Shrink tubing, roll, yellow, unlabeled, can be labeled with: THERMOMARK E.SLEEVE, THERMOMARK E.300 (D)/600 (D), THERMOMARK ROLLMASTER 300/600, THERMOMARK ROLL X1, THERMOMARK ROLL, THERMOMARK ROLL 2.0, THERMOMARK W, THERMOMARK X1.2, unperforated, mounting type: slide on, cable diameter range (automated processing): 1 ... 3 mm, cable diameter range: 1 ... 3.2 mm, lettering field size: 5 x 30000 mm, roll length: 30 m
Lieske Part No.: 1261890

Shrink tubing, roll, yellow, unlabeled, can be labeled with: THERMOMARK E.SLEEVE, THERMOMARK E.300 (D)/600 (D), THERMOMARK ROLLMASTER 300/600, THERMOMARK ROLL X1, THERMOMARK ROLL, THERMOMARK ROLL 2.0, THERMOMARK W, THERMOMARK X1.2, unperforated, mounting type: slide on, cable diameter range (automated processing): 1.6 ... 4.5 mm, cable diameter range: 1.6 ... 4.8 mm, lettering field size: 9 x 30000 mm, roll length: 30 m
Lieske Part No.: 1321061

Schrumpfschlauch, Rolle, gelb (RAL 1018), unbeschriftet, beschriftbar mit: THERMOMARK E.SLEEVE, THERMOMARK E.300 (D)/600 (D), THERMOMARK ROLLMASTER 300/600, THERMOMARK ROLL X1, THERMOMARK ROLL, THERMOMARK ROLL 2.0, THERMOMARK W, THERMOMARK X1.2, Kabeldurchmesserbereich: 2,1 ... 6,4 mm, unperforiert, Montageart: aufschieben, Kabeldurchmesser Bereich (automatisierte Verarbeitung): 2,1 ... 6 mm, Anzahl der Einzelschilder: 1, Rollenlänge: 25 m, Textfeldhöhe: 10 mm, Textfeldbreite: 25000 mm
Lieske Part No.: 2144347

Shrink tubing, roll, yellow, unlabeled, can be labeled with: THERMOMARK E.SLEEVE, THERMOMARK E.300 (D)/600 (D), THERMOMARK ROLLMASTER 300/600, THERMOMARK ROLL X1, THERMOMARK ROLL, THERMOMARK ROLL 2.0, THERMOMARK W, THERMOMARK X1.2, unperforated, mounting type: slide on, cable diameter range (automated processing): 3.2 ... 8.5 mm, cable diameter range: 3.2 ... 9.5 mm, lettering field size: 16 x 20000 mm, roll length: 20 m
Lieske Part No.: 1321060

Shrink tubing, roll, yellow, unlabeled, can be labeled with: THERMOMARK E.300 (D)/600 (D), THERMOMARK ROLLMASTER 300/600, THERMOMARK ROLL X1, THERMOMARK ROLL, THERMOMARK ROLL 2.0, THERMOMARK W, THERMOMARK X1.2, unperforated, mounting type: slide on, cable diameter range: 4.2 ... 12.7 mm, label size: 20 x 20000 mm, roll length: 20 m
Lieske Part No.: 1132817

Shrink tubing, roll, yellow, unlabeled, can be labeled with: THERMOMARK E.300 (D)/600 (D), THERMOMARK ROLLMASTER 300/600, THERMOMARK ROLL X1, THERMOMARK ROLL, THERMOMARK ROLL 2.0, THERMOMARK W, THERMOMARK X1.2, unperforated, mounting type: slide on, cable diameter range: 6.4 ... 19.1 mm, label size: 30 x 20000 mm, roll length: 20 m
Lieske Part No.: 1321059

Shrink tubing, roll, yellow, unlabeled, can be labeled with: THERMOMARK E.300 (D)/600 (D), THERMOMARK ROLLMASTER 300/600, THERMOMARK ROLL X1, THERMOMARK ROLL, THERMOMARK ROLL 2.0, THERMOMARK W, THERMOMARK X1.2, unperforated, mounting type: slide on, cable diameter range: 8.5 ... 25.4 mm, label size: 40 x 15000 mm, roll length: 15 m
Lieske Part No.: 1321058

