The RED clamp bracket series made of polyamide PA 6 for one-hand installation is available with and without pre-assembled nail dowels. The clamp brackets replace cable ducts in ceiling and wall installation, for example, and are ideal for use in suspended ceilings. The clamp brackets are halogen and silicone-free and have a high level of bracket flexibility. Thanks to the impact- and splinter-resistant nylon (polyamide PA 6), safety during installation is a top priority.
Technical data
. Temperature resistance: 80 °C long-term, 130 °C short-term, -10 °C installation and ±40 °C use
. UV resistance: The products can be used under UV exposure (weathering) in dry, warm and humid climates for at least 5 years without the performance properties changing. This applies to outdoor use.
Sales unit: 100 pieces
Lieske Part No.: 2022752

The RED clamp bracket series made of polyamide PA 6 for one-hand installation is available with and without pre-assembled nail dowels. The clamp brackets replace cable ducts in ceiling and wall installation, for example, and are ideal for use in suspended ceilings. The clamp brackets are halogen and silicone-free and have a high level of bracket flexibility. Thanks to the impact- and splinter-resistant nylon (polyamide PA 6), safety during installation is a top priority.
Technical data
. Temperature resistance: 80 °C long-term, 130 °C short-term, -10 °C installation and ±40 °C use
. UV resistance: The products can be used under UV exposure (weathering) in dry, warm and humid climates for at least 5 years without the performance properties changing. This applies to outdoor use.
Sales unit: 50 pieces
Lieske Part No.: 2022753

The RED clamp bracket series made of polyamide PA 6 for one-hand installation is available with and without pre-assembled nail dowels. The clamp brackets replace cable ducts in ceiling and wall installation, for example, and are ideal for use in suspended ceilings. The clamp brackets are halogen and silicone-free and have a high level of bracket flexibility. Thanks to the impact- and splinter-resistant nylon (polyamide PA 6), safety during installation is a top priority.
Technical data
. Temperature resistance: 80 °C long-term, 130 °C short-term, -10 °C installation and ±40 °C use
. UV resistance: The products can be used under UV exposure (weathering) in dry, warm and humid climates for at least 5 years without the performance properties changing. This applies to outdoor use.
Sales unit: 200 pieces
Lieske Part No.: 2022754

The RED clamp bracket series made of polyamide PA 6 for one-hand installation is available with and without pre-assembled nail dowels. The clamp brackets replace cable ducts in ceiling and wall installation, for example, and are ideal for use in suspended ceilings. The clamp brackets are halogen and silicone-free and have a high level of bracket flexibility. Thanks to the impact- and splinter-resistant nylon (polyamide PA 6), safety during installation is a top priority.
Technical data
. Temperature resistance: 80 °C long-term, 130 °C short-term, -10 °C installation and ±40 °C use
. UV resistance: The products can be used under UV exposure (weathering) in dry, warm and humid climates for at least 5 years without the performance properties changing. This applies to outdoor use.
Sales unit: 100 pieces
Lieske Part No.: 2022755

The RED metal cable holders with functional integrity from the BFM-MSH series are available for 15 or 30 NYM 3x1.5mm2 cables. The cable holders are designed for quick and easy installation of several cables on the ceiling or wall. The diameter of the mounting hole is 6 mm.
Due to the high stability of the shape, the cable holder is ideal for use in suspended ceilings, even when exposed to heat.
Lieske Part No.: 2023187

The RED metal cable holders with functional integrity from the BFM-MSH series are available for 15 or 30 NYM 3x1.5mm2 cables. The cable holders are designed for quick and easy installation of several cables on the ceiling or wall. The diameter of the mounting hole is 6 mm.
Due to the high stability of the shape, the cable holder is ideal for use in suspended ceilings, even when exposed to heat.
Lieske Part No.: 2023188

The metal clamps are used for fastening pipes and cables to concrete. The material is steel, galvanized.
Technical data:
Hole size: LxW 4.5x6 mm
Lieske Part No.: 2023189

