold-formed rail, slotted hole. Mounting rails for medium to heavy loads. For individual fastening or for efficient construction of pipe and cable routing.
Sales unit: 10 pieces
Lieske Part No.: 257210

Mounting rail for the production of trapezes, structures and bracing, type A. 3 meters of back-perforated, hot-dip galvanized mounting rail, 41 x 41 x 1.5 mm.
Sales unit: 10 pieces
Lieske Part No.: 871318

Mounting rail for the production of trapezes, structures and bracing, type A. 6 meters of back-perforated, hot-dip galvanized mounting rail, 41 x 41 x 1.5 mm.
Sales unit: 10 pieces
Lieske Part No.: 636570

Back-to-back welded mounting rails provide a smooth and easily adjustable fixation along the entire length of the rail. Pressure clamps grip the mounting rail between the two lips and prevent it from turning over. Secure heavy-duty fastening system for cable tray, ventilation duct or pipe.
Lieske Part No.: 932462

Back-to-back welded mounting rails provide a smooth and easily adjustable fixation along the entire length of the rail. Pressure clamps grip the mounting rail between the two lips and prevent it from turning over. Secure heavy-duty fastening system for cable tray, ventilation duct or pipe.
Lieske Part No.: 160357

Back-to-back welded mounting rails provide a smooth and easily adjustable fixation along the entire length of the rail. Pressure clamps grip the mounting rail between the two lips and prevent it from turning over. Secure heavy-duty fastening system for cable tray, ventilation duct or pipe.
Lieske Part No.: 180772

Back-to-back welded mounting rails provide a smooth and easily adjustable fixation along the entire length of the rail. Pressure clamps grip the mounting rail between the two lips and prevent it from turning over. Secure heavy-duty fastening system for cable tray, ventilation duct or pipe.
Lieske Part No.: 664631

Back-to-back welded mounting rails provide a smooth and easily adjustable fixation along the entire length of the rail. Pressure clamps grip the mounting rail between the two lips and prevent it from turning over. Secure heavy-duty fastening system for cable tray, ventilation duct or pipe.
Lieske Part No.: 244357

Back-to-back welded mounting rails provide a smooth and easily adjustable fixation along the entire length of the rail. Pressure clamps grip the mounting rail between the two lips and prevent it from turning over. Secure heavy-duty fastening system for cable tray, ventilation duct or pipe.
Lieske Part No.: 333228

Back-to-back welded mounting rails provide a smooth and easily adjustable fixation along the entire length of the rail. Pressure clamps grip the mounting rail between the two lips and prevent it from turning over. Secure heavy-duty fastening system for cable tray, ventilation duct or pipe.
Lieske Part No.: 265555

Cold formed rail, slotted hole. Welded back to back.
Sales unit: 10 pieces
Lieske Part No.: 362466