Shrink tubing, roll, yellow, unlabeled, can be labeled with: THERMOMARK E.300 (D)/600 (D), THERMOMARK ROLLMASTER 300/600, THERMOMARK ROLL X1, THERMOMARK ROLL, THERMOMARK ROLL 2.0, THERMOMARK W, THERMOMARK X1.2, unperforated, mounting type: slide on, cable diameter range: 12.7 ... 38.1 mm, label size: 60 x 15000 mm, roll length: 15 m
Lieske Part No.: 1321057

Shrink tubing, roll, yellow, unlabeled, can be labeled with: THERMOMARK E.300 (D)/600 (D), THERMOMARK ROLLMASTER 300/600, THERMOMARK ROLL X1, THERMOMARK ROLL, THERMOMARK ROLL 2.0, THERMOMARK W, THERMOMARK X1.2, unperforated, mounting type: slide on, cable diameter range: 16.9 ... 50.8 mm, label size: 80 x 15000 mm, roll length: 15 m
Lieske Part No.: 1320347

Shrink tubing, roll, white, unlabeled, can be labeled with: THERMOMARK E.SLEEVE, THERMOMARK E.300 (D)/600 (D), THERMOMARK ROLLMASTER 300/600, THERMOMARK ROLL X1, THERMOMARK ROLL, THERMOMARK ROLL 2.0, THERMOMARK W, THERMOMARK X1.2, unperforated, mounting type: slide on, cable diameter range (automated processing): 1 ... 3 mm, cable diameter range: 1 ... 3.2 mm, lettering field size: 5 x 120000 mm, roll length: 120 m
Lieske Part No.: 1881552

Shrink tubing, roll, white, unlabeled, can be labeled with: THERMOMARK E.300 (D)/600 (D), THERMOMARK ROLLMASTER 300/600, THERMOMARK ROLL X1, THERMOMARK ROLL, THERMOMARK ROLL 2.0, THERMOMARK W, THERMOMARK X1.2, unperforated, mounting type: slide on, cable diameter range: 3.2 ... 9.5 mm, lettering field size: 60 x 16 mm, number of individual labels: 250
Lieske Part No.: 1261976

Shrink sleeve, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK X1.2, Perforated, Mounting type: slide on, Cable diameter: 12.7-38.1 mm
Lieske Part No.: 158111

Shrink sleeve, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK X1.2, Perforated, Mounting type: slide on, Cable diameter: 1.6-4.8 mm, Lettering field: 30 x 9 mm
Lieske Part No.: 158115

Shrink sleeve, Roll, yellow, unlabeled, can be labeled with: THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK X1.2, Perforated, Mounting type: slide on, Cable diameter: 2.1-6.4 mm, Lettering field: 60 x 10 mm
Lieske Part No.: 158122

Heat shrink tubing, roll, yellow: user-defined, perforated, mounting type: slide on, cable diameter range: 1 ... 3.2 mm, lettering field size: 15 x 5 mm
Lieske Part No.: 1882347

Heat shrink tubing, roll, yellow: user-defined, perforated, mounting type: slide on, cable diameter range: 1.6 ... 4.8 mm, lettering field size: 15 x 9 mm
Lieske Part No.: 1882713

Shrink tubing, roll, yellow, unlabeled, can be labeled with: THERMOMARK E.300 (D)/600 (D), THERMOMARK ROLLMASTER 300/600, THERMOMARK ROLL X1, THERMOMARK ROLL, THERMOMARK ROLL 2.0, THERMOMARK W, THERMOMARK X1.2, perforated, mounting type: slide on, cable diameter range: 3.2 ... 6.4 mm, lettering field size: 30 x 10 mm, number of individual labels: 2000
Lieske Part No.: 1333541