The metal clamps are used for fastening pipes and cables to concrete. The material is steel, galvanized.
Technical data:
Hole size: LxW 4.5x6 mm
Lieske Part No.: 2023190

The metal clamps are used for fastening pipes and cables to concrete. The material is steel, galvanized.
Technical data:
Hole size: LxW 4.5x6 mm
Lieske Part No.: 2023191

The metal clamps are used for fastening pipes and cables to concrete. The material is steel, galvanized.
Technical data:
Hole size: LxW 4.5x6 mm
Lieske Part No.: 2023192

The metal clamps are used for fastening pipes and cables to concrete. The material is steel, galvanized.
Technical data:
Hole size: LxW 5.5x7 mm
Lieske Part No.: 2023193

The metal clamps are used for fastening pipes and cables to concrete. The material is steel, galvanized.
Technical data:
Hole size: LxW 5.5x7 mm
Lieske Part No.: 2023194

The metal clamps are used for fastening pipes and cables to concrete. The material is steel, galvanized.
Technical data:
Hole size: LxW 5.5x7 mm
Lieske Part No.: 2023195

A special feature is the very quick laying of pipes and cables without dismantling the clamps, due to the pivoting legs. The spacer clamps are suitable for fastening lines, cables and empty pipes.
Lieske Part No.: 2023196

A special feature is the very quick laying of pipes and cables without dismantling the clamps, due to the pivoting legs. The spacer clamps are suitable for fastening lines, cables and empty pipes.
Lieske Part No.: 2023197

A special feature is the very quick laying of pipes and cables without dismantling the clamps, due to the pivoting legs. The spacer clamps are suitable for fastening lines, cables and empty pipes.
Lieske Part No.: 2023198

A special feature is the very quick laying of pipes and cables without dismantling the clamps, due to the pivoting legs. The spacer clamps are suitable for fastening lines, cables and empty pipes.
Lieske Part No.: 2023199

A special feature is the very quick laying of pipes and cables without dismantling the clamps, due to the pivoting legs. The spacer clamps are suitable for fastening lines, cables and empty pipes.
Lieske Part No.: 2023200

The metal mounting tape is the ideal companion to the impact anchor. It is used to attach pipes to concrete, and sometimes also cables. The high-quality plastic coating protects both the tape and the pipes to be fixed from damage. The metal versions are galvanized steel and can therefore withstand high mechanical loads. The mounting tapes generally have a length of 10 m in the packaging unit.
Lieske Part No.: 2135541

The metal mounting tape is the ideal companion to the impact anchor. It is used to attach pipes to concrete, and sometimes also cables. The high-quality plastic coating protects both the tape and the pipes to be fixed from damage. The metal versions are galvanized steel and can therefore withstand high mechanical loads. The mounting tapes generally have a length of 10 m in the packaging unit.
Lieske Part No.: 681983

The 30 meter long knotted chain with a thickness of 2.5x35 mm for use in accordance with DIN 5686. It is housed in a sealable and reusable bucket with a capacity of 5 liters. The steel chain has a breaking load of 440 N and is galvanized/electrolytically galvanized.
Lieske Part No.: 1062765

Der Sammelhalter ist geeignet für die schnelle Verlegung von Leitungen in Zwischendecken an Wand oder Decke, mittels Betonnagler oder Schlagmontage, ohne weitere Hilfsmittel.
Individuelle Installationsmöglichkeiten ermöglichen hohe Flexibilität und maximale Zeiteinsparung durch neue Geometrie des Befestigungssatelliten.

. Montagemöglichkeit 1:
Konventionelle Befestigung mit Schlagdübel, Schraube (empfohlen wird eine Flachkopfschraube 4,5x50) oder Steckdübel
. Montagemöglichkeit 2:
Direktbefestigung mit Betonnagler u.a. der Marken Bosch, Fischer und Spit Verkaufseinheit: 100 ST.
Lieske Part No.: 877396

Der Sammelhalter ist geeignet für die schnelle Verlegung von Leitungen in Zwischendecken an Wand oder Decke, mittels Betonnagler oder Schlagmontage, ohne weitere Hilfsmittel.
Individuelle Installationsmöglichkeiten ermöglichen hohe Flexibilität und maximale Zeiteinsparung durch neue Geometrie des Befestigungssatelliten.