Shrink sleeve, Roll, white, unlabeled, can be labeled with: THERMOMARK W, THERMOMARK ROLL, THERMOMARK X1.2, THERMOMARK ROLL X1, Perforated, Lettering field: 15 x 10 mm
Lieske Part No.: 334465

Shrink tubing, roll, white/black, unlabeled, can be labeled with: THERMOFOX, THERMOMARK GO, THERMOMARK GO.K, mounting type: slide on, cable diameter range: 1 ... 3.2 mm, lettering field size: endless x 3.1 mm, number of individual labels: 1
Lieske Part No.: 1131620

Shrink tubing, roll, white/black, unlabeled, can be labeled with: THERMOFOX, THERMOMARK GO, THERMOMARK GO.K, mounting type: slide on, cable diameter range: 1.6 ... 4.8 mm, lettering field size: endless x 5.4 mm, number of individual labels: 1
Lieske Part No.: 102949

Shrink tubing, roll, white/black, unlabeled, can be labeled with: THERMOFOX, THERMOMARK GO, THERMOMARK GO.K, mounting type: slide on, cable diameter range: 2.1 ... 6.4 mm, lettering field size: endless x 8.2 mm, number of individual labels: 1
Lieske Part No.: 102959

Shrink tubing, roll, white/black, unlabeled, can be labeled with: THERMOFOX, THERMOMARK GO, THERMOMARK GO.K, mounting type: slide on, cable diameter range: 3.2 ... 9.5 mm, lettering field size: endless x 12.8 mm, number of individual labels: 1
Lieske Part No.: 102975

Schrumpfschlauch, Rolle, Farbmix (Mixed Color), unbeschriftet, beschriftbar mit: THERMOFOX, THERMOMARK GO, THERMOMARK GO.K, Kabeldurchmesserbereich: 1,6 ... 3,2 mm, Montageart: aufschieben, Anzahl der Einzelschilder: 1, Textfeldhöhe: 3,7 mm, Textfeldbreite: 1800 mm
Lieske Part No.: 688109

Schrumpfschlauch, Rolle, Farbmix (Mixed Color), unbeschriftet, beschriftbar mit: THERMOFOX, THERMOMARK GO, THERMOMARK GO.K, Kabeldurchmesserbereich: 2,4 ... 4,8 mm, Montageart: aufschieben, Anzahl der Einzelschilder: 1, Textfeldhöhe: 6,1 mm, Textfeldbreite: 1800 mm
Lieske Part No.: 689560

Schrumpfschlauch, Rolle, Farbmix (Mixed Color), unbeschriftet, beschriftbar mit: THERMOFOX, THERMOMARK GO, THERMOMARK GO.K, Kabeldurchmesserbereich: 3,2 ... 6,4 mm, Montageart: aufschieben, Anzahl der Einzelschilder: 1, Textfeldhöhe: 8,5 mm, Textfeldbreite: 1800 mm
Lieske Part No.: 689561

Schrumpfschlauch, Rolle, Farbmix (Mixed Color), unbeschriftet, beschriftbar mit: THERMOFOX, THERMOMARK GO, THERMOMARK GO.K, Kabeldurchmesserbereich: 4,8 ... 9,5 mm, Montageart: aufschieben, Anzahl der Einzelschilder: 1, Textfeldhöhe: 12,5 mm, Textfeldbreite: 1800 mm
Lieske Part No.: 689562

Schrumpfschlauch, Rolle, Farbmix (Mixed Color), unbeschriftet, beschriftbar mit: THERMOMARK GO, THERMOFOX, THERMOMARK GO.K, Kabeldurchmesserbereich: 1,6 ... 3,2 mm, Montageart: aufschieben, Anzahl der Einzelschilder: 1, Textfeldhöhe: 3,7 mm, Textfeldbreite: 1800 mm
Lieske Part No.: 1296297

The thin-walled 3:1 heat shrink tubing made of cross-linked polyolefin is flexible and flame-retardant. Thanks to the ideal 3:1 shrink ratio, these shrink tubings cover a wide range of applications with just a few sizes.
The RED heat shrink tubing is delivered in a practical dispenser box. The centimeter ruler integrated into the cardboard box allows sections to be measured and cut quickly and precisely for the work currently being carried out. The box also saves space during transport and storage and keeps the goods free of dust and dirt. Perfect for varying insulation work in the factory or on site.
Technical data:
. Storage: -10 °C to +40 °C, relative humidity: /<75 %
. Shelf life: 24 months
Lieske Part No.: 2022225

The thin-walled 3:1 heat shrink tubing made of cross-linked polyolefin is flexible and flame-retardant. Thanks to the ideal 3:1 shrink ratio, these shrink tubings cover a wide range of applications with just a few sizes.
The RED heat shrink tubing is delivered in a practical dispenser box. The centimeter ruler integrated into the cardboard box allows sections to be measured and cut quickly and precisely for the work currently being carried out. The box also saves space during transport and storage and keeps the goods free of dust and dirt. Perfect for varying insulation work in the factory or on site.
Technical data:
. Storage: -10 °C to +40 °C, relative humidity: /<75 %
. Shelf life: 24 months
Lieske Part No.: 2022226

The thin-walled 3:1 heat shrink tubing made of cross-linked polyolefin is flexible and flame-retardant. Thanks to the ideal 3:1 shrink ratio, these shrink tubings cover a wide range of applications with just a few sizes.
The RED heat shrink tubing is delivered in a practical dispenser box. The centimeter ruler integrated into the cardboard box allows sections to be measured and cut quickly and precisely for the work currently being carried out. The box also saves space during transport and storage and keeps the goods free of dust and dirt. Perfect for varying insulation work in the factory or on site.
Technical data:
. Storage: -10 °C to +40 °C, relative humidity: /<75 %
. Shelf life: 24 months
Lieske Part No.: 2022227

The thin-walled 3:1 heat shrink tubing made of cross-linked polyolefin is flexible and flame-retardant. Thanks to the ideal 3:1 shrink ratio, these shrink tubings cover a wide range of applications with just a few sizes.
The RED heat shrink tubing is delivered in a practical dispenser box. The centimeter ruler integrated into the cardboard box allows sections to be measured and cut quickly and precisely for the work currently being carried out. The box also saves space during transport and storage and keeps the goods free of dust and dirt. Perfect for varying insulation work in the factory or on site.
Technical data:
. Storage: -10 °C to +40 °C, relative humidity: /<75 %
. Shelf life: 24 months
Lieske Part No.: 2022228

The thin-walled 3:1 heat shrink tubing made of cross-linked polyolefin is flexible and flame-retardant. Thanks to the ideal 3:1 shrink ratio, these shrink tubings cover a wide range of applications with just a few sizes.
The RED heat shrink tubing is delivered in a practical dispenser box. The centimeter ruler integrated into the cardboard box allows sections to be measured and cut quickly and precisely for the work currently being carried out. The box also saves space during transport and storage and keeps the goods free of dust and dirt. Perfect for varying insulation work in the factory or on site.
Technical data:
. Storage: -10 °C to +40 °C, relative humidity: /<75 %
. Shelf life: 24 months
Lieske Part No.: 2022229

The thin-walled 3:1 heat shrink tubing made of cross-linked polyolefin is flexible and flame-retardant. Thanks to the ideal 3:1 shrink ratio, these shrink tubings cover a wide range of applications with just a few sizes.
The RED heat shrink tubing is delivered in a practical dispenser box. The centimeter ruler integrated into the cardboard box allows sections to be measured and cut quickly and precisely for the work currently being carried out. The box also saves space during transport and storage and keeps the goods free of dust and dirt. Perfect for varying insulation work in the factory or on site.
Technical data:
. Storage: -10 °C to +40 °C, relative humidity: /<75 %
. Shelf life: 24 months
Lieske Part No.: 2022230