. Montagemöglichkeit 1:
Konventionelle Befestigung mit Schlagdübel, Schraube (empfohlen wird eine Flachkopfschraube 4,5x50) oder Steckdübel
. Montagemöglichkeit 2:
Direktbefestigung mit Betonnagler u.a. der Marken Bosch, Fischer und Spit Verkaufseinheit: 100 ST.
Lieske Part No.: 877350

Sales unit: 1 ST.
Lieske Part No.: 2022010

Zugentlastungsklemme, Gehäuse aus Edelstahl 1.4301, Spannbereich 8,5 bis 18 mm Ø, Zugentlastung bis 2,5 kN, z.B. für hängende Kabel, - Spannbereich 8,5 mm bis 18 mm Durchmesser, - Hakendurchmesser: 26 mm, - maximale Zugbelastung 2,5 kN, - Gehäuse aus Edelstahl 1.4301, - Spannbacken und Führungsklammern aus glasfaserverstärktem PA (schwarz) Verkaufseinheit: 1 ST.
Lieske Part No.: 835234

Mounting clamp for attachment to the mast. Mast diameter 95-114 mm. Stainless steel with galvanized screw material. Sliding span for different mounting heights.
Lieske Part No.: 1334034

Mounting clamp for attachment to the mast. Mast diameter 115-135 mm. Stainless steel with galvanized screw material. Sliding span for different attachment heights.
Lieske Part No.: 1334033

Nail clamp TC2-3 (1.4/15/11mm) natural 100 pieces/pack. Safety pins that bend instead of breaking. Extremely impact-resistant and at the same time highly resistant to heat, cold and acid. Flexible, each clamp type covers several cable cross-sections. Pins in different thicknesses, made of both galvanized steel and stainless steel. Large range of clamps in different designs and colors, with different dimensions and pins. Clamp holds itself on the cable (clip property). Clamps: impact-resistant PP (polypropylene) UV-resistant / halogen-free Pins: hardened and galvanized steel.
Sales unit: 100 pieces
Lieske Part No.: 1859040

Nail clamp TC4-6 (1.4/20/14mm) natural. Safety pins that bend instead of breaking. Extremely impact-resistant and at the same time highly resistant to heat, cold and acid. Flexible, each clamp type covers several cable cross-sections. Pins in various thicknesses, made of both galvanized steel and stainless steel. Large range of clamps in different designs and colors, with different dimensions and pins. Clamp holds itself on the cable (clip property). Clamps: impact-resistant PP (polypropylene) UV-resistant / halogen-free Pins: hardened and galvanized steel.
Sales unit: 100 pieces
Lieske Part No.: 1852635

Nail clamp TC 5-7 nail: (1.2/20/12mm) natural
Sales unit: 100 pieces
Lieske Part No.: 173401

Nail clamp TC5-7 (1.2/20/12mm) white. Safety pins bend these instead of breaking. Extremely impact-resistant and at the same time highly resistant to heat, cold and acid. Flexible, each clamp type covers several cable cross-sections. Pins in different thicknesses, made of both galvanized steel and stainless steel. Large range of clamps in different designs and colors, with different dimensions and pins. Clamp holds itself on the cable (clip property). Clamps: impact-resistant PP (polypropylene) UV-resistant / halogen-free Pins: hardened and galvanized steel.
Lieske Part No.: 1851484

Nail clamp TC5-7 nail: (1.2/20/12mm) grey
Sales unit: 100 pieces
Lieske Part No.: 729055

Sales unit: 100 pieces
Lieske Part No.: 511454

Nail clamp TC7-10 Nail: (1.6/30/21mm) light grey
Sales unit: 100 pieces
Lieske Part No.: 493875