The thin-walled 3:1 heat shrink tubing made of cross-linked polyolefin is flexible and flame-retardant. Thanks to the ideal 3:1 shrink ratio, these shrink tubings cover a wide range of applications with just a few sizes.
The RED heat shrink tubing is delivered in a practical dispenser box. The centimeter ruler integrated into the cardboard box allows sections to be measured and cut quickly and precisely for the work currently being carried out. The box also saves space during transport and storage and keeps the goods free of dust and dirt. Perfect for varying insulation work in the factory or on site.
Technical data:
. Storage: -10 °C to +40 °C, relative humidity: /<75 %
. Shelf life: 24 months
Lieske Part No.: 2022231

The medium-walled RED shrink tubing with adhesive coating is supplied in 1-meter bars.
The following properties characterize the shrink tubing:
. provides very good protection against environmental influences
. has good electrical and mechanical properties and is ideal for low-voltage applications
. UV-resistant and halogen-free
Technical data
. Storage: -10 °C to +40 °C, relative humidity: \<75 %
. Shelf life: 24 months
. Minimum temperature for complete shrinkage: +120 °C
. Longitudinal shrinkage 0 ± 10 % max.
Note: Due to the risk of fire, shrinking must not be carried out using an open flame.
Lieske Part No.: 2022928

The medium-walled RED shrink tubing with adhesive coating is supplied in 1-meter bars.
The following properties characterize the shrink tubing:
. provides very good protection against environmental influences
. has good electrical and mechanical properties and is ideal for low-voltage applications
. UV-resistant and halogen-free
Technical data
. Storage: -10 °C to +40 °C, relative humidity: \<75 %
. Shelf life: 24 months
. Minimum temperature for complete shrinkage: +120 °C
. Longitudinal shrinkage 0 ± 10 % max.
Note: Due to the risk of fire, shrinking must not be carried out using an open flame.
Lieske Part No.: 2022929

The medium-walled RED shrink tubing with adhesive coating is supplied in 1-meter bars.
The following properties characterize the shrink tubing:
. provides very good protection against environmental influences
. has good electrical and mechanical properties and is ideal for low-voltage applications
. UV-resistant and halogen-free
Technical data
. Storage: -10 °C to +40 °C, relative humidity: \<75 %
. Shelf life: 24 months
. Minimum temperature for complete shrinkage: +120 °C
. Longitudinal shrinkage 0 ± 10 % max.
Note: Due to the risk of fire, shrinking must not be carried out using an open flame.
Lieske Part No.: 2022930

The medium-walled RED shrink tubing with adhesive coating is supplied in 1-meter bars.
The following properties characterize the shrink tubing:
. provides very good protection against environmental influences
. has good electrical and mechanical properties and is ideal for low-voltage applications
. UV-resistant and halogen-free
Technical data
. Storage: -10 °C to +40 °C, relative humidity: \<75 %
. Shelf life: 24 months
. Minimum temperature for complete shrinkage: +120 °C
. Longitudinal shrinkage 0 ± 10 % max.
Note: Due to the risk of fire, shrinking must not be carried out using an open flame.
Lieske Part No.: 2022931

The medium-walled RED shrink tubing with adhesive coating is supplied in 1-meter bars.
The following properties characterize the shrink tubing:
. provides very good protection against environmental influences
. has good electrical and mechanical properties and is ideal for low-voltage applications
. UV-resistant and halogen-free
Technical data
. Storage: -10 °C to +40 °C, relative humidity: \<75 %
. Shelf life: 24 months
. Minimum temperature for complete shrinkage: +120 °C
. Longitudinal shrinkage 0 ± 10 % max.
Note: Due to the risk of fire, shrinking must not be carried out using an open flame.
Lieske Part No.: 2022932

The medium-walled RED shrink tubing with adhesive coating is supplied in 1-meter bars.
The following properties characterize the shrink tubing:
. provides very good protection against environmental influences
. has good electrical and mechanical properties and is ideal for low-voltage applications
. UV-resistant and halogen-free
Technical data
. Storage: -10 °C to +40 °C, relative humidity: \<75 %
. Shelf life: 24 months
. Minimum temperature for complete shrinkage: +120 °C
. Longitudinal shrinkage 0 ± 10 % max.
Note: Due to the risk of fire, shrinking must not be carried out using an open flame.
Lieske Part No.: 2022933

The medium-walled RED shrink tubing with adhesive coating is supplied in 1-meter bars.
The following properties characterize the shrink tubing:
. provides very good protection against environmental influences
. has good electrical and mechanical properties and is ideal for low-voltage applications
. UV-resistant and halogen-free
Technical data
. Storage: -10 °C to +40 °C, relative humidity: \<75 %
. Shelf life: 24 months
. Minimum temperature for complete shrinkage: +120 °C
. Longitudinal shrinkage 0 ± 10 % max.
Note: Due to the risk of fire, shrinking must not be carried out using an open flame.
Lieske Part No.: 2022934

The medium-walled RED shrink tubing with adhesive coating is supplied in 1-meter bars.
The following properties characterize the shrink tubing:
. provides very good protection against environmental influences
. has good electrical and mechanical properties and is ideal for low-voltage applications
. UV-resistant and halogen-free
Technical data
. Storage: -10 °C to +40 °C, relative humidity: \<75 %
. Shelf life: 24 months
. Minimum temperature for complete shrinkage: +120 °C
. Longitudinal shrinkage 0 ± 10 % max.
Note: Due to the risk of fire, shrinking must not be carried out using an open flame.
Lieske Part No.: 2022935

Shelf for shrink tubing boxes
The shrink tubing shelf holds up to 6 RED® shrink tubing mini boxes and brings order to the workshop or assembly & service vehicle. The scissors supplied and attached by a chain allow you to cut off the required section of shrink tubing at any time.
Dimensions: 18.3 x 31.6 x 26.2 mm
Color: red
This package
contains the following shrink tubing mini boxes.
DEHA No. 5116532, WSB 3:1 Box 3.0-1.0
DEHA No. 5116533, WSB 3:1 Box 6.0-2.0
DEHA No. 5116534, WSB 3:1 Box 9.0-3.0 DEHA No.
5116535, WSB 3:1 Box 12.0-4.0
DEHA No. 5116536, WSB 3:1 Box 18.0-6.0
DEHA No. 5116537, WSB 3:1 Box 24.0-8.0
Lieske Part No.: 2072243

Use the 3M Scotchlok UR-2 connector with its special insulation displacement contact to create a reliable electrical connection to wires in communication cables. The conductor is inserted into the U-contact connector, creating a spring-loaded connection. This removes the insulation and presses all conductors together with a firm, elastic pressure in one motion. The conductor insulation does not need to be removed. 3M Scotchlok connectors are factory filled with sealant that protects against corrosion and moisture. They are also available in a dry version for indoor use. Various sizes and wire combinations are available to meet all requirements. Solid wire size 0.4 mm to 0.9 mm with a maximum insulation diameter of 2.08 mm.
Sales unit: 100 pieces
Lieske Part No.: 695350

3MT Cold Shrink Insulation Tubing 8420 and 8430 are EPDM tubing that is a unique cold shrink connection system. The products are supplied pre-stretched on a retractable support coil, allowing efficient and easy assembly. When the support coil is retracted after the tubing is positioned, the tubing shrinks to form a watertight seal. The active deformation of the specially formulated material ensures a permanent seal and insulation from the environment.
3MT Cold Shrink Insulation Tubing Series 8420 and 8430 are especially useful for electrical insulation on all solid dielectric (rubber or plastic) insulated wires and cable splices up to 1,000 V. They are suitable for indoor and outdoor use. They often provide good physical protection and environmental shielding for communication lines and other non-electrical applications (including cable jacket repairs). The operating temperature range is -40 °C to 90 °C. In applications where the product is continuously exposed to UV radiation, it should be wrapped with, for example, Scotch® Super 33+T Vinyl Insulation Tape or Scotch® Self-Vulcanizing Silicone Rubber Tape 70.
Sales unit: 10 pieces
Lieske Part No.: 218207