Nail clamp TC 7-10 (1.6/25/16) black. Safety pins bend these instead of breaking. Extremely impact-resistant and at the same time highly resistant to heat, cold and acid. Flexible, each clamp type covers several cable cross-sections. Pins in different thicknesses, made of both galvanized steel and stainless steel. Large range of clamps in different designs and colors, with different dimensions and pins. Clamp holds itself on the cable (clip property). Clamps: impact-resistant PP (polypropylene) UV-resistant / halogen-free Pins: hardened and galvanized steel.
Sales unit: 100 pieces
Lieske Part No.: 323102

Nail clamp TC7-10 Nail: (1.6/25/16mm) light grey
Sales unit: 100 pieces
Lieske Part No.: 136488

Nail clamp TC8-12 nail: (2.0/30/19mm) white
Sales unit: 100 pieces
Lieske Part No.: 368504

Nail clamp TC8-12 nail: (2.0/30/19mm) light grey
Sales unit: 100 pieces
Lieske Part No.: 348426

Nail clamp TC8-12 nail: (2.0/35/24mm) light grey
Sales unit: 100 pieces
Lieske Part No.: 466428

Nail clamp TC8-12 (2.0/45/34mm) grey. Safety pins that bend instead of breaking. Extremely impact-resistant and at the same time highly resistant to heat, cold and acid. Flexible, each clamp type covers several cable cross-sections. Pins in different thicknesses, made of both galvanized steel and stainless steel. Large range of clamps in different designs and colors, with different dimensions and pins. Clamp holds itself on the cable (clip property). Clamps: impact-resistant PP (polypropylene) UV-resistant / halogen-free Pins: hardened and galvanized steel.
Sales unit: 100 pieces
Lieske Part No.: 1860073

Nail clamp TC 10-14 Nail: (2.5/30/17) white
Sales unit: 100 pieces
Lieske Part No.: 490752

Nail clamp TC10-14 Nail: (2.0/35/22mm) light grey
Sales unit: 100 pieces
Lieske Part No.: 237681

Nail clamp TC10-14 Nail: (2.0/30/17mm) light grey
Sales unit: 100 pieces
Lieske Part No.: 454230

Nail clamp TC10-14 (2.0/45/32) WHITE (100 pieces/pack). Safety pins bend these instead of breaking. Extremely impact-resistant and at the same time highly resistant to heat, cold and acid. Flexible - each clamp type covers several cable cross-sections. Pins in different thicknesses, made of both galvanized steel and stainless steel. Large range of clamps in different designs and colors, with different dimensions and pins. Clamp holds itself on the cable (clip property). Clamps: impact-resistant PP (polypropylene) UV-resistant / halogen-free Pins: hardened and galvanized steel.
Sales unit: 100 pieces
Lieske Part No.: 1857832

Pin clamp TC 14-20-WHITE
Sales unit: 100 pieces
Lieske Part No.: 583606

Nail clamp TC14-20 Nail: (2.0/35/18mm) white
Sales unit: 100 pieces
Lieske Part No.: 733334

Nail clamp TC14-20 Nail: (2.0/35/18mm) light grey
Sales unit: 100 pieces
Lieske Part No.: 599620

Nail clamp TC14-20 (2.0/45/28mm) light green. Safety pins that bend instead of breaking. Extremely impact-resistant and at the same time highly resistant to heat, cold and acid. Flexible, each clamp type covers several cable cross-sections. Pins in different thicknesses, made of both galvanized steel and stainless steel. Large range of clamps in different designs and colors, with different dimensions and pins. Clamp holds itself on the cable (clip property). Clamps: impact-resistant PP (polypropylene) UV-resistant / halogen-free Pins: hardened and galvanized steel.
Lieske Part No.: 1770368

Nail clamp TC18-22 Nail: (2.5/45/25mm) white
Sales unit: 50 pieces
Lieske Part No.: 725935

Nail clamp TC18-22 nail: (2.5/45/25mm) grey
Sales unit: 50 pieces
Lieske Part No.: 172301