8420 and 8430 cold shrink insulation tubing is EPDM tubing that is a unique cold shrink connection system. The products are supplied pre-stretched on a retractable support coil, allowing efficient and easy assembly. When the support coil is retracted after the tubing is positioned, the tubing shrinks to form a watertight seal. The active deformation of the specially formulated material ensures a permanent seal and insulation from the environment.
8420 and 8430 series cold shrink insulation tubing is especially useful for electrical insulation on all solid dielectric (rubber or plastic) insulated wires and cable splices up to 1,000 V. They are suitable for indoor and outdoor use. They often provide good physical protection and environmental shielding on communication lines and other non-electrical applications (including cable jacket repairs). The temperature range is -40 °C to 90 °C. In applications where the product is continuously exposed to UV radiation, it should be wrapped with Super 33+T vinyl insulation tape or Self-vulcanizing silicone rubber tape 70, for example.
Sales unit: 10 pieces
Lieske Part No.: 876880

Heat-shrink compression connectors for electrically perfect connections and effective protection against moisture.
The 3MT ScotchlokT heat-shrink compression connectors can be used in installation technology wherever you want to connect single-wire conductors using compression technology. After heat-shrinking, the connectors also provide insulation that protects against moisture. This makes them particularly suitable for use in non-air-conditioned rooms or outdoors. The seamless connectors are made of tinned copper and are surrounded by an insulating layer of polyolefin with an inner coating of hot-melt adhesive. They can withstand a maximum voltage of 600 volts and their maximum operating temperature is 105 °C. The compression connectors are available in red, blue and yellow with a maximum conductor cross-section between 1.0 and 6.0 square millimeters. The maximum corresponds to the conductor cross-section. The ScotchlokT heat-shrink compression connectors are UL and CSA listed for use on flexible cables up to 600V.
Sales unit: 125 pieces
Lieske Part No.: 118268

The HDCW heat shrink tubing is designed for the quick repair of damaged cable sheaths. This winding sleeve is suitable for use for cable and splice insulation up to 1,000 V and can be used as cable sheath material up to 35 kV. It is made of cross-linked polyolefin and has an adhesive that ensures a seal against moisture.
HDCW heat shrink tubing offers excellent protection against mechanical stress. This winding sleeve with hot melt adhesive ensures a permanent and moisture-resistant seal. It is made of cross-linked polyolefin that can withstand adverse application conditions. The design of the winding sleeve enables installation in confined spaces with normal heating. Meets the requirements of ANSI C119.1 and is RoHS compliant.
Sales unit: 5 pieces
Lieske Part No.: 846896

The HDCW heat shrink tubing is designed for the quick repair of damaged cable sheaths. This winding sleeve is suitable for use for cable and splice insulation up to 1,000 V and can be used as cable sheath material up to 35 kV. It is made of cross-linked polyolefin and has an adhesive that ensures a seal against moisture.
HDCW heat shrink tubing offers excellent protection against mechanical stress. This winding sleeve with hot melt adhesive ensures a permanent and moisture-resistant seal. It is made of cross-linked polyolefin that can withstand adverse application conditions. The design of the winding sleeve enables installation in confined spaces with normal heating. Meets the requirements of ANSI C119.1 and is RoHS compliant.
Sales unit: 5 pieces
Lieske Part No.: 804885

The HDCW heat shrink tubing is designed for the quick repair of damaged cable sheaths. This winding sleeve is suitable for use for cable and splice insulation up to 1,000 V and can be used as cable sheath material up to 35 kV. It is made of cross-linked polyolefin and has an adhesive that ensures a seal against moisture.
HDCW heat shrink tubing offers excellent protection against mechanical stress. This winding sleeve with hot melt adhesive ensures a permanent and moisture-resistant seal. It is made of cross-linked polyolefin that can withstand adverse application conditions. The design of the winding sleeve enables installation in confined spaces with normal heating. Meets the requirements of ANSI C119.1 and is RoHS compliant.
Sales unit: 5 pieces
Lieske Part No.: 496222